REED IR-88 Manuel utilisateur
reedinstruments
www com
Model IR-88
Pocket-sized
Infrared Thermometer
Instruction
Manual
reedinstruments
www com
2
Table of Contents
Safety ......................................................................................................... 2
Features...................................................................................................... 2
Specications............................................................................................. 3
Instrument Description............................................................................... 4
Infrared Measurements ...........................................................................4-5
Displaying °F or °C ..................................................................................... 5
Battery Replacement.................................................................................. 6
Safety
Do not directly view or direct the laser pointer
towards an eye. Low power visible lasers do
not normally present a hazard, but may present
some potential for hazard if viewed directly
for extended periods of time.
Features
• An easy-to-use infrared thermometer and humidity meter
in one compact unit
• User selectable °F or °C
• Large, easy to read, backlit LCD with dual display
• Max and Hold function, Auto shut off
• Fixed 0.95 emissivity covers 90% of surface applications
• Includes battery and carrying case
For service on this or any other REED product or information on other
REED products, contact REED Instruments at info@reedinstruments.com.
630-670nm
reedinstruments
www com
3
Specifications
Display 3 ½ -digit (2000 count) LCD display
Measurement Range: Temperature: -4 to 518°F/-20 to 270°C
Power Off: Automatic shutoff after approx. 8 seconds
Laser Power: Laser power less than 1mW (red)
Operating Temperature: 32 to 122°F (0 to 50°C)
Operating Humidity: Max. 80% RH
Power Supply: 2 x AAA battery
Weight: 2.7 oz. / 76g
Size: 3.7 x 2 x 1” (94 x 51 x 25 mm)
Ranges/Resolution: -4 to 518°F/-20 to 270°C, 1°F/1°C
Accuracy: -4º to 518ºF/-20 to 270ºC:
± (2.5% of reading + 4ºF/2ºC)
Accuracy Notes: 1. Accuracy is given at 18ºC to 28ºC
(64ºF to 82ºF), less than 80% RH
2. Accuracy specied for emissivity of 0.95
Emissivity Settings: 0.95 xed
Distance Factor: Distance to Target Ratio 6:1
For service on this or any other REED product or information on other
REED products, contact REED Instruments at info@reedinstruments.com.
reedinstruments
www com
4
Instrument Desciption
1. IR sensor
2. Laser pointer beam
3. Measuring key
4. Laser key
5. MAX select key
6. LCD display
7. Battery
compartment
8. °C or °F select key
(you will need to
open the battery
compartment)
9. Hand Strap
Infrared Measurements
Taking Measurements
Point the meter toward the object being measured, then press and hold
the MEASURE button. The meter will turn ON and take a reading. Read
the measured temperature on the LCD. The meter turns off automatically
approximately 8 seconds after the MEASURE button is released.
Pressing the MAX button will hold the highest reading. The object being
measured should be larger than the spot size as illustrated in the "Dis-
tance to Target" graph below.
continued ...
Distance to Target
Laser Beam
Sensor Beam
reedinstruments
www com
5
Measurement considerations
If the surface of an object to be measured is covered with frost, dust or
other materials, surface cleaning must be performed before accurate
measurements can be made. High Reective Surfaces: If the surface of an
object to be measured is highly reective, apply masking tape or apply at
black paint to the surface since black paint has a xed emissivity value.
Displaying °F or °C
Open the battery compartment, move the slide switch located in the
opening beneath the outermost battery.
Battery Replacement
1. When the left corner of the LCD display shows LO BAT “ ”,
it indicates the battery output has weakened. Replacement of the
batteries is now needed.
2. Open the Battery Cover (#7 in gure on page 4) at the back of meter
and remove the battery.
3. Replace with AAA batteries and reinstall the cover.
For service on this or any other REED product or information on other
REED products, contact REED Instruments at info@reedinstruments.com.
reedinstruments
www com
6
Notes _________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
Table des matières
Autres manuels REED Thermomètre
REED
REED ST-610B Manuel utilisateur
REED
REED ST-130 Manuel utilisateur
REED
REED SD-947 Manuel utilisateur
REED
REED ST-610B Manuel utilisateur
REED
REED R2310 Manuel utilisateur
REED
REED R2002 Manuel utilisateur
REED
REED R2320 Manuel utilisateur
REED
REED R2222 Manuel utilisateur
REED
REED R2020 Manuel utilisateur
REED
REED ST-882 Manuel utilisateur
REED
REED R2400 Manuel utilisateur
REED
REED R2007 Manuel utilisateur
REED
REED R2005 Manuel utilisateur
REED
REED C-370 Manuel utilisateur
REED
REED ST-616CT Manuel utilisateur
REED
REED ST-8835 Manuel utilisateur
REED
REED ST-610B Manuel utilisateur
REED
REED SD-947 Manuel utilisateur
REED
REED R2002 Manuel utilisateur
REED
REED R2001 Manuel utilisateur
