Ricoh Fi-8040 Manuel d'utilisation et d'entretien

Daily Care

Materials

●

CAUTION

Name

Part No.

Notes

Cleaner F1

PA03950-0352

100 ml

Liquid cleaner to use for removing dirt and stains

Cleaning Paper

CA99501-0012

10 sheets

Used to clean the inside of the scanner with ease.

Spray it with Cleaner F1 and scan it with the scanner in

the same way as a document.

Cleaning Wipe

PA03950-0419

24 packets

Pre-moistened with Cleaner F1. It can be used instead of

moistening a cloth with Cleaner F1.

Cotton swab

Commercially

available

Used to clean a tiny part such as the ultrasonic sensor.

Dry cloth

Used to wipe off dirt and stains. Moisten it with Cleaner

F1 for cleaning.

For more information about the cleaning materials, contact the distributor/dealer where you purchased this

product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact

information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and

then make an inquiry.

Location

Frequency

Inside of the scanner (ADF)

Brake roller

Every 3,000 sheets

Pick roller

Rubber idler roller

Plastic idler roller

Glass

Ultrasonic sensor

Feed roller

Eject roller

Outside of the scanner

Scanner

Clean when dust and dirt are noticeable.

Touch screen

The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of sheets

scanned. The scanner records the number of sheets scanned so that you can check the number of

sheets scanned after you cleaned it last.

Use one of the following methods to check the number of sheets that have been scanned.

• The procedure when using the touch screen is as follows.

[Cleaning & Maintenance] -»[Consumable counters].

2 On the [Consumable counters] screen, check the value for [After cleaning],

- When the background color of the counter is yellow

It is about time to clean the scanner.

- When the background color of the counter is red

It is time to clean the scanner. Clean the scanner.

1 On the touch screen, press

•

The scanner including the ADF paper chute (feeder) and the stacker should be cleaned with either a piece of dry

cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe.

•Touch screen

To avoid the surface of the touch screen becoming dirty, clean it regularly by gently wiping

dirt and dust off with a soft, dry cloth.

Clean the touch screen with care. Do not rub or tap the surface with hard objects as doing so

may damage the surface.

•

The inside of the ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.

As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may cause

problems related to scanning or affect the scanned results. Cleaning should be performed approximately every

5,000 sheets scanned. Note that this guideline varies depending on the types of documents you scan. For

instance, it may be necessary to clean the scanner more frequently when you scan documents on which the toner

is not sufficiently fused.

1 Turn on the scanner.

On the touch screen, press

[Cleaning & Maintenance] —> [Cleaning] —>■ [Cleaning Paper].

3 Spray the Cleaning Paper with Cleaner F1.

4 Pull out the chute extensions according to the length of the Cleaning Paper.

5 Adjust the stacker according to the length of the Cleaning Paper.

6 Load the Cleaning Paper in the ADF paper chute (feeder).

7 Adjust the side guides to the width of the Cleaning Paper.

Move the side guides so that there is no space between the side guides and the Cleaning

Paper.

Otherwise, the Cleaning Paper may be fed skewed.

8 On the touch screen, press the [Start] button on the [Cleaning Paper] screen.

The Cleaning Paper is fed and ejected onto the stacker.

9 Use one of the following methods to clear the cleaning counter.

•The procedure when using the touch screen is as follows.

a On the touch screen, press

—> [Cleaning & Maintenance] —> [Consumable

counters].

b On the [Consumable counters] screen, press the [Clear] button for [After cleaning].

•

The inside of the ADF can be cleaned with a piece of cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe.

As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may cause

problems related to scanning or affect the scanned results. Cleaning should be performed approximately every 3,000

sheets scanned. Note that this guideline varies depending on the types of documents you scan. For instance, it may

be necessary to clean the scanner more frequently when you scan documents on which the toner is not sufficiently

fused.

1. Turn off the scanner, unplug the power cable and wait for at least 15 minutes.

2. Open the ADF.

3. Clean the following locations with a cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe.

No.

Location

Brake roller (x 2)

Ultrasonic sensor (x 2)

No.

Location

Rubber idler roller (x 2)

Plastic idler roller (x 2)

Glass (x 2)

Pick roller (x 2)

Feed roller (x 2)

Eject roller (x 2)

1 Brake roller (x 2)

Remove the brake roller from the scanner.

Gently wipe off any dirt or dust along the grooves, taking care not to damage the roller

surface.

2 Ultrasonic sensor (x 2)

Gently wipe the dirt and dust off the surface of the ultrasonic sensors.

3Rubber idler roller (x 2)

4 Plastic idler roller (x 2)

Gently wipe off any dirt or dust along the grooves as you rotate the roller manually,

taking care not to damage the roller surface. Make sure that it is wiped properly

because black residue on the rollers will affect the feeding performance.

5 Glass (x 2)

Gently wipe dirt and dust off the glass sections

•

Autres manuels pour fi-8040

Table des matières

Autres manuels Ricoh Scanner

Ricoh

Ricoh Aficio IS420 Manuel utilisateur

Ricoh

Ricoh IS100 Manuel utilisateur

Ricoh

Ricoh Scanner Manuel utilisateur

Ricoh

Ricoh Wide Format Color Scanner Manuel utilisateur

Ricoh

Ricoh Printer Manuel utilisateur

Ricoh

Ricoh IS200e Manuel utilisateur

Ricoh

Ricoh IS430 Manuel utilisateur

Ricoh

Ricoh Priport JP1010 Manuel utilisateur

Ricoh

Ricoh Priport JP1030 Manuel utilisateur

Ricoh

Ricoh IS01 - IS 01 Manuel utilisateur

Ricoh

Ricoh fi-70F Manuel utilisateur

Ricoh

Ricoh IS330DC - IS - Flatbed Scanner Manuel utilisateur

Ricoh

Ricoh IS300e Manuel utilisateur

Ricoh

Ricoh IS760 Manuel utilisateur

Ricoh

Ricoh HS2P PLUS Manuel utilisateur

Ricoh

Ricoh Capella-NB1e Manuel utilisateur

Ricoh

Ricoh Scanner Manuel utilisateur

Ricoh

Ricoh IS450DE Manuel utilisateur

Ricoh

Ricoh IS330DC - IS - Flatbed Scanner Manuel utilisateur

Ricoh

Ricoh fi-8040 Manuel

Ricoh

Ricoh 4800WD Manuel utilisateur

Ricoh

Ricoh IS01 Manuel utilisateur

Ricoh

Ricoh Aficio 2105 Manuel utilisateur

Ricoh

Ricoh IS200e Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Ricoh fi-8040 Manuel d'utilisation et d'entretien

Manuels Scanner populaires d'autres marques