Ricoh MD-A1b Manuel de service

Technical Bulletin PAGE: 1/5

Reissued:2-Jul-13

Model: MD-A1b(P3000) Date: 06-Mar-12 No.: RE0A0001g

RTB Reissue

The items in bold italics were corrected or added.

This RTB has been issued to announce the firmware release information for the MD-A1b

Version Effective Date File size Note

3.0.1 August 10th, 2013

Around 22:00

(JST/GMT+9) See below*** -Forced update*

-See below***

2.3.1

April 17th, 2013

Around 12:00

(JST/GMT+9)

After Server maintenance

93MB -Optional

update**

2.2.1

Jan 23rd, 2013

Around 12:00

(JST/GMT+9)

After Server maintenance

69MB(2.2.1) -Optional

update**

2.1.1

Dec 9th, 2012

Around 02:00 (Dec 8th, around

26:00)

(JST/GMT+9)

After Server maintenance

74MB (2.1.1) -Optional

update**

2.0.2

2.0.3

Sep 23rd, 2012

Around 00:00 (Sep 22nd,

Around 24:00)

(JST/GMT+9)

After Server maintenance

7MB(2.0.2)

111MB(2.0.3)

-Forced update*

-2 times version

up at one time

1.3.1 June 24th, 2012

Around 18:00(JST)

After Server maintenance Approx. 34MB Forced update*

1.2.2 March 7th, 2012

Around 11:00 (JST) 0.4MB

1.2.1 January 30th, 2012

around 20:00 (JST) 40MB -

1.1.2 1st Mass production - -

Note: The time required to complete the download is approximately 20 minutes in the case of a

500kbps connection. The exact amount of time will depend mainly on the customer’s network

environment (bandwidth, configuration, etc.).

Subject: Firmware Release Note: MD-A1b Prepared by: S. Ishizu

From: 2nd Tech Service Sect., MFP/Printer Tech Service Dept.

Classification: Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other (Firmware) Tier 2

Technical Bulletin PAGE: 2/5

Reissued:2-Jul-13

Model: MD-A1b(P3000) Date: 06-Mar-12 No.: RE0A0001g

*: Forced Update

A Forced Update means that any device that connects to the server after the “Effective

Date” shown above must update to the latest “Forced Update” version before holding

a videoconference. All older firmware versions become obsolete, and cannot be used

to hold videoconferences.

**: Optional Update

An Optional Update means that it is not required to install the version shown. Devices

that connect to the server after the “Effective Date” will have the option to update to

the latest version before holding a video conference.

Devices that use different firmware versions can hold teleconferences with each other,

as long as they have already updated to the most recent Forced Update version. (e.g.,

v2.1.1 is compatible with v2.0.3, but not with v1.3.1).

***: Special update method for Ver. 3.0.1

Users who already using Ver2.1.1, Ver2.2.1, and Ver2.3.1 can update directly

to Ver3.0.1.

Users who are using versions older than this must update to Ver2.0.4 first

(the usual method), and then update to Ver3.0.1

User’s

version

before

updating to

Ver3.0.1

Total file size of

Ver.3.0.1 IMPORTANT:

2.3.1 53MB

2.2.1 70MB

2.1.1 71MB

Update directly to Ver. 3.0.1

2.0.2

2.0.3 72MB Update to V2.0.4, and then from this version,

update directly to Ver3.0.1.

1.3.1 Total 79MB

(7MB + 72MB)

Update one version at a time until V2.0.4 (i.e. 3

updates), and then from this version, update

directly to Ver3.0.1.

1.2.2 Total 113MB

(41MB + 72MB)

Update one version at a time until V2.0.4 (i.e. 4

updates), and then from this version, update

directly to Ver3.0.1.

1.2.1 Total 113.4MB

(41.4MB + 72MB)

Update one version at a time until V2.0.4 (i.e. 5

updates), and then from this version, update

directly to Ver3.0.1.

1.1.2 Total 153.4MB

(81.4MB + 72MB) Update one version at a time until V2.0.4 (i.e. 6

updates), and then from this version, update

directly to Ver3.0.1.

Technical Bulletin PAGE: 3/5

Reissued:2-Jul-13

Model: MD-A1b(P3000) Date: 06-Mar-12 No.: RE0A0001g

Version Modified Points or Symptom Corrected

3.0.1

Additional functions:

- Display Contact names during a meeting

You can choose whether to display the contact names during a meeting

When you use this feature, your Contact names are displayed in the

screens of all meeting participants.

- Limited bandwidth

To accommodate the needs of your network environment, you can

reduce the network bandwidth used during a meeting. From this

version, the maximum level of bandwidth for DOWN (receive) is less

than 300 kbps.

- PC Document Share

The following features can be enabled and disabled while the screen is

being shared:

Full Screen: Displays the entire screen.

Active Window: Displays only the window selected.

- Increased capacity of Contacts list

The Contacts list can now hold up to 200 entries.

2.3.1

Additional functions:

- Contact List sorting

The Contact List can be sorted by "Status" or "Name".

- Port Setting (Communication with port of TCP443)

If the UDP port cannot be used for communication due to problems with the

network environment you are using, you can use the TCP port (443)

instead.

*: This feature does not work when connecting to a proxy server.

- Software keyboard

The keyboard can be moved along the horizontal axis (L/R) with respect

the screen.

- Improved log upload

The size of the following log files was increased five-fold.

- network_status.log

- videoClient.log

Symptom corrected:

- Volume level is displayed in linear form while being adjusted.

2.2.1

Additional functions:

- Bandwidth Settings

This feature was added to the Menu list as “Video Meeting Detailed

Config”, and allows you to limit the network bandwidth used during a

meeting. To accommodate the needs of your network environment,

you can reduce the network bandwidth used during a meeting. When

limiting the network bandwidth, the maximum level of bandwidth for

UP (send) is less than 300 kbps.

Technical Bulletin PAGE: 4/5

Reissued:2-Jul-13

Model: MD-A1b(P3000) Date: 06-Mar-12 No.: RE0A0001g

2.1.1

Additional functions:

- Video Connection Check

This feature was added to the Menu list as “Connection Check”, and

allows the user to do a connection check without having to use any

other device. Only the video connection is checked; audio is not

checked.

- Multi-point private meeting (PIN code)

Multiple contacts can participate in a private meeting, and users can

connect to the meeting by selecting the contact from the Contact List.

Note:

- This change is a functional upgrade of the feature introduced in

v2.0.3 for connecting to private meetings.

- The meeting code must be shared along all planned participants in

advance.

- If a meeting participant is still using v2.0.3, the private meeting can

only be held peer-to-peer.

- Speaker volume level indicator

The volume level is displayed as the user adjusts the volume, and the

mute icon is displayed while the microphone is on mute.

Note: This feature does not work when an external

microphone/speaker unit is used.

- Immediate detection/activation of external microphone

An external microphone can be connected and activated immediately

while a videoconference is in progress.

Note: Previously, the user had to connect the microphone before starting a

conference, or stop the conference in progress.

Symptom corrected:

- Cannot configure network settings for SSID search.

2.0.2

2.0.3 Additional functions:

- New user interface.

- Supports Private Meetings, which allows two users to hold a one-on-one

conference.

- Supports the Checking the News feature, which allows users to receive the

latest notifications on firmware updates and maintenance, and other

important information.

Other:

- Improved network configuration.

Five profiles can be saved for each network (wired and wireless).

User can switch wired and wireless network without reboot.

- Changed to the QWERTY keyboard.

Note: For more details on this change, refer the user manuals.

Technical Bulletin PAGE: 5/5

Reissued:2-Jul-13

Model: MD-A1b(P3000) Date: 06-Mar-12 No.: RE0A0001g

1.3.1 Symptom corrected:

Several minor bugs were fixed.

Additional functions:

Supports connection to newly established Data Center (North America).

1.2.2 Symptom Corrected:

- A DNS time-out occurs (improvement)

- The volume is lowered when the external microphone speaker is used

-Cursor indicator disappear when initial set-up

Note: See RTB#RE0A0002

Additional functions:

- A feature was added that automatically resumes a failed firmware update

from the point at which it failed (not from the beginning).

Note: See RTB# RE0A0003.

1.2.1 Additional function

- Bandwidth indicator function

- Device embedded network diagnosis function

- Log upload function

Support

- PC screen share driver supports 64 bit OS

1.1.2 Initial release

NOTE

*: Ver.2.0.4 is specially developed to enable one time update from Ver.2.0.4 to

Ver.3.0.1.

Technical Bulletin PAGE: 1/2

Model: MD-A1b Date: 06-Mar-12 No.: RE0A0002

Subject: Cursor Indicator Disappear when initial set-up Prepared by: Shingo Ishizu

From: 2nd Tech Service Sect., MFP/P Tech Service Dept.

Classification: Troubleshooting

Mechanical

Paper path

Product Safety

Part information

Electrical

Transmit/receive

Other ( )

Action required

Service manual revision

Retrofit information

Tier 2

Note: The following symptom was reported in the Japan domestic market.

SYMPTOM

The cursor disappears when the “up” arrow ( ) is pressed during the initial set-up.

Normal:

After the ( ) key is pressed:

Technical Bulletin PAGE: 2/2

Model: MD-A1b Date: 06-Mar-12 No.: RE0A0002

CAUSE

Software bug

SOLUTION

Temporary:

Turn the machine OFF/ON, and then do the initial set-up again.

Permanent:

The firmware will be modified and then released in March 2012.

echnical

ulletin PAGE: 1/1

Reissued:12-Jun-12

Model:

MD-A1b

Date:

06-Mar-12

No.:

RE0A0003a

RTB Reissue

The items in bold italics were corrected or added.

Subject:

Firmware Update Failure

Prepared by:

Shingo Ishizu

From:

2nd Tech Service Sect., MFP/P Tech Service Dept.

Classification:

Troubleshooting

Mechanical

Paper path

Product Safety

Part information

Electrical

Transmit/receive

Other ( )

Action required

Service manual revision

Retrofit information

Tier 2

Note: This RTB was issued as troubleshooting information about a symptom reported on

the domestic model in Japan.

SYMPTOM

Firmware update failure

CAUSE

The bandwidth of the customer’s network is narrow and unstable.

SOLUTION

Update the firmware in another network environment, where the bandwidth is broader and

more stable.

For example, bring the customer’s MD-A1b to your office, perform the update there, and

then return the MD-A1b to the customer.

Note: The firmware will be modified to avoid this symptom, and is planned for a March

2012 release.

echnical

ulletin PAGE: 1/2

Model:

MD-A1b(P3000)

Date:

31-May-12

No.:

RE0A0004

Subject:

How to determine the cause when repairing

Prepared by:

S. Ishizu

From:

2nd Tech Service Sect., MFP/P Tech Service Dept.

Classification:

Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other ( ) Tier 2

This is how to determine the cause when repairing.

No.1

Symptom Action

Microphone does not work

Cause

1. Microphone is defective

2. Audio board is defective

3. Main board is defective

1. It is possible that the customer has inadvertently

activated the microphone mute feature. Try

performing a conference at the repair depot and

check whether the microphone is actually picking

up sound.

2. If the symptom is duplicated, it is possible that the

microphone mute LED is broken. Confirm whether

this LED lights when the main power is turned ON

(since all LEDs should light at this time).

3. If the microphone mute LED does light, check to

see it the microphone hole is covered by the

rubber lining that is normally attached around it.

4. If the microphone hole is not covered, replace the

microphone.

5. If the symptom still occurs after replacing the

microphone, replace the audio board.

6. If the symptom still occurs, the machine cannot be

repaired.

No.2

Symptom Action

Video is not displayed

Cause

Camera assembly is

defective

1. Replace the camera assembly, connect the

device to the network, and then turn the device

main power ON.

2. In the Contacts screen, check whether video can

be displayed.

3. If the symptom still occurs, the machine cannot be

repaired.

No.3

Symptom Action

No sound

Cause

1. Audio board is defective

2. Speaker is defective

1. Replace the audio board.

2. If the symptom still occurs, replace the speaker.

echnical

ulletin PAGE: 2/2

Model:

MD-A1b(P3000)

Date:

31-May-12

No.:

RE0A0004

No.4

ymptom Action

he PC Screen Share drive

s not displayed

ause

ain board is defective

1. Boot up the device and check whether the PC

Screen Share drive is displayed in the Contacts

screen.

2. If the symptom still occurs, the machine cannot be

repaired.

No.5

Symptom Action

“An error occurred during

warm-up” is displayed

Cause

1.Audio board is defective

2.Wireless LAN PCB,

antenna harness, and/or a

antenna is defective

3.Main board is defective

1. Replace the audio board, connect the device to

the network, and then turn the device main power

ON.

2. If the symptom still occurs, replace the Wireless

LAN PCB, antenna harness, and antenna.

3. If the symptom still occurs, the machine cannot be

repaired.

No.6

Symptom Action

One of the buttons does not

work

Cause

Audio board is defective

1. Check the buttons and replace any that are

damaged.

2. If the symptom still occurs, replace the audio

board.

If the symptom still occurs, the machine cannot be

repaired.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ricoh Imprimante

Ricoh

Ricoh A850 Manuel utilisateur

Ricoh

Ricoh Pro L5130 Instructions d'utilisation

Ricoh

Ricoh Pro L5160 Manuel d'entretien

Ricoh

Ricoh Aficio MP 201SPF Manuel utilisateur

Ricoh

Ricoh Aficio SG 3110SFNw Manuel utilisateur

Ricoh

Ricoh Aficio MP 1600SPF Manuel de service

Ricoh

Ricoh Priport HQ7000 Manuel de service

Ricoh

Ricoh Pro C9200 Manuel utilisateur

Ricoh

Ricoh SP150 series Manuel utilisateur

Ricoh

Ricoh AP2610 - Aficio B/W Laser Printer Manuel utilisateur

Ricoh

Ricoh 403079 - Aficio SP C410DN-KP Color Laser... Manuel utilisateur

Ricoh

Ricoh Pro C7100 Manuel utilisateur

Ricoh

Ricoh Aficio MP 7000 Manuel utilisateur

Ricoh

Ricoh PRO C751 Mode d'emploi

Ricoh

Ricoh aficio SG 2100N Manuel utilisateur

Ricoh

Ricoh P801 Manuel utilisateur

Ricoh

Ricoh SP 5300DN Manuel utilisateur

Ricoh

Ricoh SP4100N - Aficio SP B/W Laser Printer Instructions d'installation

Ricoh

Ricoh CL7200 - Aficio D Color Laser Printer Instructions d'installation

Ricoh

Ricoh C410DN - Aficio SP Color Laser Printer Instructions d'installation

Ricoh

Ricoh Pro L4130 Manuel utilisateur

Ricoh

Ricoh Aficio AP610 Manuel d'utilisation

Ricoh

Ricoh Pro Series Manuel utilisateur

Ricoh

Ricoh Aficio SP C840DN Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur