REED R2300 Manuel utilisateur

R2300

Instruction

Manual

Infrared

Thermometer

1.888.610.7664info@REED-Direct.com REED-Direct.com

Table of Contents

Introduction ................................................................................................ 3

Product Quality........................................................................................... 3

Safety ......................................................................................................... 3

Features...................................................................................................... 4

Specications..........................................................................................4-5

Instrument Description ............................................................................... 5

Display Description .................................................................................... 6

Distance & Spot Size.................................................................................. 7

Operating Instructions...........................................................................8-10

Power ON and OFF................................................................................ 8

Turn Laser Indicator ON and OFF .......................................................... 8

Turn Display Backlight ON and OFF....................................................... 8

Display Maximum and Minimum Temperatures During Measurement... 8

Data Hold Measurement ........................................................................ 8

Entering Setting Mode ........................................................................... 9

Adjusting Emissivity ............................................................................... 9

Switching the Unit of Measure (°F/°C) ................................................... 9

Turning the Alarm Chime ON or OFF ..................................................... 9

Setting the High Temperature Alarm.................................................... 10

Setting the Low Temperature Alarm .................................................... 10

Appendix: Emissivity Chart .................................................................11-12

Fault Diagnostics...................................................................................... 13

Battery Replacement................................................................................ 13

Applications.............................................................................................. 14

Product Care ............................................................................................ 14

Product Warranty ..................................................................................... 14

Product Disposal and Recycling .............................................................. 15

Product Support....................................................................................... 15

1.888.610.7664info@REED-Direct.com REED-Direct.com

Introduction

Thank you for purchasing your REED R2300 Infrared Thermometer. Please

read the following instructions carefully before using your instrument. By

following the steps outlined in this manual your meter will provide years of

reliable service.

Product Quality

This product has been manufactured in an ISO9001 facility and has been

calibrated during the manufacturing process to meet stated product

specications. If a certicate of calibration is required please contact the

nearest authorized REED distributor or authorized Service Center. Please

note an additional fee for this service will apply.

Safety

• Neverattempttorepairormodifyyour

instrument. Dismantling your product,

other than for the purpose of replacing

batteries, may cause damage that will

not be covered under the manufac-

turer's warranty. Servicing should only be

provided by an authorized service center.

• Useextremecautionwhenthelaserbeamisturnedon.

• Donotletthebeamenteryoureye,anotherperson'seyeortheeyeof

an animal.

• Becarefulnottopointthebeamoffareectivesurfaceandstrikeyour

eye.

• Donotallowthelaserlightbeamtoimpingeonanygaswhichcan

explode.

1.888.610.7664info@REED-Direct.com REED-Direct.com

Features

• Built-inlaserpointeridentiestargetarea

• Userselectable°For°C

• 12:1distancetospotsizeratio

• Digitallyadjustableemissivity

• MaxandMinreadings

• Backlitdisplay

• Highandlowalarms

• Lowbatteryindicationandautoshutoff

Specifications

TemperatureRange: -25.6to752°F(-32to400°C)

Accuracy: ±4°F(2°C)or±2%rdg.

Resolution: 0.1°F(0.1°C)

OpticalResolution(D:S): 12:1

Spectral Response: 8 to 14µm

Emissivity: 0.1to1.0(Adjustable)

Response Time: 500ms

Backlit Display: Yes

DisplayHold: Yes

High/LowAlarms: Yes

AlarmIndicators: Yes(Beeping)

Max/Min: Yes

F/CSwitchable: Yes

LaserType: ClassII

LowBatteryIndicator: Yes

Power Supply: 9V battery

ProductCertications: CE,ETL,RoHS

BatteryLife: Approx.10hours(withcontinuoususe,

 backlighton)

continued...

1.888.610.7664info@REED-Direct.com REED-Direct.com

OperatingTemperature: 32to104°F(0to40°C)

StorageTemperature: -4to140°F(-20to60°C)

OperatingHumidityRange: <90%

MaximumOperatingAltitude: 6561'(2000m)

MaximumStorageAltitude: 39370'(12000m)

Dimensions: 6.0x4.3x1.6"(153x108x40mm)

Weight: 6.5oz(185g)

Instrument Description

1. LCDDisplay

2. Set Button

3. MAX/MIN/DOWN

Arrow Button

4. Backlight/LaserToggle/

UPArrowButton

SET MAX

MIN

5. LaserPointerBeam

6. IR Sensor

7. Trigger

8. Battery Cover

1.888.610.7664info@REED-Direct.com REED-Direct.com

Display Description

Emissivity

LaserON

TemperatureMeasurementActive

MeasurementDataHold

MaximumorMinimumValue

LowBattery

Backlight Indicator

UnitofMeasurement

HighandLowLimitAlarm

AlarmOn/Off

1.888.610.7664info@REED-Direct.com REED-Direct.com

Distance & Spot Size

1.888.610.7664info@REED-Direct.com REED-Direct.com

Operating Instructions

Power ON and OFF

1. Gentlypullthetriggertoturnthethermometeron.TheLCDdisplay

and white backlight will turn on.

2. The thermometer will automatically shut off after 9 seconds of

inactivity.

Turn Laser Indicator ON and OFF

To turn the laser on or off, press and hold the button for 3 seconds.

The icon will appear on the display indicating the laser is on. Press

and hold the button again for 3 seconds and the icon will disap-

pear on the display indicating the laser is now off.

Turn Display Backlight ON and OFF

To turn the display backlight on or off, press the button. The

icon will disappear on the display indicating the backlight is now off. Press

the button again and the icon will reappear on the display and

the backlight will turn on.

Display Maximum and Minimum Temperatures During

Measurement

Press the button to toggle between the maximum and minimum

temperaturemeasurementmodes.WhenthetriggerispulledinMAX

mode, the maximum temperature measurement will show on the display.

WhenthetriggerispulledinMINmode,theminimumtemperature

measurement will show on the display. To resume normal operation, press

and hold the button for 3 seconds.

Data Hold Measurement

Pull and hold the trigger after aiming at the target. The icon will

ash,indicatingthatthetargettemperatureisbeingmeasured.Whenthe

trigger is released, the icon will disappear and the icon will

appear indicating that measurement has stopped and the last measured

temperature will remain on-screen until another measurement is taken.

continued...

1.888.610.7664info@REED-Direct.com REED-Direct.com

Entering Setting Mode

Press the trigger and then the SET button to enter the setting mode.

In this mode, a user can choose the desired setting for emissivity, unit

ofmeasure,alarmchimetoggleandHighandLowAlarmvalueadjust-

ment. Once in the setting mode, press the SET button to toggle through

eachmode.Thecorrespondingiconwillashindicatinganadjustment

canbemadefortheselectedparameter.Oncethedesiredadjustments

have been made, press and hold the SET button for 3 seconds to resume

normal operation.

Adjusting Emissivity

WheninSettingMode,the willash,indicatingthevaluecanbe

adjusted.Press to increase the emissivity value by 0.01. Press and hold

the forquickervalueadjustment.Press to decrease the emissivity

value by 0.01. Press and hold the forquickervalueadjustment.Once

thedesiredadjustmentshavebeenmade,pressandholdtheSET button

for 3 seconds to resume normal operation.

Switching the Unit of Measure (°F/°C)

WheninSettingMode,presstheSET button until the or ash,

indicating the value can be modied. Press or to toggle between

Fahrenheit and Celsius. Once the desired unit of measure has been

selected, press and hold the SET button for 3 seconds to save the selec-

tion and resume normal operation.

Turning the Alarm Chime ON or OFF

WheninSettingMode,presstheSET button until the ashes,indi-

catingthehigh/lowalarmchimecanbeadjusted.Press or to turn the

alarmchimeONorOFF.WhenthechimeissettoONthe

will be displayed. When the chime is set to OFF the will be

displayed.Pleasenotethatwhenthechimeisoff,theMAXandMINalarm

icons will still appear on screen when an alarm is triggered. Once the

desired selection has been made, press and hold the SET button for 3

seconds to save the selection and resume normal operation.

continued...

1.888.610.7664info@REED-Direct.com REED-Direct.com

Setting the High Temperature Alarm

WheninSettingMode,presstheSETbuttonuntiltheHIGHiconashes,

indicating the value can be modied. Press to increase the tempera-

ture value. Press and hold the forquickervalueadjustment.Press

to decrease the temperature value. Press and hold the for quicker

valueadjustment.Oncethedesiredadjustmentshavebeenmade,press

and hold the SET button for 3 seconds to save the selected high alarm

temperature and resume normal operation.

Setting the Low Temperature Alarm

WheninSettingMode,presstheSETbuttonuntiltheLOWiconashes,

indicating the value can be modied. Press to increase the tempera-

ture value. Press and hold the forquickervalueadjustment.Press to

decrease the temperature value. Press and hold the for quicker value

adjustment.Oncethedesiredadjustmentshavebeenmade,pressand

hold the SET button for 3 seconds to save the selected low alarm temper-

ature and resume normal operation.

1.888.610.7664info@REED-Direct.com REED-Direct.com

Table des matières

Autres manuels REED Thermomètre

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur