RCA Hd52w59 Manuel utilisateur

FOR FACTORY

USE ONLY

CABLE

Off-air antenna for DIGITAL broadcasts

Regular cable outlet

Off-air antenna for

regular (ANALOG) broadcasts

Tip:

If you need help deciding what

type of antenna to use, go to

antennaweb.org. By entering

where you live, this mapping

program tells you what local

analog and digital stations are

available to you.

Quick Start , , Guide

Connecting Your HDTV

Find the back panel of your HDTV, and connect your antennas or

regular analog cable wall outlet.

Important:

Do not connect the ANTENNA

DIGITAL INPUT jack to a digital

cable signal.

The ﬁ rst time you turn on your TV, the Initial Setup screens appear automatically. This setup routine

guides you through the following steps to set up your HDTV:

• Set the Menu Language

• Complete Channel Search .

Note: Make sure you have signals connected to both the ANTENNA DIGITAL INPUT and the ANTENNA/CABLE

ANALOG INPUT jacks on your HDTV before you perform the channel search on both sources.

• Change the Channel List and Channel Labels

Note: Changing Lists and Labels can be time consuming. You can change these later through the Setup menu.

• Run the Automatic Convergence

Note: For best results, repeat the Auto Convergence function (from the Setup menu) once the HDTV’s been running

for an hour. You can access Auto Convergence in the Setup menu (see the User’s Manual for more information).

Setting Up Your TV

Watching TV...

Now you’re ready to watch TV! Your TV has two tuners: one for analog TV channels and one for off-air digital channels.

To see which tuner you’re on: look at the channel number that appears in the bottom left corner of your screen when

you change channels—a ‘D’ appears next to the channel number on the digital tuner, while an ‘A’ appears next to the

channel number on the analog tuner.

To switch between the tuners: press the ANT•CAB or ANTENNA button on your remote.

To tune directly to a regular channel: enter the channel number and press OK.

Digital channels can have both primary channels (like the analog channel number) and subchannels. These subchannels might

offer programming that’s different from the primary channel. NOTE: Not all digital channels offer subchannels.

To tune directly to a digital subchannel: make sure you’re on the digital tuner; then, enter the primary channel number,

press the right arrow button, enter the subchannel number, and press OK.

TOCOM 16556340

Note: This back panel illustration is for representation

only. Your back panel might be different.

continues inside...

16556340.indd 1 3/29/05 15:59:43

FOR FACTORY

USE ONL

CONNECTS TO

DEVICES WITH DVI-HDTV

OUTPUT JACKS

HD Receivers

Satellite Receivers

Cable Boxes

DVI-HDTV INPUT*

(Best connection)

* - not intended for computer connections

CONNECTS TO

DEVICES WITH AUDIO INPUTS...

A/V Receivers

Subwoofers

...OR DEVICES WITH

AUDIO/VIDEO INPUTS

VCRs

A/V Receivers

AUDIO / VIDEO OUTPUTS

CONNECTS TO

DEVICES WITH COMPOSITE

VIDEO / S-VIDEO OUTPUT JACKS

VCRs

DVD Players

Satellite Receivers

Cable Boxes

COMPOSITE INPUTS

(Good connections)

CONNECTS TO

DEVICES WITH Y•Pr•Pb

OUTPUT JACKS

DVD Players

DVD-PVRs

DVD Recorders

Satellite Receivers

Cable Boxes

COMPONENT INPUT

(Excellent connections)

Important:

For more detailed instructions,

refer to Chapter 1 of the User’s

Manual.

Connecting Your HDTV (continued from previous page)

Use the other input and output jacks to connect the rest of your home entertainment

devices to the HDTV. Use the jacks that offer the best connection for each device.

Your HDTV also has front panel input jacks for easy access.

Turning On Your TV

A. Plug in the TV.

Locate power cord for TV. Plug ﬂ at end into power jack on TV. Plug

other end into wall outlet.

B. Put Batteries in the Remote.

Insert 2 batteries by matching the polarities to the inside of the remote.

C. Turn on the TV.

Press the TV button on your remote to turn on the TV. (You can also press

the Power button on the front panel of the TV.)

While the TV is warming up, look at the remote to ﬁ nd the arrow and

OK buttons, which you’ll be using during the assisted setup.

Important Information

About Your Remote

Control

Your remote control is

universal—it can control many

different kinds of devices. See

Chapter 2 of the User’s Manual

for programming instructions.

You can also program your

HDTV to automatically tune to

the A/V input you’re using for

each device when you press

that device’s button. See the

Autotuning section in Chapter

3 of the User’s Manual for more

information.

Some remotes have

arrows that look like this:

Other remotes have

arrows that look like this:

Note: This back panel illustration is for representation only. Your back panel might be different.

16556340.indd 2 3/29/05 15:59:57

FOR FACTORY

USE ONL

CONNECTS TO

DEVICES WITH DVI-HDTV

OUTPUT JACKS

HD Receivers

Satellite Receivers

Cable Boxes

DVI-HDTV INPUT*

(Best connection)

* - not intended for computer connections

CONNECTS TO

DEVICES WITH AUDIO INPUTS...

A/V Receivers

Subwoofers

...OR DEVICES WITH

AUDIO/VIDEO INPUTS

VCRs

A/V Receivers

AUDIO / VIDEO OUTPUTS

CONNECTS TO

DEVICES WITH COMPOSITE

VIDEO / S-VIDEO OUTPUT JACKS

VCRs

DVD Players

Satellite Receivers

Cable Boxes

COMPOSITE INPUTS

(Good connections)

CONNECTS TO

DEVICES WITH Y•Pr•Pb

OUTPUT JACKS

DVD Players

DVD-PVRs

DVD Recorders

Satellite Receivers

Cable Boxes

COMPONENT INPUT

(Excellent connections)

Important:

For more detailed instructions,

refer to Chapter 1 of the User’s

Manual.

Connecting Your HDTV (continued from previous page)

Use the other input and output jacks to connect the rest of your home entertainment

devices to the HDTV. Use the jacks that offer the best connection for each device.

Your HDTV also has front panel input jacks for easy access.

Turning On Your TV

A. Plug in the TV.

Locate power cord for TV. Plug ﬂ at end into power jack on TV. Plug

other end into wall outlet.

B. Put Batteries in the Remote.

Insert 2 batteries by matching the polarities to the inside of the remote.

C. Turn on the TV.

Press the TV button on your remote to turn on the TV. (You can also press

the Power button on the front panel of the TV.)

While the TV is warming up, look at the remote to ﬁ nd the arrow and

OK buttons, which you’ll be using during the assisted setup.

Important Information

About Your Remote

Control

Your remote control is

universal—it can control many

different kinds of devices. See

Chapter 2 of the User’s Manual

for programming instructions.

You can also program your

HDTV to automatically tune to

the A/V input you’re using for

each device when you press

that device’s button. See the

Autotuning section in Chapter

3 of the User’s Manual for more

information.

Some remotes have

arrows that look like this:

Other remotes have

arrows that look like this:

Note: This back panel illustration is for representation only. Your back panel might be different.

16556340.indd 2 3/29/05 15:59:57

FOR FACTORY

USE ONLY

CABLE

Off-air antenna for DIGITAL broadcasts

Regular cable outlet

Off-air antenna for

regular (ANALOG) broadcasts

Tip:

If you need help deciding what

type of antenna to use, go to

antennaweb.org. By entering

where you live, this mapping

program tells you what local

analog and digital stations are

available to you.

Quick Start , , Guide

Connecting Your HDTV

Find the back panel of your HDTV, and connect your antennas or

regular analog cable wall outlet.

Important:

Do not connect the ANTENNA

DIGITAL INPUT jack to a digital

cable signal.

The ﬁ rst time you turn on your TV, the Initial Setup screens appear automatically. This setup routine

guides you through the following steps to set up your HDTV:

• Set the Menu Language

• Complete Channel Search .

Note: Make sure you have signals connected to both the ANTENNA DIGITAL INPUT and the ANTENNA/CABLE

ANALOG INPUT jacks on your HDTV before you perform the channel search on both sources.

• Change the Channel List and Channel Labels

Note: Changing Lists and Labels can be time consuming. You can change these later through the Setup menu.

• Run the Automatic Convergence

Note: For best results, repeat the Auto Convergence function (from the Setup menu) once the HDTV’s been running

for an hour. You can access Auto Convergence in the Setup menu (see the User’s Manual for more information).

Setting Up Your TV

Watching TV...

Now you’re ready to watch TV! Your TV has two tuners: one for analog TV channels and one for off-air digital channels.

To see which tuner you’re on: look at the channel number that appears in the bottom left corner of your screen when

you change channels—a ‘D’ appears next to the channel number on the digital tuner, while an ‘A’ appears next to the

channel number on the analog tuner.

To switch between the tuners: press the ANT•CAB or ANTENNA button on your remote.

To tune directly to a regular channel: enter the channel number and press OK.

Digital channels can have both primary channels (like the analog channel number) and subchannels. These subchannels might

offer programming that’s different from the primary channel. NOTE: Not all digital channels offer subchannels.

To tune directly to a digital subchannel: make sure you’re on the digital tuner; then, enter the primary channel number,

press the right arrow button, enter the subchannel number, and press OK.

TOCOM 16556340

Note: This back panel illustration is for representation

only. Your back panel might be different.

continues inside...

16556340.indd 1 3/29/05 15:59:43

Autres manuels pour hd52w59

Table des matières

Autres manuels RCA TV

RCA

RCA 27V550 Manuel utilisateur

RCA

RCA 32V550T Manuel utilisateur

RCA

RCA 27R410TYX1 Manuel utilisateur

RCA

RCA F25442 Manuel utilisateur

RCA

RCA 15956220 Manuel utilisateur

RCA

RCA F32685 Manuel utilisateur

RCA

RCA E13335 Manuel utilisateur

RCA

RCA F27242GY Manuel utilisateur

RCA

RCA Victor CTC9A Instructions d'installation

RCA

RCA F27632 Manuel utilisateur

RCA

RCA G32710 Manuel utilisateur

RCA

RCA 14F400T Manuel utilisateur

RCA

RCA color tv Manuel utilisateur

RCA

RCA DTV306 Manuel utilisateur

RCA

RCA MM36100 Manuel utilisateur

RCA

RCA RLDED5078A Manuel utilisateur

RCA

RCA RT2412-C Manuel utilisateur

RCA

RCA SCENIUM D52W131YX1 Manuel utilisateur

RCA

RCA RLD5515A Manuel utilisateur

RCA

RCA 27F520T - 27" TruFlat Picture Tube TV Guide de démarrage rapide

RCA

RCA E13309 Manuel utilisateur

RCA

RCA F27350 Manuel utilisateur

RCA

RCA TF 2920 Manuel utilisateur

RCA

RCA F20632 Mode d’emploi

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur

RCA hd52w59 Manuel utilisateur

Manuels TV populaires d'autres marques