Rigol DS2000 Series Manuel utilisateur

RIGOL

Service Guide

DS2000 Series Digital Oscilloscope

Feb. 2014

RIGOL Technologies, Inc.

RIGOL

DS2000 Service Guide

Guaranty and Declaration

Trademark Information

RIGOL is a registered trademark of RIGOL Technologies, Inc.

Publication Number

SGA13101-1110

Notices

RIGOL products are protected by patent law in and outside of P.R.C.

RIGOL reserves the right to modify or change parts of or all the specifications

and pricing policies at company’s sole decision.

Information in this publication replaces all previously corresponding material.

RIGOL shall not be liable for losses caused by either incidental or consequential

in connection with the furnishing, use or performance of this manual as well as

any information contained.

Any part of this document is forbidden to be copied or photocopied or rearranged

without prior written approval of RIGOL.

Product Certification

RIGOL guarantees this product conforms to the national and industrial standards in

China as well as the ISO9001:2008 standard and the ISO14001:2004 standard. Other

international standard conformance certification is in progress.

If you have any problem or requirement when using our products or this manual,

please contact RIGOL.

E-mail: service@rigol.com

Website: www.rigol.com

RIGOL

DS2000 Service Guide

Safety Requirement

General Safety Summary

Please review the following safety precautions carefully before putting the instrument

into operation so as to avoid any personal injuries or damages to the instrument and

any product connected to it. To prevent potential hazards, please use the instrument

only specified by this manual.

Use Proper Power Cord.

Only the power cord designed for the instrument and authorized by local country

could be used.

Ground The Instrument.

The instrument is grounded through the Protective Earth lead of the power cord. To

avoid electric shock, it is essential to connect the earth terminal of power cord to the

Protective Earth terminal before any inputs or outputs.

Connect the Probe Correctly.

Do not connect the ground lead to high voltage since it has the isobaric electric

potential as ground.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and markers on the instrument and

check your manual for more information about ratings before connecting.

Use Proper Overvoltage Protection.

Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the

product, or else the operator might expose to danger of electrical shock.

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Use Proper Fuse.

Please use the specified fuses.

Avoid Circuit or Wire Exposure.

Do not touch exposed junctions and components when the unit is powered.

Do Not Operate With Suspected Failures.

If you suspect damage occurs to the instrument, have it inspected by qualified service

personnel before further operations. Any maintenance, adjustment or replacement

especially to circuits or accessories must be performed by RIGOL authorized

personnel.

RIGOL

DS2000 Service Guide

III

Keep Well Ventilation.

Inadequate ventilation may cause increasing of temperature or damages to the device.

So please keep well ventilated and inspect the intake and fan regularly.

Do Not Operate in Wet Conditions.

In order to avoid short circuiting to the interior of the device or electric shock, please

do not operate in a humid environment.

Do Not Operate in an Explosive Atmosphere.

In order to avoid damages to the device or personal injuries, it is important to operate

the device away from an explosive atmosphere.

Keep Product Surfaces Clean and Dry.

To avoid the influence of dust and/or moisture in air, please keep the surface of device

clean and dry.

Electrostatic Prevention.

Operate in an electrostatic discharge protective area environment to avoid damages

induced by static discharges. Always ground both the internal and external conductors

of the cable to release static before connecting.

Handling Safety

Please handle with care during transportation to avoid damages to buttons, knob

interfaces and other parts on the panels.

RIGOL

DS2000 Service Guide

Safety Terms and Symbols

Terms in this Manual. These terms may appear in this manual:

WARNING

Warning statements indica

te the conditions or practices that could result in

injury or loss of life.

CAUTION

Caution statements indicate the conditions or practices that could result in

damage to this product or other property.

Terms on the Product. These terms may appear on the Product:

DANGER

indicates an injury or hazard may immediately happen.

WARNING

indicates an injury or hazard may be accessible potentially.

CAUTION

indicates a potential damage to the instrument or other property might

occur.

Symbols on the Product. These symbols may appear on the product:

Hazardous

Voltage

Please Refer to

Manuals

Protective

Earth

Terminal

Chassis

Ground

Test

Ground

RIGOL

DS2000 Service Guide

DS2000 Series Overview

DS2000 is a high-performance and low bandwidth digital oscilloscope developed on

the basis of the Ultra Vision technique. DS2000, featuring rather deep memory depth,

ultra-wide dynamic range, superb waveform capture rate and all-round trigger

functions as well as hardware waveform record function and good display effect, is an

invaluable debug instrument in various fields (such as communication, cosmonautics,

national defense, embedded system, computer, research and education) and is the

one with the most complete functions and most outstanding specification among the

digital oscilloscopes with lower than 200 MHz bandwidth.

Main features:

200 MHz, 100 MHz and 70 MHz bandwidth.

Ultra Vision technique.

2 GSa/s maximum real-time sample rate.

50,000 wfms/s (dots display) waveform capture rate.

Real-time hardware waveform recording, waveform playback, record open

(constant on) and waveform analysis functions. Up to 65,000 frames of waveform

can be recorded.

56 Mpts maximum memory depth (option) and 14 Mpts standard memory depth.

256 degree gray scale display.

Low noise, 500 μV/div to 10 V/div ultra-wide vertical dynamic range.

8.0 inches, WVGA (800*480) 160,000 color TFT LCD, with ultra-wide screen, vivid

picture, low power consumption and long service life.

Adjustable brightness of analog channel waveform.

Auto setting of waveform display (AUTO).

16 kinds of trigger functions including multiple protocol triggers.

Standard parallel decoding and multiple serial decoding options.

Auto measurements of 24 waveform parameters and measurement functions

with statistic.

Precise delayed sweep function.

Built-in FFT function.

Pass/Fail test function.

Multiple waveform math operation functions.

Standard configuration interfaces: USB Device, USB Host, LAN and GPIB

(optional).

Support USB storage device and PictBrige printer.

Conform to LXI-C instrument standards. Enable quick, economic and efficient

creation and reconfiguration of test system.

Support remote command control.

Embedded help enables easier information access.

Support multiple languages and Chinese/English input.

Novel and delicate industrial design and easier operation.

RIGOL

DS2000 Service Guide

Contents

Guaranty and Declaration .............................................................................I

Safety Requirement..................................................................................... II

General Safety Summary............................................................................II

Safety Terms and Symbols......................................................................... IV

DS2000 Series Overview.............................................................................. V

Chapter 1 Disassemble and Assemble....................................................1-1

Disassemble and Assemble Notices............................................................1-1

Outside View Drawing of the Instrument....................................................1-2

Disassemble the Rear Cover......................................................................1-3

Disassemble the Rear Metal Cover.............................................................1-4

Disassemble the Fan................................................................................1-5

Disassemble the Power Module .................................................................1-6

Disassemble the Front Panel and Knobs.....................................................1-7

Disassemble the Keyboard........................................................................1-8

Disassemble the LCD................................................................................1-9

Disassemble the Top Keys.......................................................................1-10

Disassemble the Main Board...................................................................1-11

Assemble Procedures .............................................................................1-12

Chapter 2 Troubleshooting&Maintenance..............................................2-1

Troubleshooting.......................................................................................2-1

Maintenance............................................................................................2-3

System Maintenance..........................................................................2-3

Warranty..........................................................................................2-3

General Care and Cleaning.................................................................2-4

Chapter 1 Disassemble and Assemble RIGOL

DS2000 Service Guide

1-1

Chapter 1 Disassemble and Assemble

Disassemble and Assemble Notices

Notices:

Do not disassemble the instrument unless for working requirement.

Only authorized personnel can disassemble the instrument.

Cut off the power supply before disassembling the instrument.

Please wear anti-static wrist strap or make other anti-static precaution when

disassembling the instrument.

Please use proper tools and follow the correct steps.

Take care not to deform the metal structure and be scuffed when disassembling

the metal structures.

Tools Required:

Phillips screw driver T10

BNC socket

5mm hexagonal socket

WARNING

Make sure that the power supply is cut off before disassembling the

instrument. Only personnel with relative training or relative qualification

certification can disassemble the instrument.

RIGOL Chapter 1 Disassemble and Assemble

1-2

DS2000 Service Guide

Outside View Drawing of the Instrument

The figure below is the outside view drawing of DS2000. You need to get a basic

understanding of the main parts of the instrument before disassembling and

assembling the instrument. When disassembling or assembling the instrument, please

follow the procedures and take care not to scratch the surfaces of the parts.

The recommended disassemble procedures are as follows.

Disassemble the Rear Cover → Disassemble the Rear Metal Cover

→Disassemble the Fan →Disassemble the Power Module→Disassemble the

Front Panel and Knobs →Disassemble the Keyboard → Disassemble the

LCD →Disassemble the Top Keys→ Disassemble the Main Board

Figure 1-1 DS2000 Outside View Drawing

Autres manuels pour DS2000 Series

Table des matières

Autres manuels Rigol Équipement de test

Rigol

Rigol DS1000CA series Manuel utilisateur

Rigol

Rigol MSO4000 Series Manuel utilisateur

Rigol

Rigol DS1000Z Series Manuel utilisateur

Rigol

Rigol DHO900 Manuel utilisateur

Rigol

Rigol DS2000E Series Manuel utilisateur

Rigol

Rigol MSO1000Z series Manuel utilisateur

Rigol

Rigol DS1074B Manuel utilisateur

Rigol

Rigol DS1302CA Manuel utilisateur

Rigol

Rigol DS1000Z Series Manuel utilisateur

Rigol

Rigol MSO4000 Series Manuel utilisateur

Rigol

Rigol DS6000 Series Manuel utilisateur

Rigol

Rigol DS2000E Series Mode d'emploi

Rigol

Rigol DG2052 Manuel utilisateur

Rigol

Rigol DG800 Pro Series Mode d'emploi

Rigol

Rigol RP5600A Manuel utilisateur

Rigol

Rigol DS4024E Manuel utilisateur

Rigol

Rigol DS6000 Series Manuel utilisateur

Rigol

Rigol DS1102E Manuel utilisateur

Rigol

Rigol HDO1000 Series Manuel utilisateur

Rigol

Rigol DS4000E Series Mode d'emploi

Rigol

Rigol MSO2000A Series Mode d'emploi

Rigol

Rigol DHO4000 Series Manuel d'installation et d'exploitation

Rigol

Rigol DS1102E Manuel utilisateur

Rigol

Rigol DHO924 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur