ReSound LiNX3D 67 Manuel utilisateur

Quick guide

ReSound LiNX 3D™ 67

My hearing aid information

Product: ReSound LiNX 3D

Model: 67

Serial Number (R):

_____________________________

Serial Number (L):

_____________________________

Battery Size: 312

Push Button:

(if set up by your hearing care professional)

ACTION RESULT

Short Push

Long Push

PROGRAM WHEN TO USE BEEPS

Programs:

(if set up by your hearing care professional)

Get to know your hearing aid

A. Program button

B. Microphones

C. Programming port for

cabled ﬁtting

D. Battery Door

View ReSound hearing aid tutorial videos at youtube.com/resoundus

E. Right/Left indicator

F. Thin tube

G. Dome

8/9

18.c

18.b

1. Program button

2. Battery compartment & On/Off switch

3. Sound outlet

4. Front microphone inlet

5. Back microphone inlet

6. Volume control (optional)

7. Direct audio input

8. Left/Right indicator (Left=Blue/Right=Red)

9. Battery lock (optional)

10. Model

11. Manufacturer

12. Serial number

13. LED indicator (optional)

14. Battery lock release (optional)

15. Earhook

16. Earmold and tubing

17. Thin Tube

18. Domes/earmold

a. Open dome

b. Tulip-Dome

c. Custom earmold

19. Sports lock (optional)

400144011-US-13.09-Rev.E.indd 9 25-09-2013 14:42:17

Open ﬁtting

(Thin Tube and dome)

Getting Started: On/O function

ON: Insert battery & completely close

battery door (D). Program 1 will

be active.

OFF: Open the battery door (D). Use

ﬁngertip to pull it all the way.

What you need to know

OFF

Inserting/Replacing the battery:

1. Open the battery

door (D)

completely by

using your ﬁngertip.

2. Remove protective sticker from

battery and wait 2 minutes

before

inserting the

battery into the

hearing aid to

allow full activation of the battery.

3. Insert the new battery with the

positive side (ﬂat side) in the

correct position, as shown above.

4. Gently close the battery door. If it

doesn’t close easily, check to see

if the battery is upside down.

Daily: Clean your hearing aid.

Keep your hearing aids dry. Clean

the hearing aids using a soft cloth

or tissue.

Weekly: Clean the thin tubes and

domes/earmold.

1. Remove thin tubes (F) from hearing

aids before cleaning by unscrewing

them counter clockwise.

2. Wipe down thin tubes and domes (G)

with a soft cloth.

3. In order to clear the thin tube of

moisture and debris, push the black

cleaning rod through the thin tube,

beginning at the end opposite

the dome.

Regular care & maintenance

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

As needed: Change dome (G)

(if applicable)

ReSound standard domes

1. Push the new dome on to the

thin tube.

2. Make sure that the new dome is

properly and securely maintained.

ReSound tulip domes

Tulip domes consist of two “petals”. It

is important that the largest petal is

the outermost petal. To ensure this:

1. Push the largest petal away from

the thin tube using a ﬁnger.

This bends the petal forward.

2. Then push the largest “petal”

back, and it will be placed on top

of the smaller petal.

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

Flight Mode:

Some airlines prohibit the use

of wireless hearing aids (RF

transmitters) onboard. If required

by your airline, enable ﬂight mode:

Disable wireless operation by opening

and closing the battery door (D)

three times within ten seconds

(open-close, open-close, open-close).

Your instruments will now be in

ﬂight mode.

The hearing aids must function in

ﬂight mode for 10 seconds before

wireless operation can be re-enabled.

To re-enable wireless operation,

open and close the battery door one

time and wait thirty seconds before

opening the battery door again to

avoid accidentally entering ﬂight

mode again.

For more information

400708011 Rev A 2017.02

Refer to the user guide included in

your hearing aid box.

Your hearing care professional can

be reached at:

View ReSound hearing aid tutorial

videos at youtube.com/resoundus.

ReSound Government Services

8001 E. Bloomington Freeway

Bloomington, MN 55420

1-800-392-9932

www.resound.com/veterans

Manufacturer according

to FDA:

ReSound North America

8001 E. Bloomington Freeway

Bloomington, MN 55420

1-888-735-4327

resound.com

Manufacturer according

to Health Canada:

ReSound Canada

303 Supertest Road

Toronto, Ontario M3J 2M4

1-888-737-6863

resound.com

Beep/tone indicators

View ReSound hearing aid tutorial videos at youtube.com/resoundus

BEEP/TONE INDICATION ACTION REQUIRED

Ding, ding, ding,

dong

Low battery Change battery

Ding (5 or 10) Hearing aid is starting up After dings cease, hearing

aid is turned on

Ding-ding,

ding-ding, etc.

Hearing aid is in ﬂight

mode

Use in ﬂight mode if

desired, or open-close

battery door to exit

ﬂight mode

Ripple Tone Hearing aid is in

streaming mode

Use with wireless

accessory or press

multi-function button

to exit streaming mode

Troubleshooting

SYMPTOM CAUSE POSSIBLE REMEDY

No Sound Battery door not closed

Dead battery

Battery door will not close

Blocked earmold or tube

Blocked wax ﬁlter

Turn on by closing the battery door (D)

Replace battery

Insert battery properly

Clean earmold or tube (F)

Replace wax ﬁlter or consult your

hearing care professional

Not loud enough Blocked earmold or dome

Change in hearing, volume too low

Excessive ear wax

Clean earmold, replace dome (G)

Consult your hearing care professional

Excessive

whistling/feedback

Incorrect earmold placement

Incorrect dome placement

Excessive ear wax

If none of the above

Re-insert earmold carefully

Re-insert dome (G)

Clean guard/consult your hearing care professional

Consult your hearing care professional

Wireless does not work Device may be in ﬂight mode Open and close the battery compartment once.

Wireless operation will reactivate ten seconds

later.

If there are any other problems not mentioned in this guide, please contact ReSound or your hearing care professional.

Table des matières

Autres manuels ReSound Prothèse auditive

ReSound

ReSound ONE 9 Manuel utilisateur

ReSound

ReSound Standard Tube Manuel utilisateur

ReSound

ReSound GN ENZO Q 88 Manuel utilisateur

ReSound

ReSound Phone Clip+ Manuel utilisateur

ReSound

ReSound LiNX Quattro 61 Manuel utilisateur

ReSound

ReSound ALERA Manuel utilisateur

ReSound

ReSound Match Series Manuel utilisateur

ReSound

ReSound ENZO QUATTRO Series Manuel utilisateur

ReSound

ReSound Match MA2T70-V Manuel utilisateur

ReSound

ReSound X-plore BTE XE71-DVI Manuel utilisateur

ReSound

ReSound Vea Instructions de montage

ReSound

ReSound V30 Manuel utilisateur

ReSound

ReSound LiNX 3D 88 Manuel utilisateur

ReSound

ReSound VE10 Manuel utilisateur

ReSound

ReSound ENZO 3D Manuel utilisateur

ReSound

ReSound ONE Manuel de service

ReSound

ReSound x-Plore XE30 Manuel utilisateur

ReSound

ReSound ONE Manuel utilisateur

ReSound

ReSound LiNX 3D 77 Manuel utilisateur

ReSound

ReSound Danalogic Ambio BTE Manuel utilisateur

ReSound

ReSound Nexia 62 Manuel utilisateur

ReSound

ReSound Enya ITC Manuel utilisateur

ReSound

ReSound PH13 Manuel utilisateur

ReSound

ReSound Match MA50-P Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur