RIOTEC LS6000B series Manuel utilisateur
Laser Barcode Scanner
Model no.
LS6000B,LS6000Z
QUICK GUIDE
2
INTRODUCTION
LS6000B / LS6000Z laser barcode scanners series have incorporated the latest
wireless blue-tooth / Zig-bee technology. The technology provides customer with
the freedom of mobility, with long communication range from the charging
cradle.
The bar code scanner requires establishing communications with its charging
cradle (built-in dongle). After communications have been established between
the scanner and charging cradle, futures bar code scans will be transmitted from
the scanner to the cradle and from the cradle to the host.
For power supply, the charging cradle of LS6000B / LS6000Z also works as a
battery charger for the scanner. Users can plug in 5V DC power adaptor for
power charge of the scanner.
Package of LS6000B / LS6000Z series should contain:
1. LS6000B or LS6000Z Laser Barcode Scanner
(Rechargeable Li-Ion battery pack inside)
2. Charging Cradle with USB cable & DC plug
3. Power Adaptor (5V/1A)
4. User’s Manual
RED BLUE ORANGE
ON Not read Good read
Continual ON
Sleeping mold (If scanner
not in use, will automatic
switch to sleeping mode
after 30 min.)
Low power
Blinking Wireless connection not
linked Charging
Charging Cradle
Buzzer
Exit Window
Trigger
Handle
Charging
3 indicators (LED)
USB dongle
USB Zig-bee dongle
3
INSTALLATION
Insert the plug on the free end of the Communications Cable into the
appropriate connector on the host as below described:
USB Connection (RS232 data format)
1. Install the software “PL-2303 Driver Installer.exe” to the host system
for LS6000B / LS6000Z series.
2. Connect scanner cradle to the USB port on the host system.
3. Go to My Computer ÆOne click right button of mouse ÆAdministrate
ÆDevice Administrator ÆConnect Port (COM and LPT).
4. Choose Prolific USB-to-Serial Com Port, and see identify COM number,
ex. COM 5.
5. Go to START ÆPrograms ÆAccessories ÆCommunications Æ
Hyper Terminal.
Detail set up on the Hyper Terminal, please see at the Figure 1 to Figure 3.
Connec
t
with hos
t
4
Figure 1
Figure 2
Figure 3
N
o need to ke
y
-in
Step 1: key-in the identify
COM number
Step 1: key-in a file name
Step 2: select the first
Step 3: press OK
Step 2: press OK
Row 1: key-in “9600”
Row 2: key-in “8”
Row 3: key-in “none”
Row 4: key-in “1”
Row 5: key-in “none”
Press OK
Step 1: key-in the identify
COM number, ex.
COM 5
Step 2: press OK
5
6. Start to aim the scanner at a bar code, you may see data shown on the hyper
terminal.
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have scanned the incorrect codes,
please scan the “Reset Configuration to Defaults” barcode. This will reset the
scanner to its factory settings.
LS 6000B or LS6000Z
Tip
Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces
directly back into the scanner from the barcode label is known as specular reflection
which will create a "dead zone" where decoding is difficult. Practice a few times to
find what range of angles works best.
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window may
affect scanning accuracy.
Wipe the scanner window gently with a lens tissue or other material suitable for
cleaning optical material.
Do not spray water or other cleaning liquids directly onto the window.
6
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
7
1) this device may not cause interference interference and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Autres manuels pour LS6000B series
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels RIOTEC Lecteur de codes-barres
RIOTEC
RIOTEC RIOSCAN iCR6307AS Manuel utilisateur
RIOTEC
RIOTEC LS6322A Manuel utilisateur
RIOTEC
RIOTEC RIOSCAN iLS6300FS Manuel utilisateur
RIOTEC
RIOTEC OM7220J Manuel utilisateur
RIOTEC
RIOTEC iLS6303ABQ Manuel utilisateur
RIOTEC
RIOTEC iLS6300JBU Manuel utilisateur
RIOTEC
RIOTEC CR6300C Manuel utilisateur
RIOTEC
RIOTEC iLS6302J BQ Manuel utilisateur
RIOTEC
RIOTEC LS6300E Manuel utilisateur
RIOTEC
RIOTEC OM7520M Manuel utilisateur
RIOTEC
RIOTEC iLS6303ABQ Manuel utilisateur
RIOTEC
RIOTEC DC9270D Manuel utilisateur
RIOTEC
RIOTEC FS5107A Manuel utilisateur
RIOTEC
RIOTEC iDC9272A Manuel utilisateur
RIOTEC
RIOTEC LS6300E Manuel utilisateur
RIOTEC
RIOTEC DC9257A Manuel utilisateur
RIOTEC
RIOTEC DC9250 Manuel utilisateur
RIOTEC
RIOTEC iLS6302ABU Manuel utilisateur
RIOTEC
RIOTEC LS6302A Manuel utilisateur
RIOTEC
RIOTEC OM7228J Manuel utilisateur
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
