Raycus RFL-P100MX Instructions d'installation

版本号

密级

内部

会签

阶段

标记

RFL-P100MX

100MX 激光器英文说明书

RFL-P100MX·JS02

部门脉冲激光器技术研究部

编写胡晓蕾 20210315

校对李莎20210316

审核李科20210322

标审李其军 20210322

批准黄保20210322

武汉锐科光纤激光技术股份有限公司

谢良

夏巨江

刘红

帅维文

旧底图登记号

底图登记号

User

Instruction

RFL-P100MX

Wuhan Raycus Fiber Laser Technologies CO., Ltd.

2021

@2020 Raycus Corporation

Safety Information

Please read this instruction carefully and familiarize yourself with the information we have

provided before you use the product. In this brochure, important operation procedures, safety and

other information are provided for you and all future users. In order to ensure operating safely

and optimal performance of the product, please act according to following warnings, cautions

and other information.

a) Raycus pulsed fiber laser is classified as a high power Class IV laser device. Before

supplying the power to the device, please make sure that the correct voltage of 24V DC

is connected and the anode and cathode are right. Incorrect polarity or voltage will

harm severely the device.



b) The device emits invisible light with a wavelength from





1060nm to





1085nm

with average power of 100W. Do not expose your eyes or skin to the radiation of the

laser.

c) Do not take apart the device, because there are no replaceable accessories available for

users to use. Any maintenance can only be proceeded in Raycus.

d) Do not look into the light output end directly. Use appropriate laser safety eye-wear(i.e.

laser goggles) when operating the device.

Safety labels and locations

Figure 1 Warning Signs

The two labels above in Figure 1 are located on the top of the cover of the device, representing

laser radicalization.

@2021 Raycus Corporation

Content

1. Description...................................................................................................................1

1.1. Product description...................................................................................................................1

1.2. Actual configuration list...........................................................................................................1

1.3. Environmental requirements and cautions...............................................................................1

1.4. Specifications ...........................................................................................................................2

2. Mounting .....................................................................................................................4

2.1. Mounting dimensions...............................................................................................................4

2.2. Method of installation ..............................................................................................................4

3. Control Interface ........................................................................................................6

4. Operation Regulations....................................................................................................................12

4.1. Pre-inspection.........................................................................................................................12

4.2. Operation procedures .............................................................................................................12

4.3. Cautions..................................................................................................................................12

5. Instructions for warranty, return and maintenance.............................................13

5.1. General warranty....................................................................................................................13

5.2. Limitations of warranty..........................................................................................................13

5.3. Service and repairs .................................................................................................................13

@2021 Raycus Corporation

1. Description

1.1. Product description

Raycus pulsed lasers are specially developed for high-speed and efficient laser marking

systems. For industrial laser marking machine and other applications provide an ideal high-power

laser energy source.

Compared with traditional laser，pulsed laser can increase the conversion efficiency of

pump light per watt by more than 10 times. Automatic design for high-volume consumption,

suitable for laboratory or outdoor operation, compact, can be placed independent, can be used at

any time, can be directly embedded on the user’s device.

The device can emit 1060~1085nm wavelength pulsed light under the control of industrial

laser’s standard interface driven by 24V DC power source.

1.2. Actual configuration list

Please refer to the included list according to Table 1.

Table 1 Configuration list

Items

Quantity

Fiber Laser module

Factory inspection report

1.3. Environmental requirements and cautions

Pulsed laser should be driven by 24V DC±1V power source.

a) Caution: Make sure the corresponding wires of the device are properly grounded.

b) All the maintenance to the device should only be done by Raycus, because there is no

replacement or accessory provided with the device. Please do not try to damage the

labels or open the cover in order to prevent against electric shock, or the warranty will

be invalid.

c) The output head of the product is connected with an optical cable. Please be careful

handling the output head. Avoid dirt and any other contamination. Please use the

specialized lens paper when cleaning the lens. Please lid the laser with protective cover

of the light isolator to be against dirt only when the laser is not installed in the device or

not in working.

d) If the operating the device fails to follow this instruction, the protective function will be

weakened. Therefore, it should be used under normal conditions.

e) Do not install the collimating device into the output head when the laser device is in

working.

@2021 Raycus Corporation

f) The device has four cooling fans at the rear panel to dissipate heat. In order to

guarantee enough airflow to help giving heat off, there must be a space of at least 10

cm’s width for airflow in front and rear side of the device. As the cooling fans are

working at blow condition, if laser is mounted in a cabinet with fans, the direction

should be same as laser’s fans.

g) Do not look into the output head of the device directly. Please do wear appropriate laser

safety eyewear during operation of the device.

h) The longest time without pulse is only 100



. If there is no pulse output, please stop

marking at once to avoid the further damage of the device.

i) Power source sudden interruption will do great harm to the laser device. Please make

sure the power supply works continuously.

1.4. Specifications

Table 2 P100MX pulsed fiber laser specifications

NO.

Characteristic

Test condition

Min

Typ.

Max.

Unit

Mode of operation

Pulsed

Polarization

Random

Maximum pulse energy

350ns/66kHz/100W

1.5

Nominal average output power

100

103

105

Pulse duration

Subject to Table 3

350

Output power adjustment

range

100

Long-term average power

instability

Pulse repetition rate

Subject to Table 3

2000

kHz

Central emission wavelength

FWHM

1059

1064

1069

Emission bandwidth

FWHM

Beam quality M2

350ns/66kHz/100W

1.3

1.6

Output beam diameter

350ns/66kHz/100W

Laser switching ON time

0-100% power

100

μs

Laser switching OFF time

100-10% power

μs

Output fiber cable length

Supply voltage

VDC

Guide Laser Power

0.2

0.5

Anti Strong Back Reflection

Yes

Cooling

Forced Air Cooled

Operating Temperature

℃

@2021 Raycus Corporation

Table 2 （contined）

Table 3 Pulse repetition rate PRR and maximum pulse energy EPules,max for different pulse

duration



NO.



[ns]

PRRmin[kHz]

PPRRmin [W]

PRR0[kHz]

PPRR0 [W]

PRRmax[kHz]

Pmax[W]

0.1-4W

1000

100-105W

2000

100-105W

0.2-4W

500

100-105W

2000

100-105W

0.3-4W

330

100-105W

1000

100-105W

0.5-4W

200

100-105W

1000

100-105W

100

0.8-4W

125

100-105W

1000

100-105W

200

1.25-4W

100-105W

500

100-105W

250

1.4-4W

100-105W

500

100-105W

350

1.5-4W

100-105W

400

100-105W

100

1.5-4W

100-105W

500

100-105W

Storage Temperature

-20

℃

Humidity

Power Consumption

450

Laser module dimensions

W×D×H

350×320×120

@2021 Raycus Corporation

2. Mounting

2.1. Mounting dimensions

a) Dimension drawing

Figure 2 Dimension drawing of laser module (Unit: mm).

b) Dimension drawing of output isolator

Figure 3 Dimension drawing of output isolator (Unit: mm).

*The output head of the isolator is subject to the final factory product.

2.2. Method of installation

a) Fix the module stable to the bracket and keep the laser in good ventilation.

b) Connect the power line to 24V DC power and ensure enough DC output power. Keep it

clear to the polarity of the electric current: Anode-brown, Cathode-blue, PE-yellow and

green.

@2021 Raycus Corporation

Figure 4 Definition of power line wires

c) Make sure that the interface of the external controller matches the laser and the control

cable is well connected to the laser’s interface. The recommended electrical connection

is shown in Figure 5.

Figure 5 Wiring diagram of recommended electrial connection and power supply

d) The bending radius of the delivery fiber should not exceed 15 cm.

@2021 Raycus Corporation

3. Control Interface

There are DB9 and DB25 interfaces at the rear of the laser. The DB9 is a RS232 interface

only used for debugging, no needs to connect. And DB25 is the joint interface connecting control

system to the laser system, please make sure the connection is reliable before operation. Feet of

the DB25 are defined as follows in Table 4.

Figure 6 Pin definition of DB25 control interface

Table 4 Definition of connect ports of controller

Pin No.

Name

Description

1-8 (D0-D7)

Power Setting

8 bit Parallel port;

D0 is minimum bit and D7 is maximum bit;

Range: 0-255 (hexadecimal: 0X00-0XFF).

10,14

Ground

Digital GND.

11,12,16,21

Laser alarms status

see alarm codes in Table 5.

VCC

+5VDC power supply input.

Providing power for inside isolate chip of DB25 to

ensure that the input and output signal are valid.

Emission Enable (EE) signal.

HIGH(>4.5V): Emission Enable

LOW or disconnected (<1V): Emission Disable

Emission Modulation (EM) input.

HIGH (>4.5V): Emission ON

LOW or disconnected (<1V): Emission OFF

Sync

Pulse Repetition Rate (Synchronization) input, square

wave.

Emergency Off

Emergency Switch Off(Enable: 5V TTL)

Obligate Pin

Reserved

a) The pump current of the diode laser and the laser output power are controlled by setting

the value of Pin1-Pin8 (TTL level). Pin1-Pin8 can be set from 0 to 255，corresponding

to the laser output power from 0 to 100％(the actual laser power may not be strictly

linear with the setting value). The relationship between Pin value and output power is

shown in Table 5.

b) Pin 10 and Pin 14are all digital GND.

Table des matières

Autres manuels Raycus Instrument de mesure

Raycus

Raycus RFL-C4000S-CE Manuel utilisateur

Raycus

Raycus RFL-QCW150/1500 Manuel utilisateur

Raycus

Raycus RFL-P120MX Instructions d'installation

Raycus

Raycus ABP Series Manuel utilisateur

Raycus

Raycus RFL-C3300X Manuel utilisateur

Raycus

Raycus RFL-P200S+ Instructions d'installation

Raycus

Raycus RFL-P100M Manuel utilisateur

Raycus

Raycus RFL-C6000S-CE Manuel utilisateur

Raycus

Raycus RFL-P30MX Instructions d'installation

Raycus

Raycus RFL-P20QB Manuel utilisateur

Raycus

Raycus RFL-C Series Manuel utilisateur

Raycus

Raycus XZ Series Manuel utilisateur

Raycus

Raycus RFL-C15000TZ Manuel utilisateur

Raycus

Raycus RFL-A2000D Manuel utilisateur

Raycus

Raycus RFL-P20MB Manuel utilisateur

Raycus

Raycus RFL-B500D Manuel utilisateur

Raycus

Raycus RFL-DDL Series Manuel utilisateur

Raycus

Raycus RFL-C1000 Manuel utilisateur

Raycus

Raycus RFL-P60QB Instructions d'installation

Raycus

Raycus RFL-P200 Manuel utilisateur

Raycus

Raycus RFL-C20000M-CE Manuel utilisateur

Raycus

Raycus RFL-A200D Manuel utilisateur

Raycus

Raycus RFL-FDDL100X Manuel utilisateur

Raycus

Raycus RFL-P20MX Instructions d'installation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur