Rigol DS1000 Series Mode d'emploi
Programming Guide RIGOL
Publication Number: PGA02100-1210
June, 2008
DS1000, DS1000CA Series Digital Oscilloscope
DS1000CD, DS1000C, DS1000MD, DS1000M
DS1302CA, DS1202CA, DS1102CA, DS1062CA
© 2008 RIGOL Technologies, Inc.
All Right Reserved
RIGOL
© 2008 RIGOL Technologies, Inc. I
Programming Guide for DS1000/DS1000CA Series
©2008 RIGOL Technologies, Inc. All Rights Reserved.
RIGOL products are protected by patent laws in and outside of the P.R. China.
Information in this publication replaces all previous corresponding material.
RIGOL Technologies, Inc. reserves the right to modify or change part of or all
the specifications and pricing policies at company‟s sole decision.
NOTE: RIGOL is registered trademark of RIGOL Technologies, Inc.
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
II
Content
Chapter 1 Programming Introduction................................................ 1-1
Communication Ports..............................................................................1-2
Symbol Instruction .................................................................................1-3
The Abbreviation of the Commands .........................................................1-4
Chapter 2 Set the Command Systems ................................................ 2-1
System Commands.................................................................................2-2
Keyboard Commands..............................................................................2-7
Measurement commands ......................................................................2-19
Acquire Commands ..............................................................................2-28
Display System Commands ...................................................................2-31
Vertical Commands...............................................................................2-37
Horizontal Commands........................................................................... 2-44
Trigger Commands ............................................................................... 2-48
Trigger control commands ......................................................................2-48
Trigger Mode Commands ........................................................................2-53
LA Commands (Only for DS1000*D Series）........................................... 2-77
Math Commands..................................................................................2-81
Waveform commands ...........................................................................2-83
Chapter 3 Command Quick Reference................................................ 3-1
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
1-1
Chapter 1 Programming Introduction
This book provides guidance to the remote control programming of the DS1000 and
DS1000CA series digital oscilloscopes.
It includes the necessary conceptual information, the command structure for the
subsystem and the case in the application. Users can carry on the remote control to
the oscilloscope or do the further development according to this manual.
NOTE: The Programming Reference is applicable to the Oscilloscope of
the firmware version above 01.02.18.
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
1-2
Communication Ports
Computers communicate with the oscilloscope by sending and receiving messages
over an I/O port, such as USB, GPIB port or a RS-232 port. Commands appear as
ASCII character strings embedded inside the output statements of a “host” language
available on your computer. The input commands of the host language are used to
read responses from the oscilloscope.
Basic operations that you can do with a computer and an oscilloscope include:
Set up the oscilloscope.
Make measurements.
Retrieve data (waveforms or measurements) from the oscilloscope.
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
1-3
Symbol Instruction
1. Command Separator :
Commands usually begin with a colon (:). Queries are formed by adding a question
mark (?) to the end of the commands. The return values of the queries are mostly
expressed in scientific count such as 2.64e+00.
2. Blank Space □
Blank space is used to separate the instruction from the program data. If the
instruction does not require any program data, blank space is not needed.
3. Braces { }
When several elements, separated by a vertical line (|) are enclosed by braces, { },
only one element may be selected. For example, {ON | OFF} indicates that only ON
or OFF may be selected, not both.
4. Square Brackets [ ]
Items enclosed in square brackets [ ] are optional.
5. Triangle Brackets < >
Items enclosed in < > should be replaced by a numericalvalue or character string.
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
1-4
The Abbreviation of the Commands
Some commands are too long to memory and spell. In order to reduce your work
and memory difficulty, we set the abbreviation of the commands.
The abbreviation rule is to omit all the small letters in the instruction header.
For example:
:TRIGger:ALTernation:SLOPe:LEVelA
can be entered as:
:TRIG:ALT:SLOP:LEVA
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-1
Chapter 2 Set the Command Systems
For remote control programming, DS1000 and DS1000CA Series oscilloscopes
have the following command groups:
System Commands
Keyboard Commands
Measurement Commands
Acquire Commands
Display Commands
Vertical Commands
Horizontal Commands
Trigger Commands
LA Commands（Only for DS1000*D Series）
Math Commands
Waveform Commands
RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-2
System Commands
System commands are the fundamental commands for the operation of an
oscilloscope. They can either be used as individual instructions or in conjunction with
other instructions to form a script.
System Commands include:
*IDN?
:RUN
:STOP
:AUTO
:FORCetrig
:Trig%50
:HARDcopy
:INFO:LANGuage
:COUNter:ENABle
:BEEP:ENABle
:BEEP:ACTion
We will give specific explanations for each command in the following part.
Autres manuels pour DS1000 Series
1
Ce manuel convient aux modèles suivants
9
Table des matières
Autres manuels Rigol Équipement de test
Rigol
Rigol DS2000 Series Manuel utilisateur
Rigol
Rigol DG900 Pro Series Manuel utilisateur
Rigol
Rigol MSO2000A Series Manuel utilisateur
Rigol
Rigol MSO4000 Series Manuel utilisateur
Rigol
Rigol MSO1000Z series Mode d'emploi
Rigol
Rigol DS1102E Manuel utilisateur
Rigol
Rigol RP1018H Manuel utilisateur
Rigol
Rigol DHO1000 Series Manuel utilisateur
Rigol
Rigol MSO4000 Series Manuel utilisateur
Rigol
Rigol MSO8000A Series Manuel utilisateur
Rigol
Rigol RP7000 Series Manuel utilisateur
Rigol
Rigol VS5000 Series Manuel utilisateur
Rigol
Rigol DS4000E Series Manuel utilisateur
Rigol
Rigol DS-5000 Series Manuel utilisateur
Rigol
Rigol MSO5000 Series Manuel utilisateur
Rigol
Rigol MSO1000Z series Manuel utilisateur
Rigol
Rigol DS8000-R Series Manuel utilisateur
Rigol
Rigol DS1302CA Manuel utilisateur
Rigol
Rigol MSO4000 Series Manuel utilisateur
Rigol
Rigol DS4000 Series Manuel utilisateur
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
