RCA C29400 Manuel utilisateur

USER’S

GUIDE

C29400

M29400

C O L O R T V

It is important to read this manual before

operating this unit for the first time.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates

“dangerous voltage” inside

the product that presents a

risk of electric shock or

personal injury.

This symbol indicates

important instructions

accompanying the

product.

Important Information

WARNING

To reduce the risk of fire or

shock hazard, do not expose

this TV to rain or moisture.

Refer to the identification/rating label located on the back panel of your

product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user’s authority to operate it.

If fixed (non-moving) images are left on the screen for long periods, they

may be permanently imprinted on the screen. Such images include network

logos, phone numbers, and video games. This damage is not covered by

your warranty. Extended viewing of channels displaying these images

should be avoided.

Cable TV Installer: This reminder is provided to call your attention to

Article 820-40 of the National Electrical Code which provides guidelines for

proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point of

cable entry as practical.

Table of Contents

Important Information Warning _____________________________________________________________________ i

Quick Guide to Your TV Startup ____________________________________________________________________ 2-3

Hook up, Plug in TV, Put Batteries in the Remote,

Turn on the TV, Place Channels into Memory, Set the Time

Basic Tour of the Remote ____________________________________________ 4

Basic Button Layout and Functions

Menu Basics ______________________________________________________________ 5

Colors, Menu Buttons, Moving through the Menus

Using Your TV and Remote With Remote Buttons ______________________________________________ 6-7

With VCRs ____________________________________________________________ 8-10

With a Satellite Receiver ___________________________________________ 11

With a Cable Box _________________________________________________ 12-13

With a Laserdisc Player ____________________________________________ 14

With Audio Equipment ____________________________________________ 15

Adjusting Your TV Overall Picture _________________________________________________________ 16

Picture Settings ________________________________________________________ 17

Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset

Sound Settings ____________________________________________________ 18-19

Stereo, Expanded Stereo, SAP, Tone, Speakers

Using Advanced Features Placing Channels in Memory/Autoprogram ____________ 20

Adding and Deleting Channels in Memory ________________21

Naming the Channels ______________________________________________ 22

Setting the Sleep Timer _____________________________________________ 23

Setting the Alarm Clock ___________________________________________ 24

Selecting a Language _______________________________________________ 25

Watching Closed Captioning ____________________________________ 26

Setting Your TV for Antenna or Cable _______________________ 27

References Front Panel Buttons __________________________________________________ 30

Displays on the Screen _____________________________________________ 31

Trouble Checks ____________________________________________________ 32-33

Quick Guide to Your TV

Startup

For Model M29400:

Plug the cord into the outlet,

matching the wide and the small

end of the plug with the outlet.

2. Plug in the TV

1. Hook up your TV

Details are in the Connections

Guide.

Hook up any antennas, cables or

other equipment to your TV before

you follow the steps below.

The steps below will get your TV connected and ready for watching.

For more details, see the page numbers listed.

3. Put Batteries in the Remote A. Pull off the cover of the battery

compartment.

B. Place the batteries, matching

the +and –end of each battery

in the compartment.

C. Replace the cover.

For Model C29400:

A. Plug cord into adapter as shown at

the left.

B. Plug the adapter into the outlet,

matching the prongs with the outlet.

CAUTION: Choose the location for your TV carefully. Take precautions that the stand or other furniture on

which the TV is placed is properly located (see Important Safeguards sheet) and of adequate size and

strength to prevent the TV from accidentally being tipped over, pushed off, or pulled off. This could cause

damage to the TV and/or personal injury.

Quick Guide to Your TV

Startup

A. Press MENU•PROG until the

Alarm menu is selected. This

menu is green.

B. The Clock is automatically

highlighted the first time you

set it. If it is not, press MOVE H

(down) to highlight it.

C. Press MOVE Fto set the hour.

D. Press MOVE Eto set the

minutes.

A. Press MENU•PROG until the

Setup menu is selected. This

menu is white.

B. Press MOVE Eto start placing

channels in the TV’s memory.

C. Wait until TV has cycled through

all the channels and returns to

original channel.

6. Set the Time

5. Place all available

channels in memory

(Autoprogram)

Details for adding and deleting

channels are on page 21.

Press TV on the remote.

Press POWER on the TV.

4.Turn on the TV

12:21 AM 13

Controls Alarm Adjust Setup

Alarm: Off

Alarm Channel: 07

On Time: Disabled

Off Time: Disabled

Clock: Use –/+ to set time.

Controls Alarm Adjust Setup

English Français Español

Autoprogram

Label: 13 Clear

Channel Memory: 13 Stored

Cable/Air: Cable

Quick Guide to Your TV

Basic Tour of the Remote

Turns the TV on.

Sets the remote to control the TV.

Operates TV when remote is set to

control the TV.

Operates the TV and advanced

features.

TV Power Button

Volume and Channel Controls

Details are on page 6.

Basic information about your remote is shown below. This will give you a

general idea of how your remote works. For more details, see pages 6–15.

Controls components such as a

VCR, laserdisc player, audio

equipment, satellite receiver and a

cable box.

Changes the menus and features

on the screen.

Component Buttons

Details are on pages 8–15.

Menu Buttons

See next page for details.

Yellow

Quick Guide to Your TV

Menu Basics

Colors

Menu Buttons

These buttons are used with the

TV’s menus to adjust the features.

You can use the menu buttons on

the remote or the front of the TV.

Press MENU•PROG repeatedly to

see each of the four menu colors.

Each menu has a different color

background as shown at the left.

Green Light

Blue White

General information about using the on-screen menu system is shown

below. Details on using the remote buttons are on pages 6-7. Many menu items

are explained in detail in Using the Advanced Features starting on page 20.

Moving through the Menus

Controls Alarm Adjust Setup

English Français Español

Autoprogram

Label: 13 Clear

Channel Memory: 13 Stored

Cable/Air: Cable

Controls Alarm Adjust Setup

English Français Español

Autoprogram

Label: 13 Clear

Channel Memory: 13 Stored

Cable/Air: Cable

1. Press MENU•PROG on the

remote or MENU on the front

panel to move from menu to

menu.

2. Press MOVE or on the

remote or CHANNEL up/down

on the front panel to move up

and down through the features

in the menu.

3. Press MOVE Fand Eon the

remote or VOLUME + or –on

the front panel to move left and

right on the menu lines.

Using Your TV and Remote

With Remote Buttons

POWER

Turns off the TV.

Turns off compatible VCRs.

Turns on a component after a

component button is pressed.

AUDIO, VCR, VCR2•LD,

SAT•CABLE, TV

Sets the remote to control the

component. VCR2•LD can only be

programmed for one component:

either a VCR or a Laserdisc Player.

See Using the Remote with a VCR,

Cable Box, Laserdisc Player and Audio

equipment on pages 8–15.

Turns on the TV.

Shows the displays on the screen.

Sets the remote to control the TV.

See Using the Remote with a VCR,

Cable Box, Laserdisc Player and Audio

equipment on pages 8–15.

REW (Rewind)

Rewinds a tape or laserdisc.

Searches backward while tape or

laserdisc is playing.

PLAY

Plays tape or laserdisc.

FF (Fast Forward)

Fast forwards a tape or laserdisc.

Searches forward while tape or

laserdisc is playing.

REC (Record)

Starts recording onto tape.

STOP

Stops tape or laserdisc.

PAUSE

Pauses tape or laserdisc.

DISPLAY

Shows displays on the screen.

Clears menus from the screen.

SKIP (Commercial Skip)

Allows you to scan other chan-

nels during commercials.

Each press adds 30 seconds. TV

switches back to original channel

when time runs out. Press

CLEAR to cancel SKIP.

CHAN and

(Channel up and down)

Scans up and down through

channels in the TV’s memory.

Moves through channels

in VCR’s memory.

VOL < and >

(Volume down and up)

Raises and lowers sound.

MUTE

Switches the TV sound on or off.

PREV CH (Previous Channel)

Changes back and forth between

two channels.

Select a channel and then select

another. Press PREV CH to

switch between the two channels.

Using Your TV and Remote

With Remote Buttons

Number Buttons (0-9)

Selects any channel number.

Two numbers must be pressed for

each channel. Press 0 and 6 for

channel 6. For three digit chan-

nels, press and hold 1 until 1--

appears on the screen. Then press

the other two numbers.

INPUT

Switches between the TV channels

and

Video 00.

ANTENNA (ANT A•B)

Used as TV/VCR button when

remote is set to control the VCR.

CLEAR

Clears menus and displays from

the screen.

Clears items from VCR timer

programs and VCR’s clock.

MENU•PROG (Program)

Shows menus on the screen and

moves from menu to menu.

Sets VCR clock and programs

timer on VCR.

RESET

Returns the picture adjustments to

the original settings.

MOVE Fand E(left and right)

Moves left and right on a menu

line. See Menu Basics on page 5.

Changes a feature setting.

MOVE G and H(up and down)

Moves up and down menus. See

Menu Basics on page 5.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels RCA TV

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur