Remaco MAS-1818 Manuel utilisateur
Bracket can be used for the following installation as shown below.
Installation Guide (For MAS-1818 to MAS-2424) MAS
Operation
Pull
Pull down the screen
with lanyard.
1 2
1
2
To Use:
1212
To Keep:
Use hand to set at desired
position.
Pull down screen slightly
to release.
Guide the screen up without
releasing the landyard.
V: 3.0
CCOPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD Website: www.remacotech.com
* For details dimension ,
please refer to technical specifications at
www.remacotech.com
Screen Width
Lanyard
Wall Mount Ceiling Mount Extension Mount (Wall)
47
Power Drill
B) Drill Dia 8mm Holes to a depth 47mm.
STEP 1
STEP 2
STEP 3
8mm Drill
Important Notes:
All screens are thoroughly inspected and fully tested operational in factory.
We accept no liability whatsoever for any losses due to improper installation, operation, or any unauthorized alternation at the point of installation.
All trademarks contained in this installation guide are the property of their respective owners.
End
A) Mark the bracket position.
C
COPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD Website: www.remacotech.com
Sleeve Anchor
C) Sleeve Plastic Anchor into the hole.
Screen Frame
M6 Nylon Nut
( 4 Nos)
Sleeve Anchor
Dia 8 x 47 (M6x40)
( 4 Nos)
M6 Washer
( 4 Nos)
Spanner
or
Plier
Installation
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Remaco Écran de projection
Remaco
Remaco BKT-M595 Manuel utilisateur
Remaco
Remaco CMS-L3030 Manuel utilisateur
Remaco
Remaco PRO-1515 Manuel utilisateur
Remaco
Remaco XXL Series Manuel utilisateur
Remaco
Remaco PLT-419C Manuel utilisateur
Remaco
Remaco SAS-1515 Manuel utilisateur
Remaco
Remaco PRO Series Manuel utilisateur
Remaco
Remaco FAS Series Manuel utilisateur
Remaco
Remaco TEN XXL Manuel utilisateur
Remaco
Remaco PRO-1515 Manuel utilisateur
