RCA E09310 Manuel utilisateur

USER'S

GUIDE

CO kO RTV

Important Information

WARNING

Toreduce the risk of fire or shock

hazard, do not expose this TV to rain

ormoisture.

TO REDUCE THE RISK OF ELF_.CrRICSHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

A This symbolindicates _Thissymbolindicates

"dangc0rousvoltage"inside _k importantinsu'uctions

theproductthatpresentsa accompanyingthe

riskof electricshockor product.

peno iny=y.

Cautions

CAUTION:

To reduce the risk of electric shock, match wide blade of plug to

wide slot, fiflly insert.

Refer to the identification/rating label on the back of this productfor the proper operat-

ing voltage.

FCC Regulations state thatunauthofizod changes ormodifications to this equipment

may void the user's authority to operate iL

Note To Cable TV Installer This reminderisprovidedtocall yourattention to Article 820-40 of the National

Electrical Code (Section 54 of the CanadianElectricalCode, Part 1) whichprovides

guidelines for proper grounding and,in particular,specifies thatthe cable ground shall

be connected to the grounding system of the building as close to the point of cable entry

as practical.

Product

Registration

Please fill out the productregistration card andreturn it immediately. Returning this

allows us to contact you ff needed.

Keep your sales receipt to obtain warrantyparts and service andfor proof of

purchase. Attach it here and record the serial andmodel numbersin case you ever

need them. The numbers are located on the back of the TV.

Model No

Serial No

PurchaseDate:

Denier/Address/Phone

Introduction

Thank you for choosing RCA

Your television is designed for long

life and superior operation. Despite its

sophistication, your new TV is

amazingly simple to operate because it

has so many automatic features.

Table of Contents

Getting Started

First-Time Operation .................................................................. 2-3

Controlling Your TV

Front Panel and Headphone Jack ................................................... 4

On-Screen Displays...................................................................... 5

Remote Operation .......................................................................... 6

Operating Features

VIDEO Menu ................................................................................. 7

SETUP Menu ................................................................................. 8

Languages (English, French, Spanish) .......................................... 8

Sleep Timer Operation ................................................................... 9

Alarm Timer Operation ............................................................... 10

Autoprogramming Channel Memory .......................................... 11

Editing Channel Memory ............................................................. 11

Connecting Your TV

Antenna/Cable Information ......................................................... 12

Dipole Antenna Connection ......................................................... 12

FM Radio Operation ..................................................................... 13

Home Antenna Connections ........................................................ 14

CabIe-TV Connections ................................................................ 15

Cable-TV Operation .................................................................... 16

Mounting Your TV .................................................................. 17-19

Caring for Your TV

Cleaning &Care " 20

Accessories

Accessories .................................................................................. 21

Order Form ............................................................................. 21-22

Trouble Checks ......................................................................... 23

Limited Warranty ....................................................................24

Getting Started

First-T'nneOperation

The steps below will help you get your TV connected and working quickly.

Page numbers are also listed for more details.

1. Unpack TV and accessories.

Shown below are the accessories that

came packed with your TV.

A a l_ter

Replaceadapteronly

stock #193983.

2. Place batteries in remote.

rl. Tm'nthe remote control face down.

2. Press down on the ridged area of the

battery cover and slide it off.

e e

I[(( ]K >P

®®®

RemoteContloland

Two Batteries

DipoleAntenna

3. Place two "AAA" batteries as shown

matching the + and - end of each

battery in the compartment.

4. Replace the cover.

(uneercotm_ titan9 Han_n)

Om_Brac_ +

ffwoReck) omMoun_Gulds('r_)

Fwe Hex Nuts

@@@

Five Washers

Rfteen PhillipsScrews:

Rye 1",_mv_

Rye 2" Scmv4

Five 3",Screws

l:_fteen_ac:ers:

i"_acers

_0 1/2" Spacers

I/4"Spacers

3. Connect antenna or cable-TV

system.

Most antenna or cable-TV systems can

be connected as shown here.

Ba_of

"IV

Ineom_ P_tl_ _)m Antemm m

Cal_e-ws_lmm_

Details for connecting ahome antenna

to your TV areon page 14.

Details for connecting a cable-TV

system to your TV areon pages 15-16.

4. Plug in the TV.

Plug in the TV, matching the wide and

small blade of the plug with the outlet.

Getting Started

First-Time Operation

5. Turn on TV and place channels

in memory.

Your TV is designed to place active

channels into your TV's memory the first

time you nun it on.

®®®

• Press POWER on the TV orremote to

turn on the TV.

• The TV automatically cyclesthrough all

channel numbers and places active

channels into the channel memory.

When your TV is finished, it tunes to

the lowest channel numberin its

channel memory.

6. Edit the channd memory.

You canaddand erase channels from

memory as desired.

•Press MENU repeatedly to highlight

SETUP. Then press •to select the

SETUP menu.

•Press MENU repeatedly to highlight

EDIT CHANNELS.

i_ss MENU

tqgledly to

see 2nd setup

INl_ln.

•Press • to select EDIT CHANNELS.

•Select the desired channel numberby

pressing the CHAN up ordown button

orby pressing two number buttons.

7. Set the dock.

• Press MENU repeazed/y until SETUP is

highlighted. Then press •to select the

SETUP menu.

•Repeatedly press MENU to

select CLOCK.

• Press andhold _1to set the correct

hour. Thenpress and hold •to set the

correctminutes.

•Press CLEARto remove the menu from

the screen.

•Then press •to add achannel, or press

•to erase a channel. Details are on

page 11.

•Press CLEARto remove the menu from

the screen.

Controlling Your TV

Front Panel and Headphone Jack

Shown here are the front-panel buttons.

f h

*oooO0000000000000000

::::_oooooooooooo

o0ooo000oo00

*°°eooooooooo00000000

*°°cO0000000000000000

:::°O0000000000000000

"0.:_00000000000000

*Ooo0._0°°00000000000

_00000000

; I

0 (.866

I I

Remote Sensor

• When using the remote control, point it toward this sensor.

MENU Button

•Press repeatedly until the item you want is highlighted, then

press • or ,q to enter the menu.

•Press repeatedly tomove down each menu screen and then

press •or • to adjust each setting.

•To mute the TV, press once and then press •.

CHAN • and •Buttons (Channel Up and Down)

•Press Channel up to see the next higher channel in memory.

• Press Channel down to see the next lower channel in memory.

•You can add or erase channels in memory as desired. Detai/s

are on page 11.

VOL Buttons (Volume Up and Down)

(Also • and 4 Buttons)

• Press VOL •to increase volume, orpress VOL • to

decrease volume.

• Press • or • to adjust the setting of an item that is highlighted

in the menu.

• The volume display will automatically appear onthe screen

when you press the VOL buttons.

POWER Button

*Press to turnthe TV on or off.

(t_) Headphone Jack (Located on Back of TV)

• You can plug an optional set of headphones into this jack for

private listening. When headphones are attached, the sound

comes through the headphones insteadof the TV speaker.

•If the plug on your headphones does not fitthe jack, adapters

are available atyour local electronics supply store.

Controlling Your TV

On-Screen Displays

(_) Sleq

(_) Alarm Timer

QChannd Number

(_ MT.r/'E

QSleep T'nner

This display appears when the sleep timerhas been set.

Details are on page 9.

(_ Time

This disphy appears afterthe clock is set whenever you

change channels or press DISPLAY..

QAlarm Thner

This display appears when the alarm timer has been set.

Details are on page 10.

QChannd Number

display appears whenever you change channels or

press DISPLAY.

QUYE

This display appears when the TV's sound is muted. Press

MUTE on the remote. Details are on page 6.

(_ FM Radio

This display ap1_ars whenever you change stations or press

DISPLAY while in the FM radio mode. Details are on

page 13.

Controlling Your TV

Remote Operation

When operating the remote, point it

directly at the front of the TV, Objects

between the remote and the remote

sensor can block the signal to the TAr.

POWER Button

• Press totnm the TV on oroff.

PREV CH Button (Previous Channel)

• Pressing this button switches the TV

back to the last tuned channel. This is

useful if you want towatch two channels.

• Select the first channel you wish to

watch. Then select the otherchannel by

pressing two number buttons.

• The TV changes back and forthbetween

the two channels each time you press

this button.

DISPLAY Button

•Press to display the time andchannel

number on the screen.

•Press to see ff the Sleep Timer and/or

Alarm Tnner is set.

•Press to quickly remove menus from

the screen.

MUTE Button

• Press to quickly reduce sound to

minimum level.

• To restore sound and normal picture,

press MUTE again or press VOL up.

CHAN •1• Buttons (Channel Up

and Down)

•Press to select the next higher or lower

channel in memory.

•You canaddor erasechannels in

memory as desired. Details are on

page 11.

VOL Buttons (Volume Up and Down)

•Press VOL •to increase volume, or

press VOL •to decrease volume.

•Press •or • to adjust the setting of an

item thatis highlighted in amenu.

• The volume display appearson the

screen when you press the VOL buttons.

MENU Button

• Press repeatedly until the item you want

is highfighted, then press • or • to enter

the menu.

•Press repeatedly to move down each

menu screen and then press • or • to

adjust each setting.

RESET Button

• Press toreturn allvideo settings (color,

tint, contrast, brightness, and sharpness)

back to the original settings.

CLEAR Button

• Press to clear the screen of all on-screen

displays except MUTE.

Number Buttons (0-9)

•Press to access any channel number.

• To select achannel, press two number

buttons. For example, press 0 then 6 for

channel 6.

•To select a3-digit number, press and hold

number button 1 until 1- appears on the

screen. Then press the other two numbers.

Operating Features --

VIDEO Menu

Press MENU until VIDEO is highlighted. Then press • to select the

VIDEO menu. Press MENU to move down the menu and • and • to

adjust each function.

MENU to

select

VIDEO

Press•

forlst

VIDEO

Screen

The VIDEO RESET function changes all the video functions (color, tint,

contrast, brightness, sharpness) back to the factory settings. Press • or •

to resetthe video functions. RF_ETappears on the TV screen momen=

tarily while the functions arebeing adjusted.

Press

untilthe

second

VIDEO

appears

The COLOR function adjusts the amount of color in the picture. Press •or

• to select COLOR, then press •to increase or press < to decrease color.

The T/NT function adjusts the color of flesh tones. Press • or •to select

.T/NZ. Press •to add more green tint or press < to addmore red tint.

The CONTRAST function adjusts the overall brightness and contrast of

the picture. Press • or • to select CONTRASZ. Press • to increase or

press •to decrease contrast.

The BRIGHTNF__ function adjusts the brightness of the darkportions

of the picture. Press • or • toselect BRIGHTNESS. Press •to

:increase or press •to decrease brightness.

The SHARPNESS function adjusts picture sharpness. Press • or •to

select SHARPNESS. Press • to increase orpress • todecrease.

These functions are displayed individually atthe bottom of the screen

once they have been selected. The setting can be adjusted at thattime

by pressing either the • or • button.

Operating Features

SETUP Menu

Press MENU until SETUP is highlighted. Then press _ to select the

SETUP menu. Press MENU to move down the menu and •and •to

adjust each f_mction.

1st

SETUP

Sa_en

By setting the Sleep function, you programyour TV to turnitself off after a

certain period of time. This is useful whenever you want to watch "IVfor an

houror so before going to deep. Press the •or •button toselect the length

[of time you want the TV to stay on. Details are onpage 9.

You can program your TV to turn itself on at a specific time by setting the

A/ARM lime function and turning theALARM: ON/OFF function ON.

Details are on page 10.

The ALARM: ON/OFF function lets you nun the alarm on or offby pressing

the •or • button. Details are on page 10.

After setting the CLOCK function, the time is displayed on the"IVscreen

whenever you change channelsor press DISPLAY. Press andhold •to set

the correcthours and •to set the correct minutes. Details are onpage 3.

Press

mm'lthe

second•

SETUP

appears

When you press •or• tostart the AUTOPROGRAM function, the TV

cycles through all channels andplaces only the active channels for your area

in its channel memory. The channel memory is the list of channels the TV

stops on when you press CHAN up or down. Derails are onpage I1.

The ED/T CHANNE/_ function allows you to edit the channel memory by

adding orerasing channels. Details are on page 11.

_TheANTENNA: CABI£/AIR function tells your TV whether you have cable

ora home antenna connected to iL The "IVadjusts this function for you

when you startthe AUTOPROGRAM function. If you wish to adjust it

manually, press •or •to switch between the CABLE and A/R setting.

Languages

The on-screen displays in this TV can

be displayed in three languages:

English, French, and Spanish. When

you select a language, most of the

displays will be shown on the screen

in your preferred language.

Selecting a Language

1. Press MENU once to bring up the

main menu and highlight ENGLISH.

2. Press •or •to select FRANCAI$

(French), ESPANOL (Spanish),

orENGLISH.

FRANCAIS

Table des matières

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur