Renner Kompressoren RS-B Manuel d'instructions
Please read carefully before commissioning and follow
instructions. Keep in a safe place for future use.
Installation, Operation &
Maintenance
Manual
RS-B
RENNER GmbH Kompressoren
Emil-Weber Str. 32
D-74363 Gueglingen
el: +49 (0)7135 931 93 0
Fax: +49 (0)7135 931 93 50
info@renner-kompressoren.de
www.renner-kompressoren.de
GB
English Version V 06 / 2016
Table of contents Content-
I
Table of contents
Nr. Subject page
0.1 General information 0-2
0.2 Structure and use of this manual 0-4
0.3 Intended usage / misuse 0-6
0.4 Re uirement of the user 0-7
0.5 Personnel responsibilities 0-8
Nr. Subject page
1.1 Symbols 1-2
1.2 Basic safety advice 1-3
1.3 Accident conduct 1-6
Nr Subject page
2.1 Authorised access points 2-2
2.2 Safety devices 2-4
2.3 Compressor unit 2-5
2.4 Instrumentation panel RENNERlogic 2-9
2.5 RENNERtronic Control (optional) 2-10
2.6 RENNERtronic plus Control (optional) 2-11
2.7 Refrigeration dryer (optional) 2-12
Chapter
0
General
information
Chapter
1
Safety advice
Chapter
2
achine
description
Table of contents Content-
II
Table of contents (continuation)
Nr. Subject page
3.1 Compressor installation 3-2
3.2 Connections 3-3
3.3 Putting into operation 3-5
Nr. Subject page
4.1 Control instrumentation RENNERlogic 4-2
4.2 Control instrumentation RENNERtronic 4-3
4.3 Control instrumentation RENNERtronic plus 4-5
4.4 Compressor startup / normal use 4-6
4.5 To stop the compressor 4-8
4.6 Failures during operation 4-10
Chapter
3
Installation &
putting into
operation
Kapitel 4
Operating / normal
use
Table of contents Content-
III
Nr. Subject page
5.1 What to take into account 5-2
5.2 Remove faults 5-4
5.3 Venting the compressor system 5-5
5.4 Cleaning work 5-6
5.5 Checking oil level 5-7
5.6 Change of oil filter 5-8
5.7 Changing oil 5-9
5.8 Cleaning oil level sight glass 5-10
5.9 Cleaning oil cooler 5-11
5.10 Checking safety valve 5-12
5.11 Tensioning and changing drive belt(s) 5-13
Nr. Subject page
6.1 Decommissioning of plant 6-2
6.2 Re-commissioning after storage 6-4
6.3 Shut-down and disposal 6-5
Chapter
5
aintenance
Chapter
6
Decommissioning
and disposal
Table of contents Content-
IV
Nr. Subject
AT Data sheet
ACE CE Conformity Declaration
AW1 Maintenance check
AW2 Motor bearings
AW3 Maintenance work
ADS Pressure switch
AKT Refrigeration dryer (optional)
Appendixes
0 General Information
0 - 1
Chapter 0
General Information
Hereunder you will find general information relating to the
following subjects:
Utilisation of the INST LL TION, OPER TION &
M INTEN NCE M NU L
Compressor Operation and Usage
Personnel responsibilities
This chapter relates to the following subjects:
No. Subject Page
0.1 General information 0-2
0.2 Structure and use of the manual 0-4
0.3 Intended Usage 0-5
0.4 Requirement of the user 0-6
0.5 Personnel responsibilities 0-7
Contents
Survey
0 General Information
0 - 2
0.1 General Information
General information regarding this manual.
This manual is applicable to the following compressor:
Compressor Detail Classification
Type Screw compressor
Year of construction
Serial number
Model
Location
RENNER GmbH compressors
Emil-Weber-Strasse 32
D-74363 Gueglingen
June 2016
This manual should be kept in a clean safe condition and
should be readily available to authorised personnel at all
times.
Do not remove any pages from this manual.
ny lost or mislaid pages should be replaced especially if
they relate to health and safety matters.
Continuation next page
Contents
alidity
Manufacturer
Date of issue
Safe
-
keeping and
completeness
0 General Information
0 - 3
0.1 General Information (Continuation)
This documentation contains copyrighted information.
Without prior consent of RENNER GmbH this information
must not be photocopied, duplicated, translated or put on
data carrier neither as a whole or part document.
RENNER GmbH reserves all further rights.
For safety reasons any modification or alteration may be
permitted only after having received the agreement of the man-
ufacturer.
If modifications are made without the prior agreement of the
manufacturer all warrantees and manufacturers responsibilities
will be invalidated.
In these cases, the process for conformity evaluation pursuant
to 2006/42/EC for all components may need to be carried out
again.
The following suppliers documents are part of this manual and
must be kept save and related to:
Documents for manufacturer
RENNERtronic
controller
RENNER GmbH
Operation manual air
dryer
RENNER GmbH
D-74363 Güglingen
*
)
in case the compressor is equipped with any of these options
Copyright
Modification of the
compressor
Suppliers’
documents *
)
0 General Information
0 - 4
0.2 Structure and use of this manual
The following information relates to the structure and use of this
manual.
This manual contains the following chapters:
Chapter
Summary
0
General Information regarding:
– the manual,
– its usage
– personnel responsibilities
1
Definition of the symbols used
Basic safety instructions
2
Description and function of the compressor
3
Operating the compressor
4
Maintenance hints
(xy)
ppendix (es)
The pages have been consecutively numbered according to
the chapter:
Example: 3-2
Signifies: Chapter 3, Page 2
Example: S-1
Signifies: ppendix and „S“ for control, Page 1
Continuation next page
Contents
Chapter
Numbering
of pages
0 General Information
0 - 5
0.3 Intended usage / misuse
The intended usage of the compressor is described
Persons are regarded as authorized, when they have received
adequate training/instruction and is then charged with defined
work on or with the compressor... Keys to the guard doors must
only be made accessible to authorized persons.
The compressor should only be used according to the manu-
facturer recommendations in conjunction with the following
bullet points.
The compressor must be used only for the compression
of technically clean air without any detrimental or explosive
additives or impurities.
mbient temperature must be below 40°C*.
uthorized persons only are allowed to work on the
compressor
The machine must only be operated with the safety devices
installed
The safety* and operating advice contained in this manual
must be observed
ny instructions given by the operating company must be
observed
The legal accident prevention rules must be respected
Misuse is regarded as:
Operation by non-authorized persons
Operation by disregarding rules and regulations
Operation without corresponding treatment / cleansing
of the compressed air in the field of foodstuffs and breathing
air
Operation with defective safety-devices or those deactivated
or modified
*
please consult your dealer or the manufacturer with details in case the ambient
temperature is higher in your compressor room
Definition:
authorized persons
Intended usage
Misuse
Table des matières
Autres manuels Renner Kompressoren Compresseur
Manuels Compresseur populaires d'autres marques
Emerson
Emerson Copeland Scroll Digital HLR Series Mode d’emploi
Drawmer
Drawmer 1968 MKII Manuel utilisateur
Badger Air-Brush
Badger Air-Brush X-Air 80-8 Mode d’emploi
Omnitronic
Omnitronic CL-166 Manuel utilisateur
Scheppach
Scheppach HC24V Instructions de montage
Ingersoll-Rand
Ingersoll-Rand centac C950 Manuel technique
