R&S NRT2 Manuel utilisateur

R&S®NRT2

Power Reflection Meter

Getting Started

1430057302

Version 03

(>N5×2)

This document describes the following R&S®NRT2 models and options:

●R&S®NRT2 (1430.0509K02)

●R&S®NRT2-B8 (1430.0105K02)

Mühldorfstr. 15, 81671 München, Germany

Phone: +49 89 41 29 - 0

Email: [email protected]

Internet: www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1430.0573.02 | Version 03 | R&S®NRT2

Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.

R&S®NRT2 is indicated as R&S NRT2.

Contents

R&S®NRT2

3Getting Started 1430.0573.02 ─ 03

Contents

1 Safety and Regulatory Information...................................... 5

1.1 Safety Instructions................................................................................5

1.2 Labels on the Product.......................................................................... 8

1.3 Warning Messages in the Documentation..........................................8

1.4 Korea Certification Class B..................................................................9

2 Documentation Overview....................................................10

2.1 Getting Started Manual.......................................................................10

2.2 User Manual.........................................................................................10

2.3 Tutorials............................................................................................... 10

2.4 Instrument Security Procedures....................................................... 10

2.5 Printed Safety Instructions................................................................ 11

2.6 Data Sheets and Brochures............................................................... 11

2.7 Release Notes and Open Source Acknowledgment (OSA).............11

3 Key Features........................................................................ 12

4 Preparing for Use.................................................................13

4.1 Lifting and Carrying............................................................................13

4.2 Unpacking and Checking................................................................... 13

4.3 Choosing the Operating Site............................................................. 14

4.4 Setting Up the Product....................................................................... 14

4.4.1 Placing the Product on a Bench Top.....................................................14

4.4.2 Mounting the Product in a Rack............................................................16

4.5 Considerations for Test Setup...........................................................16

4.6 Connecting to Power.......................................................................... 17

4.7 Connecting Power Sensors............................................................... 18

Contents

R&S®NRT2

4Getting Started 1430.0573.02 ─ 03

4.7.1 NRT Sensor Connector.........................................................................18

4.7.2 USB 2.0 Host Interfaces....................................................................... 19

4.8 Connecting USB and External Devices............................................ 20

4.9 Switching On or Off............................................................................ 20

5 Instrument Tour................................................................... 22

5.1 Front Panel Tour..................................................................................22

5.1.1 NRT Sensor.......................................................................................... 22

5.1.2 Touchscreen..........................................................................................23

5.1.3 Keys...................................................................................................... 23

5.1.4 USB Host Interface............................................................................... 25

5.1.5 On/Standby Key....................................................................................25

5.2 Rear Panel Tour...................................................................................26

5.2.1 Trig In / Out 2 and Out 1 / Trig Out Connectors.................................... 26

5.2.2 Ethernet Interface................................................................................. 27

5.2.3 USB Device Interface............................................................................27

5.2.4 USB Host Interface............................................................................... 27

5.2.5 AC Supply and Power Switch............................................................... 27

5.2.6 IEC 625/IEEE 488 Interface..................................................................27

5.2.7 Name Plate........................................................................................... 28

6 Contacting Customer Support........................................... 29

Index..................................................................................... 30

Safety and Regulatory Information

R&S®NRT2

5Getting Started 1430.0573.02 ─ 03

1 Safety and Regulatory Information

The product documentation helps you use the product safely and efficiently. Fol-

low the instructions provided here and in the Chapter 1.1, "Safety Instructions",

on page 5.

Intended use

Combined with a supported R&S NRT‑Zxx directional power sensor, the R&S

NRT2 base unit is intended for power and reflection measurements in develop-

ment and for monitoring and maintenance purposes. The supported

R&S NRT‑Zxx directional power sensors are listed in the data sheet. Observe the

operating conditions and performance limits stated in the data sheet.

Target audience

The target audience is developers and technicians. The required skills and expe-

rience in power and reflection measurements depend on the used operating con-

cept. While manual operation is suitable for beginners, remote control requires

expertise in power and reflection measurements.

Main applications are continuous monitoring of transmitter systems and power

measurements with digital modulation. A profound knowledge of the intended

application and test setup is recommended.

Where do I find safety information?

Safety information is part of the product documentation. It warns you of potential

dangers and gives instructions on how to prevent personal injury or damage

caused by dangerous situations. Safety information is provided as follows:

●In Chapter 1.1, "Safety Instructions", on page 5. The same information is

provided in many languages as printed "Safety Instructions". The printed

"Safety Instructions" are delivered with the product.

●Throughout the documentation, safety instructions are provided when you

need to take care during setup or operation.

1.1 Safety Instructions

Products from the Rohde & Schwarz group of companies are manufactured

according to the highest technical standards. To use the products safely, follow

Safety Instructions

Safety and Regulatory Information

R&S®NRT2

6Getting Started 1430.0573.02 ─ 03

the instructions provided here and in the product documentation. Keep the prod-

uct documentation nearby and offer it to other users.

Use the product only for its intended use and within its performance limits. Inten-

ded use and limits are described in the product documentation such as the data

sheet, manuals and the printed "Safety Instructions". If you are unsure about the

appropriate use, contact Rohde & Schwarz customer service.

Using the product requires specialists or specially trained personnel. These users

also need sound knowledge of at least one of the languages in which the user

interfaces and the product documentation are available.

Never open the casing of the product. Only service personnel authorized by

Rohde & Schwarz are allowed to repair the product. If any part of the product is

damaged or broken, stop using the product. Contact Rohde & Schwarz customer

service at http://www.customersupport.rohde-schwarz.com.

Lifting and carrying the product

The maximum weight of the product is provided in the data sheet. To move the

product safely, you can use lifting or transporting equipment such as lift trucks

and forklifts. Follow the instructions provided by the equipment manufacturer.

Choosing the operating site

Only use the product indoors. The product casing is not waterproof. Water that

enters can electrically connect the casing with live parts, which can lead to elec-

tric shock, serious personal injury or death if you touch the casing. If

Rohde & Schwarz provides accessories designed for your product, e.g. a carrying

bag, you can use the product outdoors.

Unless otherwise specified, you can operate the product up to an altitude of

2000 m above sea level. The product is suitable for pollution degree 2 environ-

ments where nonconductive contamination can occur. For more information on

environmental conditions such as ambient temperature and humidity, see the

data sheet.

Setting up the product

Always place the product on a stable, flat and level surface with the bottom of the

product facing down. If the product is designed for different positions, secure the

product so that it cannot fall over.

Safety Instructions

Safety and Regulatory Information

R&S®NRT2

7Getting Started 1430.0573.02 ─ 03

If the product has foldable feet, always fold the feet completely in or out to ensure

stability. The feet can collapse if they are not folded out completely or if the prod-

uct is moved without lifting it. The foldable feet are designed to carry the weight of

the product, but not an extra load.

If stacking is possible, keep in mind that a stack of products can fall over and

cause injury.

If you mount products in a rack, ensure that the rack has sufficient load capacity

and stability. Observe the specifications of the rack manufacturer. Always install

the products from the bottom shelf to the top shelf so that the rack stands

securely. Secure the product so that it cannot fall off the rack.

Connecting to power

The product is an overvoltage category II product. Connect the product to a fixed

installation used to supply energy-consuming equipment such as household

appliances and similar loads. Keep in mind that electrically powered products

have risks, such as electric shock, fire, personal injury or even death.

Take the following measures for your safety:

●Before switching on the product, ensure that the voltage and frequency indica-

ted on the product match the available power source. If the power adapter

does not adjust automatically, set the correct value and check the rating of the

fuse.

●Only use the power cable delivered with the product. It complies with country-

specific safety requirements. Only insert the plug into an outlet with protective

conductor terminal.

●Only use intact cables and route them carefully so that they cannot be dam-

aged. Check the power cables regularly to ensure that they are undamaged.

Also ensure that nobody can trip over loose cables.

●If the product needs an external power supply, use the power supply that is

delivered with the product or that is recommended in the product documenta-

tion or a power supply that conforms to the country-specific regulations.

●Only connect the product to a power source with a fuse protection of maxi-

mum 20 A.

●Ensure that you can disconnect the product from the power source at any

time. Pull the power plug to disconnect the product. The power plug must be

easily accessible. If the product is integrated into a system that does not meet

these requirements, provide an easily accessible circuit breaker at the system

level.

Safety Instructions

Safety and Regulatory Information

R&S®NRT2

8Getting Started 1430.0573.02 ─ 03

Cleaning the product

Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that

the casing is not waterproof. Do not use liquid cleaning agents.

Meaning of safety labels

Safety labels on the product warn against potential hazards.

Potential hazard

Read the product documentation to avoid personal injury or product damage.

Electrical hazard

Indicates live parts. Risk of electric shock, fire, personal injury or even death.

Hot surface

Do not touch. Risk of skin burns. Risk of fire.

Protective conductor terminal

Connect this terminal to a grounded external conductor or to protective ground. This

connection protects you against electric shock if an electric problem occurs.

1.2 Labels on the Product

Labels on the casing inform about:

●Personal safety, see "Meaning of safety labels" on page 8

●Environment safety, see Table 1-1

●Identification of the product, see Chapter 5.2.7, "Name Plate", on page 28.

Table 1-1: Labels regarding environment safety

Labeling in line with EN 50419 for disposal of electrical and electronic equipment after

the product has come to the end of its service life.

For more information, see the product user manual, chapter "Disposal".

1.3 Warning Messages in the Documentation

A warning message points out a risk or danger that you need to be aware of. The

signal word indicates the severity of the safety hazard and how likely it will occur

if you do not follow the safety precautions.

Warning Messages in the Documentation

Safety and Regulatory Information

R&S®NRT2

9Getting Started 1430.0573.02 ─ 03

WARNING

Potentially hazardous situation. Could result in death or serious injury if not avoi-

ded.

CAUTION

Potentially hazardous situation. Could result in minor or moderate injury if not

avoided.

NOTICE

Potential risks of damage. Could result in damage to the supported product or to

other property.

1.4 Korea Certification Class B

이 기기는 가정용(B급) 전자파 적합기기로서 주로 가정에서 사용하는 것을 목적으

로 하며, 모든 지역에서 사용할 수 있습니다.

Korea Certification Class B

Documentation Overview

R&S®NRT2

10Getting Started 1430.0573.02 ─ 03

2 Documentation Overview

This section provides an overview of the R&S NRT2 user documentation. Unless

specified otherwise, you find the documents on the R&S NRT2 product page at:

www.rohde-schwarz.com/manual/NRT2

2.1 Getting Started Manual

Introduces the R&S NRT2 and describes how to set up and start working with the

product. A printed version is delivered with the instrument.

2.2 User Manual

Contains the description of all instrument modes and functions. It also provides

an introduction to remote control, a complete description of the remote control

commands with programming examples, and information on maintenance, instru-

ment interfaces and error messages. Includes the contents of the getting started

manual .

The user manual is provided on the R&S NRT2 for download under:

[System] > "Instrument Info" > "Help & Copyrights"

2.3 Tutorials

Tutorials offer guided examples and demonstrations on operating the R&S NRT2.

They are provided on the product page of the internet.

2.4 Instrument Security Procedures

Deals with security issues when working with the R&S NRT2 in secure areas. It is

available for download on the Internet.

Instrument Security Procedures

Autres manuels pour NRT2

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur