Reolink E1 Zoom Manuel utilisateur

E1 Zoom

Reolink E1 Zoom is also doing well at night, with 10pcs IR LEDs to cover up to 40ft

in low-light conditions. It catches a glimpse of your house in Super HD. Or zoom in

to see the details of what you care, without image impairment.

1. Specs

1

Daylight Sensor

2

10 IR LEDs

3

Lens

4

Status LED

5

Built-in Mic

6

Reset Button

7

Micro SD Card Slot

Status Light

Status Light

Camera Status

Solid Blue

Camera is starting up/

WiFi connection succeeded

Blinking Blue

WiFi is not configured/

WiFi connection failed

2. Setup and Install

Set up the Camera

What’s in the Box

Note: The package content may vary and update with different version and

platforms, please take the below information only for a reference. And the actual

package content are subject to the latest information on the product selling page.

E1 Zoom

1

Speaker

2

Power

Set up the Camera on the App

You may follow the steps below to set up the camera.

Step 1. Tap the icon in the top right corner to start the initial setup.

Step 2. Scan the QR code on the back of the camera. You could also tap Input

UID/IP and enter the UID (16-digit characters under the QR code of the

camera). Then tap Next.

Mounting Template *1

Surveillance Sticker*1

Pack of Screws*1

Reset Needle*1

E1 Zoom *1

Quick Start Guide*1

Mounting Plate *1

Power Adapter*1

Step 3. Tap Wi-Fi Not Configured. Make sure your camera stays powered on

and tap Next.

Step 4. If you hear the voice prompts as shown in the picture or a

repeated ding sound, tick correspondingly and tap Next.

Step 5. Enter the WiFi password of the selected WiFi network and tap Next.

Note: E1 Zoom support a 2.4 GHz or 5GHz WiFi network of your choice.

Step 6. Tap Scan Now. Place the QR code on your phone in front of the

camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan

the QR code.

After hearing a beep sound, tick correspondingly and tap Next.

Step 7. Wait around 60 seconds for the camera to connect to the router. If you

hear "connection to the router succeeded", tick correspondingly and tap Next.

Note: If you heard the voice prompt "Connection to the router failed", please

make sure you've entered the WiFi information correctly in the previous step.

Step 8. Create the password for your camera. Then tap Next.

Step 9. Name your camera. Then tap Next.

Step 10. Initialization finished. You can start using your camera now.

Install the Camera

Here is a guide on how to install the camera to the ceiling.

Step 1. Install the Mounting Plate.

Drilling two screw holes on the wall according to the mounting hole template.

Insert the two plastic anchors into the holes in the wall.

Secure the base unit in place by tightening the screws into the plastic anchors.

Step 2. Attach the Camera.

Align the camera with the bracket, then turn the camera unit clockwise to lock it in

position.

Notes:

To remove it from the ceiling, turn the camera counterclockwise.

In case your camera is mounted upside down, its picture shall be rotated as

well. Please go to Device Settings >Display on Reolink App/Client and

click Flip Vertical to adjust the image.

Table des matières

Autres manuels Reolink Caméra de sécurité

Reolink

Reolink RLC-81PA Manuel utilisateur

Reolink

Reolink E1 Pro Manuel utilisateur

Reolink

Reolink E1 Series Manuel utilisateur

Reolink

Reolink Argus Eco Guide de démarrage rapide

Reolink

Reolink C1 Pro Manuel utilisateur

Reolink

Reolink Argus 2 Manuel utilisateur

Reolink

Reolink NVS8-5KB4-A Guide de démarrage rapide

Reolink

Reolink Argus 2 Manuel utilisateur

Reolink

Reolink RLC-820A Manuel utilisateur

Reolink

Reolink C2 Manuel utilisateur

Reolink

Reolink E1 Series Manuel utilisateur

Reolink

Reolink Go PT Manuel utilisateur

Reolink

Reolink Argus 2E Manuel utilisateur

Reolink

Reolink 5408940 Manuel utilisateur

Reolink

Reolink TrackMix PoE Manuel utilisateur

Reolink

Reolink RLC-1212A Guide de démarrage rapide

Reolink

Reolink Go Guide de démarrage rapide

Reolink

Reolink Go PT Manuel utilisateur

Reolink

Reolink RLC-812A Guide de démarrage rapide

Reolink

Reolink B800 Manuel utilisateur

Reolink

Reolink RLC-511WA Manuel utilisateur

Reolink

Reolink Argus PT Lite Manuel utilisateur

Reolink

Reolink Argus Manuel utilisateur

Reolink

Reolink Duo 4G Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur