Rega P2 Manuel utilisateur

quick start guide

English

Français

Deutsch

Español

Rega Research. Made in England

English

Please follow this quick set up guide to ensure

optimum performance and perfect operation.

Failure to do so may invalidate your warranty.

For more information on this product

please visit www.rega.co.uk

Thank you for purchasing this

Rega product.

8

3

5

2

674Platter

2Drive belt & pulley

3Tonearm

5Plinth

6Power input

7Phono output

8On/Off switch

(underneath plinth)

4Balance weight

Unpacking the Planar 2

Always keep the turntable flat.

Follow the packing guide printed inside the front of the

box.

Save the packaging in case you need to transport your

turntable in the future.

Ensure the drive belt is in place and remove the

transport hub card from beneath the sub platter.

Carefully place the glass platter on the hub and fit the

turntable mat.

Place the turntable on a rigid level surface.*

2

*The Rega

turntable wall

bracket is the

ideal solution.

Cartridge alignment protractor

The Planar 2 comes with the Rega Carbon cartridge

aligned ready for play. If you need to replace or upgrade

the cartridge please use the cartridge alignment

protractor provided along with the cartridge

manufacturers guidelines.**

Manual speed change

You can change playing speed by simply removing the

glass platter and moving the drive belt between either the

33 ⅓rpm or 45rpm wheels of the drive pulley as shown.

Any questions or doubts, please contact your nearest official Rega dealer.

The tonearm external phono leads must be connected to

a suitable phono stage.

Connect as follows: Red=right channel. Black=left channel.

If your amplifier does not have an integrated phono stage

you will require an external stage.*

Connection to the amplifier

To set up the RB220 tonearm, screw on the balance

weight (A) along its shaft (B) until the stylus is floating

1mm clear of a record on the platter. Tracking force can

now be applied, half a turn of the weight (180 degrees) = 1

gram of force. Turn the weight to the suggested force of

your cartridge manufacturer’s guidelines. The suggested

force for the supplied Carbon cartridge is 2 grams (360

degrees). Use the plastic plugs on the weight as a guide.

Bias adjustment is automatic on the RB220 tonearm.

Setting up the RB220 tonearm

*Rega

Phono stages

are sold

separately.

**Upgrade

with the Rega

performance

pack.

3

Autres manuels pour P2

3

Ce manuel convient aux modèles suivants

1

Autres manuels Rega Platine

Manuels Platine populaires d'autres marques

Gemini

Gemini CDT-05 MKII Manuel utilisateur

Rotel

Rotel RP-820 Manuel utilisateur

Shuman

Shuman MC-250BT Manuel utilisateur

Stanton

Stanton STR8-150 Manuel utilisateur

Audio Technica

Audio Technica AT-LPW40WN Manuel utilisateur

Crosley

Crosley McQueen CR7011-GY Manuel utilisateur

Reloop

Reloop SMP-1 Manuel utilisateur

auna

auna TT-Classic Plus Manuel utilisateur

COMO AUDIO

COMO AUDIO Turntable Analog Manuel utilisateur

Dual

Dual 1009 F Manuel utilisateur

REED

REED Muse3C Manuel utilisateur

AXIOMTEK

AXIOMTEK OPS883-H Series Manuel utilisateur

Pioneer

Pioneer PL-71 Manuel utilisateur

Vestax

Vestax PDX-a1 Manuel utilisateur

Denon

Denon DP-400 Manuel utilisateur

Dual

Dual 504 Manuel utilisateur

Audio-Techica

Audio-Techica AT-LP60XBT Manuel utilisateur

Goldring

Goldring G99 Manuel utilisateur