Reliable G Series Manuel utilisateur

PendentUpright

Note: Not all versions of the product are shown.

Features

• Standard coverage, standard-response sprinklers

• Upright, pendent, horizontal sidewall, and vertical sidewall

deflectors

• Robust solder capsule thermal element

• Available in a wide variety of nishes

Product Description

Reliable Model G Series sprinklers are standard-response

standard spray automatic sprinklers using a solder capsule

thermal element. The solder is captured in the cylinder of the

capsule by a stainless steel ball. When the solder melts, the ball

moves into the cylinder allowing the thermal element to fall away

from the sprinkler. When this occurs, the compressed strut and

lever spring free from the sprinkler. System pressure then clears

the waterway of all operating parts allowing the deflector to

evenly distribute water.

Pendent and horizontal sidewall sprinklers may be installed

exposed or surface mounted using escutcheons such as the

Reliable Models B, C, or HB (reference Technical Bulletin 204).

When installed recessed, the Model G Series sprinklers are

specically listed with and may only be installed with listed

Reliable escutcheons. Refer to the technical information on the

following pages for specic listings for recessed installations and

Figures 6 and 7 for dimensional information.

www.reliablesprinkler.com

Model G Series

Standard-Response Sprinklers

Bulletin 110 January 2023

Sprinkler Summary

Model K-Factor gpm/psi1/2

(lpm/bar1/2)Listings & Approvals Threads Sprinkler Identication

Number (SIN)

G Upright

2.8 (40) UL, FM 1/2” NPT, ISO 7-R1/2 R1021

4.2 (60) UL 1/2” NPT, ISO 7-R1/2 R1023

5.6 (80) UL, FM, LPCB, EC, UKCA 1/2” NPT, ISO 7-R1/2 R1025

8.0 (115) UL, FM 1/2” NPT, ISO 7-R1/2 R1026

8.0 (115) UL, FM, LPCB, EC, UKCA 3/4” NPT, ISO 7-R3/4 R1027

G Upright

Intermediate

5.6 (80) UL, FM 1/2” NPT, ISO 7-R1/2 R1425

8.0 (115) UL, FM 3/4” NPT, ISO 7-R3/4 R1427

G Pendent

2.8 (40) UL, FM 1/2” NPT, ISO 7-R1/2 R1011

4.2 (60) UL 1/2” NPT, ISO 7-R1/2 R1013

5.6 (80) UL, FM, LPCB, EC, UKCA 1/2” NPT, ISO 7-R1/2 R1015

8.0 (115) UL, FM 1/2” NPT, ISO 7-R1/2 R1016

8.0 (115) UL, FM, LPCB, EC, UKCA 3/4” NPT, ISO 7-R3/4 R1017

G Horizontal

Sidewall

2.8 (40) UL 1/2” NPT, ISO 7-R1/2 R1231

4.2 (60) UL 1/2” NPT, ISO 7-R1/2 R1233

5.6 (80) UL, FM, LPCB 1/2” NPT, ISO 7-R1/2 R1235

8.0 (115) UL 1/2” NPT, ISO 7-R1/2 R1236

8.0 (115) UL 3/4” NPT, ISO 7-R3/4 R1237

G Vertical Sidwall 5.6 (80) FM, LPCB, EC, UKCA 1/2” NPT, ISO 7-R1/2 R1285

Table A

When tted with an approved water shield, these sprinklers may

considered intermediate sprinklers for use in racks, below grated

walkways, and other areas where intermediate level sprinklers are

required.

Model G Upright Sprinkler

Technical Specications

Style: Upright

Threads: (see Table B)

Nominal K-Factor: (See Table B)

Max. Working Pressure:

175 psi (12 bar)

Material Specications

Thermal Sensor: Solder capsule

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy with PTFE

Load Screw: Brass Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table F)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

165°F (74°C)

212°F (100°C)

286°F (141°C)

Guards & Shields

D-1 Guard (UL)

C-1 Guard (FM)

C-3 Guard with Shield (UL, FM on R1025,

R1026, and R1027 only)

Sprinkler Wrench

Model W2

Listings and Approvals

(See Table B)

Model G Upright Sprinkler Components and Dimensions Figure 1

SIN K-factor (US) K-factor (Metric) Threads Approvals

R1021 2.8 40 1/2” NPT, ISO 7-R1/2 UL, FM

R1023 4.2 60 1/2” NPT, ISO 7-R1/2 UL

R1025 5.6 80 1/2” NPT, ISO 7-R1/2

UL, FM, LPCB,

EC: 1438-CPR-0053

UKCA: 0832-UKCA-

CPR-S5104

R1026 8.0 115 1/2” NPT, ISO 7-R1/2 UL, FM

R1027 8.0 115 3/4” NPT, ISO 7-R3/4

UL, FM, LPCB,

EC: 1438-CPR-0053

UKCA: 0832-UKCA-

CPR-S5104

Model G Upright Sprinklers Table B

Bulletin 110

January 2023

Page 2 of 10

www.reliablesprinkler.com

Model G Intermediate Upright Sprinkler

Technical Specications

Style: Intermediate Upright

Threads: (See Table C)

Nominal K-Factor: (See Table C)

Max. Working Pressure:

175 psi (12 bar)

Material Specications

Thermal Sensor: Solder Capsule

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy with PTFE

Load Screw: Brass Alloy

Deflector: Brass Alloy

Sprinkler Finishes

Bronze (Only)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

165°F (74°C)

212°F (100°C)

286°F (141°C)

Guards & Shields

Factory Water Shield (cULus, FM)

Sprinkler Wrenches

Model W2

Listings and Approvals

(See Table C)

Model G Intermediate Upright Sprinkler Components and Dimensions Figure 2

SIN K-factor (US) K-factor (Metric) Threads Approvals

R1425 5.60 80 1/2” NPT, ISO 7-R1/2 UL, FM

R1427 8.00 115 3/4” NPT, ISO 7-R3/4 UL, FM

Model G Intermediate Upright Sprinklers Table C

Bulletin 110

January 2023

Page 3 of 10

www.reliablesprinkler.com

Model G Pendent Sprinkler

Technical Specications

Style:

Pendent

Recessed Pendent

Threads: (See Table D)

Nominal K-Factor: (See Table D)

Max. Working Pressure:

175 psi (12 bar)

Material Specications

Thermal Sensor: Solder Capsule

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy with PTFE

Load Screw: Brass Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table F)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

165°F (74°C)

212°F (100°C)

286°F (141°C)(1)

Recessed Escutcheons

G (cULus, all SIN)

G (FM, SIN R1015 only)(2)

F1 (cULus, all SIN)

F1 (LPCB, SIN R1015 only)

Guards & Shields(3)

D-1 Guard (UL)

D-5 Guard and Shield (UL, R1015, R1016, and

R1017)

C-1 Guard (FM)

C-5 Guard with Shield (FM on R1015 and R1017

only)

S-1 (1/2”) Shield (cULus, FM, R1015 only)

S-2 (3/4”) Shield (cULus, FM, R1017 only)

Sprinkler Wrenches

Model W2 (non-recessed pendent)

Model RC1 (recessed pendent)

Listings and Approvals

(See Table D)

Model G Pendent Sprinkler Components and Dimensions Figure 3

SIN K-factor (US) K-factor (Metric) Threads Approvals

R1011 2.8 40 1/2” NPT, ISO 7-R1/2 UL, FM

R1013 4.2 60 1/2” NPT, ISO 7-R1/2 UL

R1015 5.6 80 1/2” NPT, ISO 7-R1/2

UL, FM, LPCB,

EC: 1438-CPR-0053

UKCA: 0832-UKCA-

CPR-S5104

R1016 8.0 115 1/2” NPT, ISO 7-R1/2 UL, FM

R1017 8.0 115 3/4” NPT, ISO 7-R3/4

UL, FM, LPCB,

EC: 1438-CPR-0053

UKCA: 0832-UKCA-

CPR-S5104

Model G Pendent Sprinklers Table D

Bulletin 110

January 2023

Page 4 of 10

www.reliablesprinkler.com

Notes:

1. 286°F (141°C) temperature rated sprinklers not approved for recessed installations.

2. FM Approval of Model G Recessed sprinkler for ordinary and extra hazard occupancies is limited to wet pipe systems only.

3. Not suitable for recessed installations.

Model G Horizontal Sidewall Sprinkler

Technical Specications

Style: Horizontal Sidewall

Threads: (See Table E)

Nominal K-Factor: See Table E

Max. Working Pressure:

175 psi (12 bar)

Material Specications

Thermal Sensor: Solder Capsule

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy with PTFE

Load Screw: Brass Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table F)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

165°F (74°C)

212°F (100°C)

286°F (141°C)

Recessed Escutcheons(1)(2)

F1 (UL)

Guards & Shields(3)

D-1 Guard (UL, all SIN)

C-1 Guard (FM, SIN R1235 only)

Sprinkler Wrenches

Model W2 (non-recessed sidewall)

Model RC-1 (recessed sidewall)

Listings and Approvals(4)

(See Table E)

Notes:

1. Listed for use with 135°F (57°C) temperature rated sprinkler only.

2. Listed for Light Hazard ONLY when installed recessed.

3. Not suitable for recessed horizontal sidewall installations.

4. Listed for light hazard only, except for SIN R1235 is cULus Listed for ordinary hazard when exposed or surface mounted.

Model G Horizontal Sidewall Sprinkler Components and Dimensions Figure 4

Bulletin 110

January 2023

Page 5 of 10

www.reliablesprinkler.com

Note: Please refer to Figure 7 for recessed installation.

SIN K-factor (US) K-factor (Metric) Threads Approvals

R1231 2.8 40 1/2” NPT, ISO 7-R1/2 UL

R1233 4.2 60 1/2” NPT, ISO 7-R1/2 UL

R1235 5.6 80 1/2” NPT, ISO 7-R1/2 UL, FM, LPCB

R1236 8.0 115 1/2” NPT, ISO 7-R1/2 UL

R1237 8.0 115 3/4” NPT, ISO 7-R3/4 UL

Model G Horizontal Sidewall Sprinklers Table E

Model G Vertical Sidewall Sprinkler SIN R1285

Technical Specications

Style:

Upright Vertical Sidewall

Pendent Vertical Sidewall

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Thermal Sensor: Solder Capsule

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy with PTFE

Load Screw: Brass Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table F)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

165°F (74°C)

212°F (100°C)

286°F (141°C)

Guards & Shields

C-1 Guard (FM)

Sprinkler Wrenches

Model W2

Listings and Approvals(1)

FM Approved

LPCB

EC (1438-CP-0055)

UKCA: 0832-UKCA-CPR-S5104

Notes:

1. Listed and approved for Light Hazard ONLY.

Model G Vertical Sprinkler Components and Dimensions Figure 5

Bulletin 110

January 2023

Page 6 of 10

www.reliablesprinkler.com

Recessed Installation: Pendent Sprinklers Figure 6

Bulletin 110

January 2023

Page 7 of 10

www.reliablesprinkler.com

Recessed Installation: G Horizontal Sidewall Sprinklers Figure 7

MODEL G HORIZONTAL SIDEWALL SPRINKLER

WITH MODEL F1 RECESSED ESCUTCHEON

3/4" [19mm]

Escutcheon

Adjustment

Hole in Ceiling

Recommended

2 1/4" [57mm]

1 7/8" [48mm]

Turn collar tight

to wrench boss

2 7/8" [72mm]

1/4" [6mm] Min

1" [25mm] Max

1-1/4" [32mm] Min

2" [51mm] Max

Face of fitting

to ceiling

110RECHSW

Reducing

Fitting

(TOP VIEW)

G Escutcheon F1 Recessed

Bulletin 110

January 2023

Page 8 of 10

www.reliablesprinkler.com

Maintenance

Reliable Model G series sprinklers should be inspected and the

sprinkler system maintained in accordance with NFPA 25, as well

as the requirements of any authorities having jurisdiction.

Prior to installation, sprinklers should remain in the original

cartons and packaging until used. This will minimize the potential

for damage to sprinklers that could cause improper operation or

non-operation.

Do not clean sprinklers with soap and water, ammonia liquid or

any other cleaning fluids. Remove dust by gentle vacuuming

without touching the sprinkler.

Replace any sprinkler which has been painted (other than factory

applied). A stock of spare sprinklers should be maintained to

allow quick replacement of damaged or operated sprinklers.

Failure to properly maintain sprinklers may result in inadvertent

operation or non-operation during a re event.

Standard Finishes Special Application Finishes

Sprinkler G and F1 Recessed

Escutcheons Sprinkler Gand F1 Recessed

Escutcheons

Bronze Brass Bright Brass(5) Bright Brass

Chrome Chrome Satin Chrome Satin Chrome

White Polyester(3)(4) White Polyester Custom Color Polyester(3)(4) Custom Color Polyester

Lead Plated(6)(7)

Wax Coated(6)(7)(8)

Wax Over Lead(6)(7)(8)

Notes:

1. Other nishes and colors are available on special order. Consult your Reliable sales representative for details.

2. Paint or any other coating applied over the factory nish will void all approvals and warranties.

3. The Model G Recessed assembly consists of a sprinkler mounted in a galvanized steel cup with a nished trim ring.

4. Only frame and deflector are coated, operating parts are chrome plated.

5. For 212°F (100°C) maximum temperature rated sprinklers only.

6. Not suitable for use with recessed installations.

7. cULus Listed as corrosion resistant.

8. Clear wax used on ordinary temperature rated sprinklers; brown wax used on intermediate temperature rated sprinklers. Brown wax may be used on

high temperature rated sprinklers where the ambient temperature does not exceed 150°F (66°C).

Finishes(1)(2) Table F

Wrenches

Model W2 (upright, pendent, sidewall)

Model RC1 (recessed)

Application

Model G Series standard spray upright and pendent sprinklers

having K-factors of 5.6 (80) and higher are permitted to be used

in all occupancy classications and building construction types

unless otherwise noted.

Model G Series standard spray upright and pendent sprinklers

having K-factors less than 5.6 (80) are limited to light hazard

occupancies.

Model G Series sidewall sprinklers shall only be installed in

light hazard occupancies with smooth, horizontal or sloped, flat

ceilings unless otherwise noted.

Bulletin 110

January 2023

Page 9 of 10

www.reliablesprinkler.com

P/N 9999970005

Bulletin 110

January 2023

Page 10 of 10

www.reliablesprinkler.com

Installation

Model G Series sprinklers must be installed in accordance with

NFPA 13 and the requirements of all applicable authorities having

jurisdiction

Model G Series sprinklers must be installed with the Reliable

sprinkler installation wrench identied in this Bulletin. Any other

wrench may damage the sprinkler. A leak tight sprinkler joint

can be obtained with a torque of 8 to 18 lb-ft (11 - 24 N.m) for

1/2” sprinklers and a torque of 14-20 lb-ft (19 - 27 N.m) for 3/4”

sprinklers after applying appropriate thread sealant.

Do not tighten sprinklers over the maximum recommended

installation torque. Exceeding the maximum recommended

installation torque may cause leakage or impairment of the

sprinkler.

Guarantee

For the guarantee, terms, and conditions, visit

www.reliablesprinkler.com.

Ordering Information

Specify the following when ordering:

Model

• G

Deflector/Orientation

• Upright

• Upright Intermediate

• Pendent

• G Recessed

• Horizontal Sidewall

• Vertical Sidewall

Temperature Rating

• See sprinkler technical specications

Sprinkler Finish

• See Table F

Recessed Escutcheon*

• G

• F1

Escutcheon Finish

• See Table F

Sprinkler Wrench

• Model W2 (upright, non-recessed pendent, and sidewall)

• Model RC1 (recessed)

Guards and Shields

• See sprinkler technical specications

*Note: 286°F (141°C) sprinklers are not listed to be used recessed.

Autres manuels pour G Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Reliable Système d'irrigation

Reliable

Reliable F1FR56 Manuel

Reliable

Reliable N25 Manuel utilisateur

Reliable

Reliable F1 Series Manuel

Reliable

Reliable JL-14 Manuel utilisateur

Reliable

Reliable RFC30 Manuel utilisateur

Reliable

Reliable F3QR56 Dry Manuel

Reliable

Reliable F1FR28 Series Manuel utilisateur

Reliable

Reliable G6-56 Manuel utilisateur

Reliable

Reliable Concealer G4A Manuel utilisateur

Reliable

Reliable F1FR-FS LO Manuel utilisateur

Reliable

Reliable JL-14 Manuel utilisateur

Reliable

Reliable F1FR-FS LO Manuel

Reliable

Reliable Concealer G4A Manuel utilisateur

Reliable

Reliable DH56 HSW-PL Manuel utilisateur

Reliable

Reliable GXLO Series Manuel

Reliable

Reliable F4FR Manuel utilisateur

Reliable

Reliable J168 Manuel utilisateur

Reliable

Reliable JL-17 Manuel utilisateur

Reliable

Reliable F1FR80VdS Series Manuel

Reliable

Reliable Non-Ferrous Concealer Manuel utilisateur

Reliable

Reliable F1FR-FS56 Manuel

Reliable

Reliable GL112 Manuel utilisateur

Reliable

Reliable F1FR56 Manuel utilisateur

Reliable

Reliable F156 Series Manuel utilisateur

Manuels Système d'irrigation populaires d'autres marques

Hunter

Hunter Institutional Series Manuel utilisateur

Cellfast

Cellfast 52-305 Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Manuel utilisateur

Tyco Fire Product

Tyco Fire Product CENTRAL A Manuel utilisateur

Oral Care Technologies

Oral Care Technologies Hydro Floss Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Gem F892 Manuel utilisateur

Netafim

Netafim NETBEAT Manuel utilisateur

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Manuel utilisateur

Tyco

Tyco CC3 Manuel utilisateur

OpenSprinkler

OpenSprinkler OSPi Manuel utilisateur

EINHELL

EINHELL GE-WW 5537 E Manuel utilisateur

Valley

Valley Bender160 Manuel utilisateur

Toro

Toro 730 Series Guide rapide

Eden

Eden 97063-EDAMZ Manuel utilisateur

Tyco

Tyco TY-L Series Manuel utilisateur

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Manuel utilisateur

Johnson Controls

Johnson Controls tyco ESFR-17 Manuel utilisateur

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Manuel utilisateur