Ricoh Ri 2000 Manuel utilisateur

Autres manuels pour Ri 2000

5

Table des matières

Autres manuels Ricoh Imprimante

Ricoh

Ricoh Aficio SG 3110DN Manuel utilisateur

Ricoh

Ricoh SP C250SF Manuel utilisateur

Ricoh

Ricoh SP 4520 DN Manuel utilisateur

Ricoh

Ricoh OR-C1 Guide de démarrage rapide

Ricoh

Ricoh SH-P1 M020 Guide de démarrage rapide

Ricoh

Ricoh Pro C9200 Instructions de montage

Ricoh

Ricoh P C301W Manuel utilisateur

Ricoh

Ricoh Ri 2000 Manuel utilisateur

Ricoh

Ricoh SP 150w Manuel d'instructions

Ricoh

Ricoh AP1400 Manuel utilisateur

Ricoh

Ricoh InfoPrint 1764 Manuel utilisateur

Ricoh

Ricoh Aficio SP 3300DN Manuel utilisateur

Ricoh

Ricoh 2045 - Type Print Server Guide rapide

Ricoh

Ricoh SP221s Manuel utilisateur

Ricoh

Ricoh C210SF - Aficio SP Color Laser Instructions d'installation

Ricoh

Ricoh IM CW2200 Manuel utilisateur

Ricoh

Ricoh SP 100 e Manuel utilisateur

Ricoh

Ricoh BP20 - Aficio B/W Laser Printer Manuel utilisateur

Ricoh

Ricoh Pro L5130e Manuel de service

Ricoh

Ricoh AP305 Manuel utilisateur

Ricoh

Ricoh Ri 100 Manuel utilisateur

Ricoh

Ricoh Ri 100 Manuel utilisateur

Ricoh

Ricoh Aficio 2105 Manuel utilisateur

Ricoh

Ricoh Aficio AP4510 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

RICOHRi 2000

Flushingwhite

channels, 4 color

only mode

Version 1.0

Date 04/12/23

© Copyright Ricoh DTG 2023 All rights reserved

1

Introduction

This is necessary to keep the printer in optimal condition and avoid

potential damage that can be easily prevented. These instructions will

guide you on how to temporarily flush the white ink channels with

cleaning solution to use the printer in 4-color mode.

Scope

This applies to RICOH Ri2000 printer.

Purpose

•Bad Nozzle checks –Refer to this document

•https://19965518.fs1.hubspotusercontent-

na1.net/hubfs/19965518/Technical%20docs/Ri2000%20Print%20

head%20recovery%20guide%20(1).pdf

•Printing CMYK or 4 color mode with cleaner in white channels

Required Supplies

•Cleaning cartridges for all white channels (must be 100% full)

Contact Ricoh Support team

https://ricohdtg.com/contact-us/

Email: tech1@ricohdtg.com or Phone: (877) 626 2538, Ext. 2

2

Step 1. Check firmware version on printer. Update firmware on

printer to version 1.31 or newer if older version installed. See

firmware update guide for instructions.

Step 2. Clean the Maintenance Station, remove the white ink

cartridges.

Step 3. Insert cleaning cartridges into white ink slots

Step 4. Press the Settings tab.

Step 5. Press [INK PATH CONTROL]

3

Step 6. Press [CLEANER CHARGING]

Step 7. Select [White].

Step 8. Confirm by pressing [YES] to charge the system with cleaning

solution. Note: The first charge is considered a light charge . Leave

the cleaning cartridges in and do not turn off the printer. The printer

will be doing essential auto cleans with the cleaning carts to prevent

nozzle clogging.

If you want to turn the printer off, you must run the white cleaner

charging again. This would be required In order to properly flush

the printer for storage and wet cap the white carriage while the

printer is off.

4

Step 9. Now that the white ink lines are charged with

cleaner, utilizing the latest firmware update you are now able to do

head cleans and nozzle checks with cleaner installed in the printer.

This could be used to clear blocked nozzles or when the white ink is

not being used in 4 color print mode.

Refer to this instruction for nozzle recovery.

https://19965518.fs1.hubspotusercontent-

na1.net/hubfs/19965518/Technical%20docs/Ri2000%20Print%20he

ad%20recovery%20guide%20(1).pdf