Riva RC6602HD-5311 Manuel utilisateur

www.rivatech.de

Quick Installation Guide

This manual provides instructions for quick installation and basic configuration of your IP device.

www.rivatech.de

Step1. Connect cables to IP device

Connect required cables to the device including the power cable, LAN cable, and other

optional cables. To see the correct positions of all connectors, refer to the following image

below.

The device is polarity sensitive. Incorrect power connection

may cause malfunction or damage to the IP device.

Caution

Power Adaptor Connector (DC

12V)

* Models herein and their appearance are subject to change without any prior notice.

IPN6602HD-5215

DCBA

A : DO-

B : DO+

C : DI+

D : DI-

Red : AIN

White : AOUT

Cable arrange

IPN6602HD-5215

DCBA

A : DO-

B : DO+

C : DI+

D : DI-

Red : AIN

White : AOUT

Cable arrange

A: DO-

B: DO+

C: DI+

D: DI-

Power Input

(12VDC)

(

LAN Port

DCBA

Clamping Core

*Use to prevent

electromagnetic

interference

www.rivatech.de

Step2. Install IP device

1) Place the installation template that is provided in the package on the

desired position of installation.

2) Drill four holes on the template and insert anchor blocks into the

holes. Fasten the camera housing with screws.

3) Make sure the cables are properly connected to the camera by

referring to the Step 1.

4) Adjust the camera to the desired angle by unscrew the joints by

referring to the following pictures.

Adjust this joint to

install it on the wall

Tiling adjustment

Panning adjustment

The camera may fall off the ceiling even after the proper installation and

mounting. To prevent any accident, make sure the ceiling is firm and

stable enough to support the camera. If any reinforcement is needed,

consult with your safety personnel and proceed with the installation.

Caution

www.rivatech.de

Step3. Adjust the lens focus

1) Check the video output on a Web browser. (Refer to Step 5 for more details.)

2) To adjust the zoom, focus and etc., open the bottom bracket by using driver.

Step4. Set up network environment

The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of

the device from converting the MAC address’s hexadecimal numbers, which is attached to the

device. Be sure that the device and PC are on a same area network before running the

installation.

IPN6602HD-5311 IPN6602HD-5215

TELE

WIDE NEAR

FAR AF

NT/PAL

F/D

VOUT

VOUT F/D

NT/PAL

TELE WIDE

FAR NEAR

TELE/WIDE: Zoom

FAR/NEAR: Focus

A/F: Auto Focus

NT/PAL: NTSC/PAL

IPN6602HD-5311 IPN6602HD-5215

TELE

WIDE NEAR

FAR AF

NT/PAL

RESET

VOUT

NT/PAL

TELE WIDE

FAR NEAR

RESET

*Video out uses only for installation and works for 3

minutes when PAL/NTSC button is pushed.

* The default is no video output, but whenever you

push the button the video output status is changed and

repeated as follow:

No video output -> PAL-> NTSC

www.rivatech.de

Generic IP Environment

In case of generic private network environment where IP address 192.168.XXX.XXX are

used, users may view the live streaming images on a web page using the device’s default IP

address:

1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal

Conversion Chart at the end of the manual.

(The MAC address of the device is attached on the side or bottom of the device.)

2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.

3. Web streaming and device configurations are supported through ActiveX program. When

the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe.

MAC address = 00-13-23-01-14-B1 →IP address = 192.168.20.177

Convert the last two set of hexadecimal numbers to decimal numbers.

www.rivatech.de

Custom IP Environment

IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de

homepage.

IPAdminTool is a management tool, which automatically scans all of the network products for

users to perform administrative tasks, which includes network configurations, firmware update,

device reboot, and device organizations.

To modify the device’s default IP address for customized network area;

1. Find the device from the IPAdminTool’s list and highlight the device’s name.

2. Right-click the mouse and select “IP Address”; IP Setup window appears.

www.rivatech.de

3. In the IP Setup’s window, information under ‘Local Network information’ displays the

user/PC’s network area information. Those information need to be incorporated to the

IP Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP

Address, which are to be the unique numbers for the device. Refer to the image above

for the setting

4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user

name and password, enter the default value for the administrator account (case-

sensitive) as below:

ID:

root

Password:

pass

PC environment Info

Give new unique IP address in

last two sets and mirror other

information in other boxes

www.rivatech.de

Step5. View video on web page

Once the device has the proper IP address, users can view the live streaming images

through a web browser.

The default username and password is

root / pass

1. When the device’s web address is accessed, the browser asks to install the ActiveX.

Click Allow.

2. Setup.exe installation link or pop-up window appears, depends on Microsoft® Internet

Explorer version. Proceed with rest of setup installation.

www.rivatech.de

Caution

3. Follow the instructions of the dialog boxes and complete the installation. Once the

installation is complete, start the web browser again and check if video stream is

displayed in the main view frame.

If “

This software requires the Microsoft XML Parser V6 or higher.

Please download MSXML6 from the Microsoft website to continue.

Error code: Cannot create XMLDOMDocument.

” message appears,

download and install the Microsoft Core XML Services (MSXML)

6.0.

www.rivatech.de

Rebooting

Perform the following procedures to reset your device:

1. While the device is on, press the reset button for 1~2 seconds.

2. Wait for the system to reboot.

Resetting to the Factory Default Settings

When reset the device to the factory default setting, all parameters including the IP address

will be initialized.

To proceed back to the Factory Default reset:

1. While the device is on, press reset button and hold.

2. Release the Reset button after about 5 seconds when green LED blinks at rate of 200ms.

3. Wait for the system to reboot.

More Information

To learn more about using other features of your devices, refer to the manuals as “Web

Interface Manual” or “VCAsys_Online_Help”, which is available on USB stick or on

www.rivatech.de homepage.

Autres manuels pour RC6602HD-5311

Table des matières

Autres manuels Riva Caméra de sécurité

Riva

Riva RC4602HD-6416 Manuel utilisateur

Riva

Riva RC6802HD-6217 Manuel utilisateur

Riva

Riva RC3102HD-5211 Manuel utilisateur

Riva

Riva RC4202HD Manuel utilisateur

Riva

Riva RC3702HD-5314 Manuel utilisateur

Riva

Riva RC6702HD-6211 Manuel utilisateur

Riva

Riva RC3702HD-5314 Manuel utilisateur

Riva

Riva RC3402HD-6211R Manuel utilisateur

Riva

Riva RC3202HD-6111 Manuel utilisateur

Riva

Riva RC3502HD-5211 Manuel utilisateur

Riva

Riva RC100 Manuel utilisateur

Riva

Riva RC6702HD-6311 Manuel utilisateur

Riva

Riva RC3302HD-5344 Manuel utilisateur

Riva

Riva RC8102HD-6111T Manuel utilisateur

Riva

Riva RC100 Manuel utilisateur

Riva

Riva RC4100-1212-27 Manuel utilisateur

Riva

Riva RC6702SV-7311 Manuel utilisateur

Riva

Riva RC4602SV-7416A-30 Manuel utilisateur

Riva

Riva RC3512HD-6311IR Manuel utilisateur

Riva

Riva RC362HD Manuel utilisateur

Riva

Riva RC5510 Manuel utilisateur

Riva

Riva IPX5502HD-6415-05 Manuel utilisateur

Riva

Riva RC302SV-5117 Manuel utilisateur

Riva

Riva RC3502HD-5311IR Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur