Quectel FC905A Manuel utilisateur

FC905A

User Manual

Wi-Fi&Bluetooth Module Series

Version: 1.0.1

Date: 2022-08-05

Status: Preliminary

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 1 / 51

At Quectel, our aim is to provide timely and comprehensive services to our customers. If you

require any assistance, please contact our headquarters:

Quectel Wireless Solutions Co., Ltd.

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai

200233, China

Tel: +86 21 5108 6236

Email: [email protected]

Or our local offices. For more information, please visit:

http://www.quectel.com/support/sales.htm.

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm.

Or email us at: [email protected].

Legal Notices

We offer information as a service to you. The provided information is based on your requirements and we

make every effort to ensure its quality. You agree that you are responsible for using independent analysis

and evaluation in designing intended products, and we provide reference designs for illustrative purposes

only. Before using any hardware, software or service guided by this document, please read this notice

carefully. Even though we employ commercially reasonable efforts to provide the best possible

experience, you hereby acknowledge and agree that this document and related services hereunder are

provided to you on an “as available” basis. We may revise or restate this document from time to time at

our sole discretion without any prior notice to you.

Our and third-party products hereunder may contain copyrighted material. Such copyrighted material

shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior

written consent. We and the third party have exclusive rights over copyrighted material. No license shall

be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid

ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal

non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for

noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of

the material.

Trademarks

Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights

to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel

or any third party in advertising, publicity, or other aspects.

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 2 / 51

Third-Party Rights

This document may refer to hardware, software and/or documentation owned by one or more third parties

(“third-party materials”). Use of such third-party materials shall be governed by all restrictions and

obligations applicable thereto.

We make no warranty or representation, either express or implied, regarding the third-party materials,

including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular

purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any

third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein

constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell,

offer for sale, or otherwise maintain production of any our products or any other hardware, software,

device, tool, information, or product. We moreover disclaim any and all warranties arising from the course

of dealing or usage of trade.

To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers,

including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the

relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the

purpose of performing the service only or as permitted by applicable laws. Before data interaction with

third parties, please be informed of their privacy and data security policy.

Disclaimer

a) We acknowledge no liability for any injury or damage arising from the reliance upon the information.

b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the

information contained herein.

c) While we have made every effort to ensure that the functions and features under development are

free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless

otherwise provided by valid agreement, we make no warranties of any kind, either implied or express,

and exclude all liability for any loss or damage suffered in connection with the use of features and

functions under development, to the maximum extent permitted by law, regardless of whether such

loss or damage may have been foreseeable.

d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of

information, advertising, commercial offers, products, services, and materials on third-party websites

and third-party resources.

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 3 / 51

Safety Information

The following safety precautions must be observed during all phases of operation, such as usage, service

or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal

should notify users and operating personnel of the following safety information by incorporating these

guidelines into all manuals of the product. Otherwise, Quectel assumes no liability for customers’ failure to

comply with these precautions.

Full attention must be given to driving at all times in order to reduce the risk of an

accident. Using a mobile while driving (even with a handsfree kit) causes

distraction and can lead to an accident. Please comply with laws and regulations

restricting the use of wireless devices while driving.

Switch off the cellular terminal or mobile before boarding an aircraft. The operation

of wireless appliances in an aircraft is forbidden to prevent interference with

communication systems. If there is an Airplane Mode, it should be enabled prior to

boarding an aircraft. Please consult the airline staff for more restrictions on the use

of wireless devices on an aircraft.

Wireless devices may cause interference on sensitive medical equipment, so

please be aware of the restrictions on the use of wireless devices when in

hospitals, clinics or other healthcare facilities.

Cellular terminals or mobiles operating over radio signal and cellular network

cannot be guaranteed to connect in certain conditions, such as when the mobile bill

is unpaid or the (U)SIM card is invalid. When emergency help is needed in such

conditions, use emergency call if the device supports it. In order to make or receive

a call, the cellular terminal or mobile must be switched on in a service area with

adequate cellular signal strength. In an emergency, the device with emergency call

function cannot be used as the only contact method considering network

connection cannot be guaranteed under all circumstances.

The cellular terminal or mobile contains a transceiver. When it is ON, it receives

and transmits radio frequency signals. RF interference can occur if it is used close

to TV sets, radios, computers or other electric equipment.

In locations with explosive or potentially explosive atmospheres, obey all posted

signs and turn off wireless devices such as mobile phone or other cellular

terminals. Areas with explosive or potentially explosive atmospheres include

fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities,

and areas where the air contains chemicals or particles such as grain, dust or

metal powders.

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 4 / 51

Contents

Safety Information....................................................................................................................................3

Contents....................................................................................................................................................4

Table Index ...............................................................................................................................................6

Figure Index..............................................................................................................................................7

1Introduction.......................................................................................................................................8

1.1. Special Marks.........................................................................................................................12

2Product Overview............................................................................................................................13

2.1. General Description................................................................................................................13

2.2. Key Features..........................................................................................................................13

2.3. EVB........................................................................................................................................15

3Application Interfaces.....................................................................................................................16

3.1. General Description................................................................................................................16

3.2. Pin Assignment ......................................................................................................................17

3.3. Pin Description .......................................................................................................................18

3.4. Power Supply.........................................................................................................................20

3.4.1. Power Supply Pins Introduction...................................................................................20

3.4.2. Buck Circuit Pins Introduction......................................................................................21

3.5. WLAN Application Interface....................................................................................................22

3.5.1. SDIO Interface.............................................................................................................22

3.5.2. WLAN_EN...................................................................................................................24

3.5.3. WLAN_WAKE .............................................................................................................24

3.6. Bluetooth Application Interface...............................................................................................24

3.6.1. UART Interface............................................................................................................25

3.6.2. BT_EN.........................................................................................................................26

3.6.3. BT_WAKE_HOST and HOST_WAKE_BT ..................................................................26

3.6.4. PCM Interface .............................................................................................................27

3.7. Other Interfaces......................................................................................................................28

3.7.1. WLAN_SLP_CLK........................................................................................................28

3.7.2. XTAL_IN/OUT.............................................................................................................29

3.7.3. SDIO_VSEL ................................................................................................................29

3.7.4. GPIOs .........................................................................................................................29

3.8. RF Antenna Interfaces............................................................................................................30

3.8.1. Operating Frequency...................................................................................................30

3.8.2. Pin Definition of RF Antenna Interface........................................................................30

3.8.3. Reference Design........................................................................................................31

3.8.4. Reference Design of RF Routing.................................................................................31

3.8.5. Requirements for Antenna Design ..............................................................................33

3.8.6. RF Connector Recommendation.................................................................................33

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 5 / 51

4Electrical Characteristics & Reliability..........................................................................................36

4.1. General Description................................................................................................................36

4.2. Absolute Maximum Ratings & Recommended Operating Conditions.....................................36

4.3. I/O Interface Characteristics...................................................................................................37

4.4. Power Consumption...............................................................................................................37

4.5. Wi-Fi RF Performances..........................................................................................................38

4.5.1. Conducted RF Output Power ......................................................................................38

4.5.2. Conducted RF Receiving Sensitivity ...........................................................................39

4.6. Bluetooth RF Performance.........................................................................................................40

4.6.1 Conducted RF Output Power ......................................................................................41

4.6.2 Conducted RF Receiving Sensitivity ...........................................................................41

4.7. ESD........................................................................................................................................41

5Mechanical Information..................................................................................................................43

5.6 Mechanical Dimensions..........................................................................................................43

5.7 Top and Bottom Views ...........................................................................................................44

6Storage, Manufacturing & Packaging............................................................................................45

6.6 Storage Conditions.................................................................................................................45

6.7 Manufacturing and Soldering..................................................................................................46

6.8 Packaging Specifications........................................................................................................48

6.8.1 Carrier Tape................................................................................................................48

6.8.2 Plastic Reel .................................................................................................................48

6.8.3 Packaging Process......................................................................................................49

7Appendix References .....................................................................................................................50

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 6 / 51

Table Index

Table 1: Special Marks............................................................................................................................ 12

Table 2: Key Features............................................................................................................................. 13

Table 3: I/O Parameters Definition.......................................................................................................... 18

Table 4: Pin Description.......................................................................................................................... 18

Table 5: Definition of Power Supply and GND Pins................................................................................. 21

Table 6: Definition of Buck Circuit Pins ................................................................................................... 21

Table 7: Recommended Inductance Parameters.................................................................................... 22

Table 8: Pin Definition of SDIO Interface................................................................................................. 23

Table 9: Pin Definition of WLAN_EN....................................................................................................... 24

Table 10: Pin Definition of WLAN_WAKE ............................................................................................... 24

Table 11: Pin Definition of UART Interface.............................................................................................. 25

Table 12: Pin Definition of BT_EN........................................................................................................... 26

Table 13: Pin Definition of BT_WAKEUP_HOST and HOST_WAKEUP_BT .......................................... 27

Table 14: Pin Definition of PCM Interface ............................................................................................... 27

Table 15: Pin Definition of WLAN_SLP_CLK Interface ........................................................................... 28

Table 16: WLAN_SLP_CLK Parameter Recommendation...................................................................... 28

Table 17: XO Parameter Definition.......................................................................................................... 29

Table 18: Pin Definition of SDIO_VSEL .................................................................................................. 29

Table 19: Pin Definition of GPIOs............................................................................................................ 30

Table 20: FC905A Operating Frequency................................................................................................. 30

Table 21: Pin Definition of RF Antenna Interfaces................................................................................... 30

Table 22: Antenna Cable Requirements ................................................................................................. 33

Table 23: Antenna Requirements............................................................................................................ 33

Table 24: Absolute Maximum Ratings..................................................................................................... 36

Table 25: Recommended Operating Conditions...................................................................................... 36

Table 26: General DC Electrical Characteristics ..................................................................................... 37

Table 27: Power Consumption of the Module ......................................................................................... 37

Table 28: Conducted RF Output Power at 2.4 GHz ................................................................................ 38

Table 29: Conducted RF Output Power at 5 GHz ................................................................................... 39

Table 31: Conducted RF Receiving Sensitivity at 5 GHz ........................................................................ 40

Table 32: Conducted RF Output Power .................................................................................................. 41

Table 33: Conducted RF Receiving Sensitivity at 2.4 GHz ..................................................................... 41

Table 34: Electrostatic Discharge Characteristics (25 ºC, 45 % Relative Humidity)................................ 41

Table 35: Recommended Thermal Profile Parameters ........................................................................... 47

Table 36: Carrier Tape Dimension Table (Unit: mm)............................................................................... 48

Table 37: Plastic Reel Dimension Table (Unit: mm)................................................................................ 49

Table 38: Related Documents................................................................................................................. 50

Table 39: Terms and Abbreviations......................................................................................................... 50

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 7 / 51

Figure Index

Figure 2: Pin Assignment (Top View)...................................................................................................... 17

Figure 4: Power-up Timing...................................................................................................................... 21

Figure 6: WLAN Application Interface Connection .................................................................................. 22

Figure 7: SDIO Interface Connection ...................................................................................................... 23

Figure 8: Block Diagram of Bluetooth Application Interface Connection ................................................. 25

Figure 9: Reference Design for UART Interface Connection................................................................... 26

Figure 10: PCM Interface Connection..................................................................................................... 27

Figure 12: Microstrip Design on a 2-layer PCB ....................................................................................... 31

Figure 13: Coplanar Waveguide Design on a 2-layer PCB ..................................................................... 31

Figure 14: Coplanar Waveguide Design on a 4-layer PCB (Layer 3 as Reference Ground)................... 32

Figure 15: Coplanar Waveguide Design on a 4-layer PCB (Layer 4 as Reference Ground)................... 32

Figure 16: Dimensions of the U.FL-R-SMT Connector (Unit: mm).......................................................... 34

Figure 17: Mechanicals of U.FL-LP Connectors...................................................................................... 34

Figure 18: Space Factor of Mated Connector (Unit: mm)........................................................................ 35

Figure 19: Top and Side Dimensions (Top and Side View)..................................................................... 43

Figure 22: Top & Bottom View of FC905A .............................................................................................. 44

Figure 23: Recommended Reflow Soldering Thermal Profile.................................................................. 46

Figure 24: Carrier Tape Dimension Drawing....................................................................................... 48

Figure 25: Plastic Reel Dimension Drawing........................................................................................ 48

Figure 26: Packaging Process................................................................................................................. 49

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 8 / 51

1Introduction

This document defines the FC905A and describes its air interfaces and hardware interfaces which are

connected with your application.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to

avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna

shall not be less than 20cm (8 inches) during normal operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Any changes or modifications not expressly approved by the party responsible forcompliance could void

the user's authority to operate this equipment. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Important Notice to OEM integrators

1. This module is limited to OEM installation ONLY.

2. This module is limited to installation in fixed applications, according to Part 2.1091(b).

3. The separate approval is required for all other operating configurations, including portable

configurations with respect to Part 2.1093 and different antenna configurations

4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify

compliance as a composite system. When testing the host device for compliance with Part

15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the

transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation

should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band

Wi-Fi&Bluetooth Module Series

FC905A_Hardware_Design 9 / 51

emissions). The host manufacturer must verify that there are no additional unintentional emissions other than

what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s).

The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed.

Important Note notice that any deviation(s) from the defined parameters of the antenna trace, as

described by the instructions, require that the host product manufacturer must notify to Quectel Wireless

Solutions Co., Ltd that they wish to change the antenna trace design. In this case, a Class II permissive

change application is required to be filed by the USI, or the host manufacturer can take responsibility through

the change in FCC ID (new application) procedure followed by a Class II permissive change application.

End Product Labeling

When the module is installed in the host device, the FCC/IC ID label must be visible through a window

on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a

second label must be placed on the outside of the final device that contains the following text: “Contains FCC

ID: XMR202208FC905A”

The FCC ID can be used only when all FCC compliance requirements are met.

Antenna Installation

(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,

(2) The transmitter module may not be co-located with any other transmitter or antenna.

(3) Only antennas of the same type and with equal or less gains as shown below may be used with this

module. Other types of antennas and/or higher gain antennas may require additional authorization for

operation.

(4) The max allowed antenna gain is WIFI 2.4G/BT 0.52dBi; WIFI 5G 0.66 dBi for external antenna.

In the event that these conditions cannot be met (for example certain laptop configurations or co-location

with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID/IC ID

cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for

re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization.

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install

or remove this RF module in the user’s manual of the end product which integrates this module. The end

user manual shall include all required regulatory information/warning as show in this manual.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage

préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.

Table des matières

Autres manuels Quectel Unité de contrôle

Quectel

Quectel BC950N-N1 Supplément

Quectel

Quectel EP06 Manuel utilisateur

Quectel

Quectel BG96 Manuel d'installation

Quectel

Quectel EC25 series Manuel utilisateur

Quectel

Quectel LTE Module Series Manuel utilisateur

Quectel

Quectel EC25 Mini PCIe Supplément

Quectel

Quectel L70 Instructions d'installation

Quectel

Quectel EM06 Manuel utilisateur

Quectel

Quectel SC20-A Manuel utilisateur

Quectel

Quectel GNSS Module Series Manuel utilisateur

Quectel

Quectel EC20 Manuel de service

Quectel

Quectel NB-IoT Module Series Manuel utilisateur

Quectel

Quectel UC200T-EM Supplément

Quectel

Quectel EC2 Series Mode d’emploi

Quectel

Quectel RMU500-EK Manuel utilisateur

Quectel

Quectel M50 Supplément

Quectel

Quectel EC25 series Mode d’emploi

Quectel

Quectel MC90-TE-A Manuel utilisateur

Quectel

Quectel LTE Standard Instructions d'installation et d'utilisation

Quectel

Quectel FGM842D Supplément

Quectel

Quectel SG865W Series Supplément

Quectel

Quectel EM160R-GL Supplément

Quectel

Quectel EG915U Series Supplément

Quectel

Quectel M.2 EVB Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur