Rimage Professional 5100N Manuel utilisateur

1 2000447_E

Rimage Professional 5100N and 5300N

Maintain the Professional

Use the information in this section to keep your Professional in optimal operating

condition.

,Warning! Always power off the autoloader and unplug the power cord before

you access the embedded PC.

Overview

Regular preventative maintenance of your Professional can help to ensure

error-free recordings and clean printed labels. Maintenance involves cleaning the

system and aligning the Everest printer on top of the autoloader.

Note: The Everest printer has its own maintenance requirements. Refer to

your Rimage Everest User Guide for information.

Cautionary Information

nCaution: To avoid damaging the Professional during maintenance:

• Never use oils, silicone, or other lubricants on any part of the

Professional.

• Use only non-abrasive cleaners to wipe down the surfaces of your

Professional.

• Never use cleaners to clean the embedded PC.

• Avoid pouring cleaners directly onto the Professional. Instead, apply the

cleaner to the cloth rst.

• Observe precautions for electrostatic-sensitive devices whenever you

access the embedded PC.

English

2000447_E 2

Maintain the Professional

Preventative Maintenance Schedule

Use the following table as a guideline for how often to perform preventative

maintenance tasks.

Note: Your system may require more frequent maintenance if used in a

dusty area, such as a store or warehouse.

Before you begin:

1. Power off the Professional.

2. Disconnect the power cord.

-Important! Failure to follow the maintenance schedule outlined below may

void your warranty.

Tool Task Frequency

Lint-free cloth

Non-abrasive, all-

purpose cleaner

Wipe down all surfaces of the

autoloader, including:

• Sides and top

• Input bins

• Output trays

• Output bin

• Base (remove the input bin rst)

• Top surface on the lift arm

Weekly

Can of

compressed air

Remove dust and debris from the

fans at the back of the autoloader.

Monthly

Vacuum Remove dust and debris from

the openings at the back of the

autoloader.

Monthly

Can of

compressed air

Remove the side panels and remove

all dust from the embedded PC.

Monthly

Torx T25 driver Align the Everest printer. Refer to

the Align the Printer section in

the Rimage Professional User Guide.

On installation

and as needed

English

Autres manuels pour Professional 5100N

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rimage Matériel informatique

Rimage

Rimage Producer III Manuel utilisateur

Rimage

Rimage CDPR3 Manuel utilisateur

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuel utilisateur

Rimage

Rimage Producer III 6100 Manuel utilisateur

Rimage

Rimage Producer III 6100N Manuel utilisateur

Rimage

Rimage Producer III series Manuel utilisateur

Rimage

Rimage AutoPrinter Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur