ReSound LiNX 3D 62 Manuel utilisateur

Quick guide

ReSound LiNX 3D™ 62

My hearing aid information

Product: ReSound LiNX 3D

Model: 62

Serial number (R):

_______________________________

Serial number (L):

_______________________________

Battery size: 13

Multi-function button (A):

MULTI-FUNCTION

BUTTON ACTION

RESULT

Short press UP

Short press DOWN

Long press UP

(3 seconds)

Long press DOWN

(3 seconds)

PROGRAM WHEN TO USE BEEPS

Programs:

(if set up by your hearing care professional)

Get to know your hearing aids

A. Multi-function button

B. Microphone

C. Receiver

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

D. Dome

E. Battery door

F. Right/Left indicator

Getting started: On/O function

ON: Insert battery & completely

close battery door (E).

Program 1 will be active.

OFF: Open the battery door. Use

ﬁngertip to pull it all the way.

What you need to know

OFF

Inserting/Replacing the battery:

1. Open the battery door (E)

completely

by using

your ﬁngertip.

2. Remove protective sticker from

battery and wait 2 minutes before

inserting the

battery into the

hearing aid to

allow full activation of the battery.

3. Insert the new battery

with the positive side

(ﬂat side) in the

correct position, as shown.

4. Gently close the battery door.

If it doesn’t close easily, check to

see if the battery is upside down.

As needed: Change domes (D)

ReSound standard domes

1. Push the new dome over the

receiver.

2. Make sure that the new dome is

properly and securely maintained.

ReSound tulip domes

Tulip domes consist of two “petals”. It

is important that the largest petal is

the outermost petal. To ensure this:

1. Push the largest petal away from

the receiver tube using a ﬁnger.

This bends the petal forward.

2. Then push the largest “petal”

back, and it will be placed on top

of the smaller petal.

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

Daily: Clean your hearing aid.

Keep your hearing aids dry. Clean

the hearing aids using a soft cloth

or tissue.

Weekly: Clean the receiver tubes

and domes (D).

Use a soft cloth to clean the

receiver tube and dome on the

outside. Do not use water when

you are cleaning the receiver tubes.

Regular care & maintenance

Flight mode:

Some airlines prohibit the use of

wireless hearing aids (RF transmitters)

onboard. If required by your airline,

enable ﬂight mode:

Disable wireless operation by

opening and closing the battery

compartment three times within ten

seconds (open-close, open-close,

open-close). Your instruments will

now be in ﬂight mode.

The hearing aids must function in

ﬂight mode for 10 seconds before

wireless operation can be re-enabled.

To re-enable wireless operation,

open and close the battery door one

time and wait thirty seconds before

opening the battery door again to

avoid accidentally entering ﬂight

mode again.

Monthly: Change the wax guard or

see your hearing care professional.

For changing CeruSTOP™(white) wax

guards, complete the following steps:

1. Removal: Insert the removal side

of the wax guard tool into the

used wax guard so that the shaft

of the tool is touching the rim

of the wax guard. Slowly pull

the wax guard straight out.

removal side replacement side

Wax guard tool

2. Insertion: To insert the new wax

guard, gently press the

replacement side of the wax

guard tool straight into the

hole of the sound outlet until the

outer ring lies ﬂush with the

outside of the receiver. Pull the

tool straight out. The new wax

guard will remain in place.

Beep/tone indicators

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

BEEP/TONE INDICATION ACTION REQUIRED

Ding, ding, ding, dong Low battery Change battery

Ding (5 or 10) Hearing aid is starting up After dings cease,

hearing aid is turned on

Ding-ding,

ding-ding, etc.

Hearing aid is in ﬂight mode Use in ﬂight mode if desired,

or open-close battery door to

exit ﬂight mode

Ripple tone Hearing aid is in streaming

mode

Use with wireless accessory

or press multi-function

button to exit streaming

mode

Troubleshooting

SYMPTOM CAUSE POSSIBLE REMEDY

No sound Battery door not closed

Dead battery

Battery door will not close

Blocked earmold or tube

Blocked wax guard

Turn on by closing the battery door (E)

Replace battery

Insert battery properly

Clean earmold or tube

Replace wax guard or consult your hearing care

professional

Not loud enough Blocked earmold or dome

Change in hearing, volume too low

Excessive ear wax

Clean earmold, replace dome, replace guard

Consult your hearing care professional

Excessive

whistling/feedback

Incorrect earmold placement

Incorrect dome placement

Excessive ear wax

If none of the above

Re-insert earmold carefully

Re-insert dome (D)

Clean guard/consult your hearing care professional

Consult your hearing care professional

Wireless does not work Device may be in ﬂight mode Open and close the battery compartment (E) once.

Wireless operation will reactivate ten seconds later.

If there are any other problems not mentioned in this guide, please contact ReSound or your hearing care professional.

For more information

400703011 Rev B 2017.02

ReSound Government Services

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.800.392.9932

www.resound.com/veterans

Manufacturer according

to FDA:

ReSound North America

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.888.735.4327

resound.com

Manufacturer according

to Health Canada:

ReSound Canada

303 Supertest Road

Toronto, Ontario M3J 2M4

1.888.737.6863

resound.com

Refer to the user guide included in

your hearing aid box.

Your hearing care professional can

be reached at:

View ReSound hearing aid tutorial

videos at youtube.com/resoundus.

Table des matières

Autres manuels ReSound Prothèse auditive

ReSound

ReSound LINX 3D Manuel utilisateur

ReSound

ReSound XE10 Manuel utilisateur

ReSound

ReSound V30 Manuel utilisateur

ReSound

ReSound GN ENZO Q 88 Manuel utilisateur

ReSound

ReSound MIH-S Manuel utilisateur

ReSound

ReSound Linx Quattro Instructions de montage

ReSound

ReSound BTE Manuel utilisateur

ReSound

ReSound Nexia 61 RIE Manuel utilisateur

ReSound

ReSound ENZO QUATTRO Series Manuel utilisateur

ReSound

ReSound Ziga Mini BTE ZG60-DI Manuel utilisateur

ReSound

ReSound Azure Manuel utilisateur

ReSound

ReSound BE70 Manuel utilisateur

ReSound

ReSound X-plore BTE XE61-DI Manuel utilisateur

ReSound

ReSound Standard Tube Manuel utilisateur

ReSound

ReSound LiNX Quattro MIH Manuel utilisateur

ReSound

ReSound 10 CIC Manuel utilisateur

ReSound

ReSound LINX 3D Instructions de montage

ReSound

ReSound AVENTA 3.9 Instructions de montage

ReSound

ReSound Nexia 62 Manuel utilisateur

ReSound

ReSound ENZO 2 Instructions de montage

ReSound

ReSound LiNX 3D ITC Manuel utilisateur

ReSound

ReSound Smart 3D Manuel utilisateur

ReSound

ReSound Vea VE30 Manuel utilisateur

ReSound

ReSound X-plore BTE XE81-DVI Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur