Raymarine ST40 Depth Instrument Guide de l'utilisateur

ST40 Depth

Instrument

Owner’s

Handbook

Document number: 81158-3

Date: March 2006

81158_3.book Page 1 Tuesday, March 28, 2006 10:33 AM

Raymarine, ST40 and SeaTalk are trademarks of Raymarine UK Ltd

81158_3.book Page 2 Tuesday, March 28, 2006 10:33 AM

Preface i

Important information

Safety notices

WARNING: Product installation & operation

This equipment must be installed and operated in accordance

with the Raymarine instructions provided. Failure to do so could

result in personal injury, damage to your boat and/or poor product

performance.

WARNING: Electrical safety

Make sure you have switched off the power supply before you

start installing this product.

WARNING: Navigation aid

Although we have designed this product to be accurate and

reliable, many factors can affect its performance. Therefore, it

should serve only as an aid to navigation and should never replace

commonsense and navigational judgement. Always maintain a

permanent watch so you can respond to situations as they

develop.

EMC conformance

All Raymarine equipment and accessories are designed to the best industry

standards for use in the recreational marine environment.

The design and manufacture of Raymarine equipment and accessories conform to

the appropriate Electromagnetic Compatibility (EMC) standards, but correct

installation is required to ensure that performance is not compromised.

Waste from Electrical and Electronic Equipment

(WEEE) Directive

The Waste from Electrical and Electronic Equipment (WEEE) Directive requires the

recycling of waste electrical and electronic equipment. Whilst the WEEE Directive

does not apply to some of Raymarine’s products, we support its policy and ask you

to be aware of how to dispose of this product.

The crossed out wheelie bin symbol, illustrated above, and found on our products

signifies that this product should not be disposed of in general waste or landfill.

Please contact your local dealer, national distributor or Raymarine Technical

Services for information on product disposal.

81158_3.book Page i Tuesday, March 28, 2006 10:33 AM

ii ST40 Depth Instrument Owner’s Handbook

Handbook information

To the best of our knowledge, the information in this handbook was correct when

it went to press. However, Raymarine cannot accept liability for any inaccuracies

or omissions it may contain.

In addition, our policy of continuous product improvement may change

specifications without notice. Therefore, Raymarine cannot accept liability for any

differences between the product and the handbook.

81158_3.book Page ii Tuesday, March 28, 2006 10:33 AM

Preface iii

Contents

Important information .......................................................... i

WARNING ......................................................................... i

EMC conformance ............................................................. i

Handbook information ....................................................... i

Preface..................................................................................... v

Parts supplied ................................................................... vi

Chapter 1: Operation ............................................................. 1

1.1 Operating procedures .................................................. 1

Silencing alarms .......................................................... 1

Adjusting display backlighting and contrast ............... 4

1.2 Alarms ......................................................................... 5

Alarm indications ........................................................ 5

Shallow alarm ........................................................ 5

Deep alarm ............................................................. 5

Anchor alarms ........................................................ 5

Enabling/disabling alarms ........................................... 6

Chapter 2: Maintenance and Fault Finding ........................ 7

2.1 Maintenance ................................................................ 7

Servicing and safety .................................................... 7

Instrument .................................................................... 8

Transducer ................................................................... 8

Cabling ........................................................................ 8

2.2 Fault finding ................................................................ 8

Preliminary procedures ............................................... 8

Fixing faults ................................................................. 8

Assistance .................................................................. 10

158_2pre.p65 01/05/01, 13:553

iv ST40 Depth Instrument Owner’s Handbook

Chapter 3: Installation......................................................... 11

3.1 Planning your installation ......................................... 11

EMC installation guidelines ...................................... 11

Suppression Ferrites ........................................... 12

Connections to Other Equipment ......................... 12

Tools required ........................................................... 12

Site requirements ....................................................... 13

Transducer ........................................................... 13

Instrument ............................................................ 15

3.2 Procedures................................................................. 16

Fitting transducer ....................................................... 16

Running transducer cable .................................... 16

Connections to the instrument ................................... 17

SeaTalk connections ............................................ 18

Fitting the instrument................................................. 19

Desktop Mounting Bracket .................................. 21

3.3 Calibration requirement ............................................ 22

Chapter 4: Calibration ......................................................... 23

4.1 Introduction ............................................................... 23

EMC conformance .................................................... 23

4.2 User calibration ......................................................... 23

Depth offsets ............................................................. 24

4.3 Intermediate calibration ............................................ 26

4.4 Dealer calibration ...................................................... 26

Instrument Specification .................................................... 29

Glossary ................................................................................. 31

Index ...................................................................................... 33

158_2pre.p65 01/05/01, 13:554

Preface v

Preface

Thank you for purchasing a Raymarine product. We are sure your

ST40 instrument will give you many years of trouble-free operation.

This instrument is designed to provide reliable performance, even

under the most demanding conditions.

D4637-2

158_2pre.p65 01/05/01, 13:555

vi ST40 Depth Instrument Owner’s Handbook

Parts supplied

D4665-2

ST40

Depth

Instrument

Owner's

Handbook

Worldwide

Distributors

ST40 Depth instrument

Fixing

stud

Thumb

nut

Gasket

Depth transducer

Supplied with bung

(not illustrated)

1 m (3 ft) power cable

Instrument Cover

Owner’s Handbook.

Warranty document and fitting

templates included in Handbook

Worldwide Service Centre

Handbook.

Quick Reference Guide

Clamping bracket

DEPTH

ST40

Note:

The items shown here are supplied for an ST40 Depth system. If an instrument is purchased separately, a transducer

is not included. If any item is not present, contact your Raymarine Dealer.

With Set alarm level screen displayed,

to save the alarm level and return to

normal operation.

and keys simultaneously

press the

Adjusting display backlighting/contrast

Normal operation

ST40 Depth Instrument - quick reference guide

SWITCH ON

Depth

Minimum

depth

Shallow

alarm

Deep

alarm

Deep

anchor

alarm

Offset

Shallow

anchor

alarm

Notes:

*denotes temporary screens which will

time-out to the previous permanent

screen after 5 seconds.

On repeater instruments, only the

Depth and Minimum depth

screens are available.

3 seconds

Alarm on/off

3 seconds

Alarm on/off

Set

alarm

level

3 seconds

Alarm on/off

3 seconds

Alarm on/off

orTo exit adjust mode press or wait for 5 second timeout

LEVEL 1 LEVEL 1

OFF LEVEL 2LEVEL 3LEVEL 2

To enter adjust mode,press for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST

158_2pre.p65 01/05/01, 13:566

Chapter 1: Operation 1

Chapter 1: Operation

Your ST40 Depth instrument:

• Provides depth information, in either feet (FT), metres (M) or

fathoms (FA), as set during User calibration (see Chapter 4,

Calibration).

• Records the minimum depth encountered during the period it is

switched on. You can reset this at any time.

• Enables you to define alarm thresholds for shallow water, deep

water, shallow anchor and deep anchor.

• Enables you to see what offset is applied to the depth reading.

CAUTION

Your instrument is calibrated to factory (default) settings when

first supplied and must therefore be calibrated before use, to

ensure optimum performance on your vessel. Do NOT use the

instrument until the calibration procedures have been

satisfactorily completed, using the procedures in Chapter 4,

Calibration.

Coloured bezel and Desktop Mounting Bracket options are available

for your ST40 instrument. Contact your Raymarine dealer for further

information.

1.1 Operating procedures

Operating information is presented in flow chart form. The flow charts

show the various operating screens and key presses necessary to carry

out the various instrument functions. Key presses are momentary unless

otherwise stated.

Note that:

• Up/down depth-trend arrows are displayed, if the seabed is rising or

falling at a significant rate.

• The minimum depth reading is reset to zero at power up.

Silencing alarms

To silence an alarm (see the Alarms section, later in this chapter),

momentarily press any one of the instrument keys.

158_2c01.p65 01/05/01, 13:561

2 ST40 Depth Instrument Owner’s Handbook

NORMAL OPERATION (sheet 1)

Depth

Minimum

depth

Shallow

alarm

D4658-2

Notes:

Screens other than the Depth screen, are

temporary and will time-out to the Depth

screen after 5 seconds.

Switch on

3 seconds

To reset

3 seconds

Alarm

on/off

To/from Shallow anchor alarm screen

(sheet 2)

Deep

alarm

Set Shallow alarm

threshold

Set Deep alarm

threshold

3 seconds

Alarm

on/off

Increase

Decrease

Increase

Decrease

To/from the Offset

screen (sheet 2)

This diagram shows the operating sequence for

an ST40 Depth master instrument. On a repeater

instrument, only the Depth and Minimum

depth screens are available.

If the Shallow alarm has been locked during User calibration,

you cannot switch it on or off or change the threshold value.

With any set alarm screen displayed, press the

to save the alarm level and return to

normal operation.

and keys simultaneously

Momentary

158_2c01.p65 01/05/01, 13:562

Table des matières

Autres manuels Raymarine Moniteur

Raymarine

Raymarine St290 Manuel utilisateur

Raymarine

Raymarine ALPHA Manuel utilisateur

Raymarine

Raymarine C-Series Manuel utilisateur

Raymarine

Raymarine i70 Manuel utilisateur

Raymarine

Raymarine T210 Manuel utilisateur

Raymarine

Raymarine M1500 Guide de l'utilisateur

Raymarine

Raymarine C140w Manuel utilisateur

Raymarine

Raymarine AXIOM XL 16 Manuel utilisateur

Raymarine

Raymarine St290 Manuel utilisateur

Raymarine

Raymarine eS Series Manuel utilisateur

Raymarine

Raymarine St290 Manuel utilisateur

Raymarine

Raymarine gS Series Manuel utilisateur

Raymarine

Raymarine ALPHA Manuel utilisateur

Raymarine

Raymarine i70 Manuel utilisateur

Raymarine

Raymarine AXIOM Series Manuel utilisateur

Raymarine

Raymarine A65 Manuel utilisateur

Raymarine

Raymarine A Series A50 Manuel utilisateur

Raymarine

Raymarine mn100 Manuel utilisateur

Raymarine

Raymarine LIGHTHOUSE 4 Manuel utilisateur

Raymarine

Raymarine ST70 Instrument Instructions de montage

Raymarine

Raymarine ST40 Guide de l'utilisateur

Raymarine

Raymarine Raytheon R21 Series Manuel utilisateur

Raymarine

Raymarine E140 Manuel utilisateur

Raymarine

Raymarine G170 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation