Renesas RZ/A2M Manuel utilisateur

Quick Start Renesas Evaluation Board Kit

for RZ/A2M

Display Output

Board

User Switches

User LED

MIPI Camera

Header

Reset Switch

Debugger Header

Power LED

J-Link Lite

Debugger

Power Switch

CPU Board

Socket

CPU Board

Sub Board

MIPI 8MP

Camera Board

USB Power

(Mini USB)

USB Serial

(Micro USB)

NOTE: This Quick Start Guide covers installation of the e2studio IDE (available from https://www.renesas.com/e2studio

where version 7.3.0 or later is required). An active internet connection is requiredfor downloading the installer.

1. Installation

Do not connect the debugger module until the software support has been installed.

Internet access is required during the installation process.

1. Software for this Renesas Evaluation Board Kit is available for download from;

2. After download the installerwill run and displaythe Welcome dialog box. Follow theon-screen instructions to install

the IDE software, selectingthe RZ device family when prompted.This process will take several minutes.

Note:

Windows™10 / 8.1 / 8 / 7 users may see “User Account Control” dialog box. If applicable, enter the administrator

password and click ‘Yes’.

The Windows™driver signing dialog box may be displayed. Please accept the driver to continue.

Users may seea Renesastrust certificatedialog box. If applicable select the checkbox to trustthe certificate.

https://www.renesas.com/rza2mevb

2. Preparing the Evaluation Board Kit

3. Connect the CPUboardto the sub board usingthe 204-pin connector (note the keyslot isto the left of centre).

Orientate at approximately 45° fromhorizontal, inserting the edgeconnector fully into the socketbeforegently

rotatingthe CPUboarddown flat until the clampslock the board in place.

Sub Board

CN1

Actions for inserting CPU

Board in Sub Board CN1

4. Connect the Display Output Board to the display connector(CN15 LCD) onthe sub board. The centralkey ensures

correctorientation byaligning it with the slotin the socket.

5. Connect the Display Output Board to an external monitor capable of 800x600 resolution using a monitor cable (not

supplied).

6. Connect the camera module to the camera connector (CN2 MIPI) on the CPU board.

Open the connector bypulling up on the tagsat either side, then insert the camera’s ribbon cable. The correct

orientation is with the contacts on the ribbon cable facing the CPU, and the blue insulated rectangle to the outside.

To hold the cable firmly, push down on the top of the connectoruntilit clips inplace.

Pull tags to open

Push centre to close

7. Connect the J-Link LITE Segger debugger module to the debugger connector (CN5 Coresight 20) on the CPU

board usingthe ribbon cable.Ensure that pin 1 (red strand) mates with the triangle mark ► on the PCB silk screen.

8. Connect the debuggermodule to a USB port on the host PC. The green LED on the debuggerwillilluminate.

9. The debugger driverswillnow be installed. Note that,this may take up toa minute and administrator privileges will

be required.

Windows™ 7

Windows™ 8.1 / 8

Windows™ 10

“Device driver software installed

successfully” pop-up will appear in

the Windows™ Taskbar and

installation will complete.

An icon will appear in the Windows™

Taskbar and installation will

complete.

A Windows™ taskbar buttons of

“Device Setup” willappear in the

Windows™ Taskbar and installation

will complete.

10. Connect a USB cable between the micro USB Serial connector (CN5 UART) on the sub board and a USB porton

the hostPC. The board willenumerate inthe Device Manager underPorts (COM &LPT) Communications Port

(COMn) as “RZA USB Serial Port”. The micro USB Serial connector (CN5 UART) on the sub board may be used to

providea serialconsole forthe sample applications.

If you have not previously installed another Renesas kit with this virtual serial port driver, or if the boardenumerates

as an “Unknown device,”then disconnect the board and install the “RZ/A2M Evaluation Board Kit inf File for USB to

Serial Conversion IC” available from https://www.renesas.com/software/D6002724.html

a. Note: Windows™10 / 8.1 /8 / 7 usersmay see “User Account Control”dialog box. If applicable, enter

the administrator password and click ‘Yes’.

b. The Windows™driver signing dialog box may be displayed. Please accept the driver to continue.

11. Use any serial terminal (e.g.HyperTerminal, Tera Term orPuTTY), select the appropriate COMport and set the

baud-rate to 115200 bps,Databits to8, Stop bitsto 1,Parity to Noneand FlowasNone.

12. Connect a USB cable between the mini USB Power connector (CN13 USB-F) on the sub boardand a USB port on

the host PC.

13. Apply power by moving SW1 away from the power jack; the blue power LED will illuminate.

14. Power down the systemby moving SW1towards the power jack.

3. Preparing the e2studio development environment

Renesas e2 studio integrates various tools such as compiler, assembler, debugger and editor into a common graphical

user interface.

15. Start e2 studio:

Windows™ 7: Start Menu >All Programs > RenesasElectronics e2studio >e2 studio

Windows™ 8.1 & 8: From Apps View , RenesasElectronics e2studio > e2 studio

Windows™ 10: Start Menu > All Apps > Renesas Electronics e2studio > e2 studio

16. In the ‘Select aworkspace’folderthat appears,browse a suitable locationand foldername to save yournew

workspace to. Click ‘OK’ to continue.

17. In the ‘Toolchain Registry’dialog box select Renesas Toolchains and ensure that ‘GCC ARM Embedded

6.3.1.20170620’ is selected. Click ‘Register’. A dialog box will appear "Selected Toolchains were successfully

integrated with e2 studio". Click ‘OK’.

18. If the ‘Code GeneratorRegistration’dialog box is shown, click ‘OK’ and follow the on-screen instructions to restart

e2studio. Thisis requiredbefore the Code Generatorcan be used.

19. To learn more onhow touse e2 studio, openthe program’s help filesby using Help> Help Contents.

4. Next Step

20. In the e2 studio Welcome screen, click the ‘Workbench’ arrow icon, on the farright.

You are ready to download and program an application from the RZ/A2M Simple Applications Package

(R01AN4494EJ).

21. Select one of the available application notes, and follow the instructions in the readme files,ensuring the correct

switch and jumpersettingsare made before applying power. Recommendations:

● If you have a display supporting 800x600 input,accessthe camera_display_sample (R01AN4477EJ).

● If you want to quickly check the kit’s operation, access the blinky_osfree_sample (R01AN4321EJ).

5. GNU ARM Compiler

The version of the compilerprovided with this evaluation board kit is fully functional.

6. User Manuals

The user manuals for this product are available at: https://www.renesas.com/rza2mevb

This includes, but not limited to:

● RZ/A2 Group User’s Manual: Hardware (R01UH0746EJ)

● CPU Board User’s Manual (R20UT4397EJ)

● Sub Board User’sManual(R20UT4398EJ)

7. Support

Online technical support and information is availableat: https://www.renesas.com/rza2mevb

Technical Contact Details

America: techsupport.america@renesas.com

Europe: https://www.renesas.com/eu/en/support/contact.html

Global & Japan: https://www.renesas.com/support/contact.html

Website: https://www.renesas.com/

D016404_11_S01_V02

R20UT4399EJ0200, 28-JAN-2019

Autres manuels Renesas Carte mère

Renesas

Renesas ISL68201-99140DEMO1Z Manuel utilisateur

Renesas

Renesas 8V9705 Series Manuel utilisateur

Renesas

Renesas Y-G-HYBRID-PLC-RF Manuel utilisateur

Renesas

Renesas EK-RA6M1 Manuel utilisateur

Renesas

Renesas RC32312A-EVK Manuel utilisateur

Renesas

Renesas RH850/X1x Manuel utilisateur

Renesas

Renesas ISL34341KIT1Z Manuel utilisateur

Renesas

Renesas ISL68201-99125DEMO1Z Manuel utilisateur

Renesas

Renesas RC21012A Manuel utilisateur

Renesas

Renesas TSI721-16GEBI Manuel utilisateur

Renesas

Renesas ISL29501-ST-EV1Z Manuel utilisateur

Renesas

Renesas EK-RA6M4 Manuel utilisateur

Renesas

Renesas ZMOD4510 Manuel utilisateur

Renesas

Renesas IDT 89EBPES16T7 Manuel utilisateur

Renesas

Renesas Y-RH850-X2X-MB-T1-V1 Manuel utilisateur

Renesas

Renesas RTK0EMX270S01020BJ Manuel utilisateur

Renesas

Renesas RTKA214023DE0000BU Manuel utilisateur

Renesas

Renesas Intersil ISL68201-99135DEMO1Z Manuel utilisateur

Renesas

Renesas ISL80410EVAL1Z Manuel utilisateur

Renesas

Renesas RTA-FoUSB-MON Manuel utilisateur

Renesas

Renesas RE01 15000KB Manuel utilisateur

Renesas

Renesas ISL78610EVKIT1Z Manuel utilisateur

Renesas

Renesas RA6 Series Manuel utilisateur

Renesas

Renesas 8T49N1012 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur