Rigol DS4024 Manuel utilisateur

RIGOL DS4024 OSCILLOSCOPE

STUDENT INNOVATION CENTER

ROOM 2222

Wade Warman

Dayon Royster

VERSION 1.0

2/11/2021

CONTENTS

OVERVIEW...........................................................................1

HEALTH & SAFETY INFO......................................................2

HAZARD CONTROL MEASURES/REQUIRED PPE...............3

FIRST AID PROCEDURES.....................................................4

WASTE DISPOSAL...............................................................5

SPILL/CLEAN UP PROCEEDURES.......................................6

OPERATIONS GUIDE...........................................................7

APPENDIX: FRONT PANEL FUNCTION OVERVIEW .........37

OVERVIEW

The purpose of this document is to provide standard operating

procedures for the use of the Rigol DS4024 Oscilloscope in room

2222 of the Student Innovation Center.

Prior to engaging in hands-on training and operation, these re-

quired training modules MUST be completed:

• Shop Safety Fundamentals

• Fire Safety and Fire Extinguisher Training

• Hazard Communication Training (aka Worker Right to Know)

• Portable Power Tool Safety

Chemical Vapors: Heating of solder can generate toxic vapors

and vapors with high volatile organic compounds (VOCs).

Hot Surfaces: Circuits and soldering equipment generate heat.

Such surfaces must be guarded and labeling must warn users of

the hazards.

Mechanical Hazards: Moving parts must be guarded to prevent

accidental contact. Guards must never be bypassed.

Electrical: Contact with energized parts can lead to injury or

even death. Before each use, inspect for any damaged wiring

and safeguards. Do not use if problems are found. Ensure the

oscilloscope is properly grounded and plugged directly into an

outlet.

HEALTH & SAFETY INFO

REQUIRED PPE:

• Safety glasses

• Closed toed shoes

Hazard Control Measures:

• Always use the grounding strap when operating equipment

• No food/drink

• Electric shock can be dangerous and possibly deadly! If you

are unfamiliar with the electricity requirements of your project,

ask a shop staff for assistance

HAZARD CONTROL MEASURES

AND REQUIRED PPE

FIRST AID PROCEDURES

BURNS: Minor burns are typically small, red, have swelling, and

can blister. Cool burns with cold water and continue until the

pain lessens. After cooling, cover with a dry, sterile bandage or

clean dressing. Consult a physician as needed.

CUTS/SCRAPES: Minor cuts and scrapes usually stop bleeding

on their own. If needed, apply gentle pressure with a clean

bandage or cloth and elevate the wound until bleeding stops.

Clean the wound and apply bandages. Consult a physician as

needed.

PINCH/CRUSH: Consult a physician as needed.

INHALATION: Ensure there is proper ventilation prior to use. If

needed, stop the procedure and move to a well ventilated

area. Consult a physician as needed.

EYES: Immediately irrigate the eyes at an eyewash station for at

least 15 minutes. Hold the eyelids away from the eyeball, mov-

ing eye in all directions to wash thoroughly behind the eyelids.

Consult a physician as needed.

All accidents and injuries occurring at work or in the course of

employment must be reported to the employee’s supervisor as

soon as possible (even if no medical attention is required).

http://www.ehs.iastate.edu/occupational/accidents-injuries

WASTE DISPOSAL

If you have left over parts/materials that are stil useable, you

may donate them to the shop for other users.

Dispose of any un-usable left over wires, components, solder

drips, etc. into the waste bin.

SPILL/CLEAN UP PROCEDURES

If using solder, do not touch solder drips for 30 seconds to allow

solder to cool. After 30 seconds, wipe off surface(s) and dispose

of in the waste bins.

OPERATIONS GUIDE

PLEASE NOTE: This guide is meant to cover the basic operations

of creating measurements using the oscilloscope.

For a more detailed description of the front panel features,

please refer to the Appendix.

Additionally, there are many features and fuctions available

that are beyond the scope of this guide and it is recommended

to read the manufacturers manual for a full detailed description

of all features, functions, and operations.

If you need help, please ask the shop staff!

1. Turn on the power to the oscilloscope and wait for it to ini-

tialize

Table des matières

Autres manuels Rigol Équipement de test

Rigol

Rigol DS1074B Manuel utilisateur

Rigol

Rigol MSQ7054 Manuel utilisateur

Rigol

Rigol DHO800 Series Manuel utilisateur

Rigol

Rigol HDO4000 Series Manuel utilisateur

Rigol

Rigol DHO1000 Series Manuel utilisateur

Rigol

Rigol DS1000D series Manuel utilisateur

Rigol

Rigol DS1074B Manuel utilisateur

Rigol

Rigol DS1000Z-E Series Manuel d'installation et d'exploitation

Rigol

Rigol HDO1000 Series Manuel utilisateur

Rigol

Rigol MSO2000A Series Manuel utilisateur

Rigol

Rigol DS8000-R Series Manuel utilisateur

Rigol

Rigol DS6000 Series Manuel utilisateur

Rigol

Rigol DHO1000 Series Manuel utilisateur

Rigol

Rigol MSO1000Z series Mode d'emploi

Rigol

Rigol DHO4000 Series Manuel d'installation et d'exploitation

Rigol

Rigol MSO5152-E Manuel utilisateur

Rigol

Rigol MSO5072 Manuel utilisateur

Rigol

Rigol DHO900 Manuel utilisateur

Rigol

Rigol RP1018H Manuel utilisateur

Rigol

Rigol DS1102/4B Manuel utilisateur

Rigol

Rigol DL3000 Series Manuel utilisateur

Rigol

Rigol MSO2000A Series Manuel utilisateur

Rigol

Rigol DS4000 Series Manuel utilisateur

Rigol

Rigol RP7080S Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur