Chapter 1 Basic Information
4 RAYLASE IPG Interface Board MN027 / v1.1.0
1 BASIC INFORMATION
The RAYLASE IPG interface board is used to control a pulsed IPG laser in combination with
RAYLASE control cards SP-ICE, RLC-PCI or RLC-USB.
Features
Interface to Ytterbium pulsed IPG Fiber Lasers according to interface types B, B1, B2, D
D-SUB 25 connector for 1:1 connection to pulsed IPG laser
Detection, if 24V power is attached. Soft start to switch on the laser.
Optically isolated control signals
Detection of laser error conditions
Reset of laser after detection of laser error either by push-button or software
Support of integrated visible pointer
Emergency Stop input for immediate shut off of laser output
1.1 Delivery Scope
IPG interface board
Connecting cable between IPG interface board and control card
Laser adaptor
Hardware manual
1.2 Warranty
The rights of the customer in respect of any defects in quality or deficiencies in title are gov-
erned by the general conditions of business of RAYLASE AG. These conditions are available
for review on our website.
Before returning the product, please request an authorization number from RAYLASE. Pack
the product in the original packaging or in packaging that provides equivalent protection for
shipping.
RAYLASE shall not be obliged to repair defects under the following circumstances:
If persons not authorized by RAYLASE have attempted to repair the product.
If persons not authorized by RAYLASE have modified the product.
If the product has been used improperly.
If the product has been connected to incompatible devices.
If the product has been damaged because of inadmissible high laser power or focusing the
laser on optical areas.
If the product has been damaged because of unqualified cleaning of the optical areas.
Note: No implicit guarantee or warranty of suitability for specific purposes has been made.
RAYLASE is not responsible for damages arising from use of the product. Individual assem-
blies or other assemblies manufactured by RAYLASE may be subject to separate warranty
conditions. Refer to the corresponding manuals for further information.
