Riello VSD 1100 Mode d’emploi

INTRODUCTION

Congratulations on purchasing a UPS Vision Dual product and welcome to Riello UPS! To use the support service

offered by Riello UPS, visit the site www.riello-ups.com

Our Company is a specialist in the design, development and manufacturing of uninterruptible power supplies (UPS).

The UPS described in this manual is a high quality product which has been carefully designed and built in order to

guarantee the highest levels of performance.

This device can be installed by anyone on the condition that they have READ THIS INSTALLTION AND USER

MANUAL CAREFULLY.

The UPS and the Battery Box generate DANGEROUS internal electrical voltages. All maintenance operations

must be carried out by suitably qualified operators.

This manual contains detailed instructions for using and installing the UPS and any additional Battery boxes.

For information on how to use and maximise the performance of your device, please retain the CD containing

this manual and read it carefully before operating the equipment.

ENVIRONMENTAL PROTECTION

In the development of its products, the company devotes abundant resources to analysing the environmental aspects.

All our products pursue the objectives defined in the environmental management system developed by the company in

ompliance with applicable standards.c

o hazardous materials such as CFCs, HCFCs or asbestos are used in this product.N

When evaluating packaging, the choice of material has been made favouring recyclable materials.

For correct disposal, please separate and identify the type of material of which the packaging is made according to the

able below. Dispose of all material in compliance with applicable standards in the country in which the product is used.t

DESCRIPTION MATERIAL

Box Cardboard

Packaging corner Stratocell

Protective bag Polythene

Accessories bag Polythene

DISPOSING OF THE PRODUCT

The UPS and the Battery Box contain electronic PCBs and batteries which are considered TOXIC and HAZARDOUS

waste. When the product reaches the end of its operating life, dispose of it in accordance with applicable local legislation.

isposing of the product correctly contributes to respecting the environment and personal health.

notice.

The reproduction of any part of this manual, in whole or in part, is forbidden without the prior consent of the manufacturer.

In order

CONTENTS

PRESENTATION 5

UPS VIEWS 6

FRONT VIEW 6

REAR VIEW 7

DISPLAY PANEL VIEW 8

BATTERY BOX (ACCESSORY NOT SUPPLIED WITH THE UPS)9

REAR VIEW 9

INSTALLATION 10

INITIAL CONTENT CHECK 10

INSTALLATION ENVIRONMENT 11

BATTERY BOX INSTALLATION 11

SETTING THE NOMINAL BATTERY CAPACITY 11

TOWER VERSION 12

TOWER VERSION WITH BATTERY BOX 13

RACK VERSION 14

USE 15

CONNECTIONS AND SWITCHING ON FOR THE FIRST TIME 15

SWITCHING ON FROM THE MAINS 15

SWITCHING ON FROM THE BATTERY 15

SWITCHING OFF THE UPS 15

DISPLAY PANEL MESSAGES 16

UPS STATUS MESSAGES 16

MEASUREMENT DISPLAY AREA 17

CONFIGURING THE OPERATING MODE 18

POSSIBLE SETTINGS 18

ADDITIONAL FUNCTIONS 18

SOFTWARE 20

MONITORING AND CONTROL SOFTWARE 20

CONFIGURATION SOFTWARE 20

UPS CONFIGURATION 21

COMMUNICATION PORTS 22

RS232 CONNECTOR 22

COMMUNICATION SLOT 22

BATTERY PACK REPLACEMENT 23

TROUBLESHOOTING 25

ALARM CODES 27

FAULT 27

LOCK 28

TECHNICAL DATA 29

PRESENTATION

The VISION DUAL series is the ideal solution for high end users who require high security and versatility from their

power systems. The VISION DUAL is the best protection system available for network devices, servers and conventional

storage systems.

The VISION DUAL series is a range of UPS which utilises the very latest Line Interactive technology and sinusoidal

output voltage waveforms. This technology allows high efficiency and reduced energy consumption, whilst guaranteeing

a high level of protection against disturbances from the mains supply.

This family was designed with versatility in mind, allowing for installation in both tower and rack positions. The following

shows how the product can be installed in the two different positions:

The UPS is also equipped with a dedicated battery pack that allows for easy battery replacement (hot swap) in complete

safety thanks to the protected connection system.

It is possible to use one or more autonomy expansion units known as BATTERY BOXES (optional accessories) with the

same dimensions and aesthetic appearance as the UPS.

ER series models are fitted with upgraded battery charges for long runtime and business continuity applications. For

these versions, the batteries are housed in separate cabinets.

UPS VIEWS

FRONT VIEW

Extractable/rotatable display plate

Removable front panel

Release slits Battery pack connector

ON/OFF Switch Battery pack retention panel

REAR VIEW

Model 1100VA / 1500VA Model 2200VA / 3000VA

Communication port RS232

Battery expansion connector (optional)

USB communication port IEC 10A output socket

IEC 16A output socket IEC 16A input plug

Communication Card Slots IEC 10A input plug

Cooling fans Circuit breaker

Remote control terminal board

DISPLAY PANEL VIEW

“SEL” button (Select)

Load level indicator

“ON” button Configuration area

“STAND-BY” button Maintenance request

Regular operation Timer

Mains operation Measurement display area

Battery operation Stand-by / alarm

AVR active EnergyShare

Battery charge indicator

BATTERY BOX (ACCESSORY NOT SUPPLIED WITH THE UPS)

The BATTERY BOX is an optional accessory for this range of UPS (same dimensions and aesthetic appearance).

The BATTERY BOX contains batteries which allow the operating time of the uninterruptible power supplies to be

increased during extended blackouts. The number of batteries contained can vary according to the type of UPS for which

the BATTERY BOX is intended. It is therefore necessary to take great care to ensure that the battery voltage of the

BATTERY BOX is the same as the voltage permitted by the UPS.

everal battery boxes can be connected in series to achieve a longer extended runtime.S

f the UPS is connected to a battery box, the maximum active power is derated from PF 0,9 to PF 0,8.I

REAR VIEW

Front view

Rear viewFront view

(without panel)

Extractable/ rotatable battery box plate Battery isolator

Removable front panel Battery expansion connector

INSTALLATION

NITIAL CONTENT CHECK

After opening the packaging

he package must contain: , it is first necessary to check the contents.

UPS Support feet

Schuko power cable - IEC 10A

(IEC 16A only for models 2200/3000VA) 2 IEC 10A connection cables

USB cable RS232 cable User manual CD + Safety manual

Handles for rack installation Handle screws

Battery expansion plug

(ER version only) IEC 16A male plug

(For 2200/3000VA models only)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Riello UPS

Riello

Riello Sentinel Dual SDH 2200 ER Manuel utilisateur

Riello

Riello SENTINEL PRO Manuel utilisateur

Riello

Riello SEP700 Manuel utilisateur

Riello

Riello GUARD TOWER GTT 6000 Manuel utilisateur

Riello

Riello multipower MPW Series Manuel utilisateur

Riello

Riello SDH 1000 UL Instructions de montage

Riello

Riello Dialog Plus Manuel utilisateur

Riello

Riello MULTI SENTRY Series Manuel utilisateur

Riello

Riello MST 30 Mode d’emploi

Riello

Riello VST 2000 Mode d’emploi

Riello

Riello 100 kVA Manuel utilisateur

Riello

Riello WinDialog 40U Plus Manuel utilisateur

Riello

Riello MULTI SENTRY MST 60 Manuel utilisateur

Riello

Riello Sentinel Dual SDH 1000 Mode d’emploi

Riello

Riello MCM 10 Mode d’emploi

Riello

Riello NEtDialog NDG 800 Manuel utilisateur

Riello

Riello iPlug 600 VA Manuel utilisateur

Riello

Riello MCT 10 Mode d’emploi

Riello

Riello SENTINEL RACK SER 1500 Mode d’emploi

Riello

Riello 700VA Manuel utilisateur

Riello

Riello Dialog Plus DLP series Manuel utilisateur

Riello

Riello 5KVA Mode d’emploi

Riello

Riello Sentinel Dual SDL 3300 Mode d’emploi

Riello

Riello Dialog Vision 500-3000 ?? Mode d’emploi

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur