Quatech DP-PCIE-100 Manuel utilisateur

May/07 MN2000000087

DP-PCIE-100

User Manual

Ver. 2.00

All brand names and trademarks are properties of their

respective owners.

May/07 MN2000000087

Features and Benefits

Features zCompliant with PCI Express Base Specification

1.0a

zSupports Standard Parallel Port(SPP), Enhanced

Parallel Port(EPP) & Enhanced Capability

Port(ECP)

zData transfer rate up to 1.5MB/Sec

zSupport Windows® 2000, XP, Server 2003, Vista

Bus zPCI-Express X1

Connectors z2 x 25 pins parallel connectors

Package Contents

z1 x DP-PCIE-100 Card

z1 x Bracket with one DB25 female parallel port

z1 x Driver CD

System Requirements

zWindows® 2000/XP/Server 2003/Vista

zPCI Express-enabled system with an available PCI Express slot

May/07 MN2000000087

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down

firmly.

5. Replace the slot bracket’s holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver

installation.

May/07 MN2000000087

For Windows® 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes, then click

Next.

4. Insert the Driver CD, type in the following

D:\Drivers\PCIExpress\DP-PCIE-100\2000, then click OK.

(Change D: to match your CD-ROM driver letter)

5. Click Next and Finish.

6. Restart Windows to complete the installation.

For Windows® XP

1. At the Found New Hardware Wizard, select Install from a list

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other boxes, type in the following:

D:\Drivers\PCIExpress\DP-PCIE-100\XP, then click OK.

(Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

May/07 MN2000000087

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 two more times.

5. Restart Windows to complete the installation.

For Windows® Server 2003

1. At the Found New Hardware Wizard, select Install from a list

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other box, type in the following:

D:\Drivers\PCIExpress\DP-PCIE-100\2003, then click OK.

(Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 two more times.

5. Restart Windows to complete the installation.

For Windows® Vista

1. At the Found New Hardware Wizard, select Locate and install

driver software (recommended).

May/07 MN2000000087

2. Click on I don’t have the disc. Show me other options.

3. Select the option Browse my computer for driver software

(advanced).

4. Insert the driver CD, check Include subfolders, type in

D:\Drivers\PCIExpress\DP-PCIE-100\Vista32, then click Next.

(Change D: to match your CD-ROM drive letter)

5. If the system prompts the user informing the drivers are not

signed, select the option Install this driver software anyway.

6. Click on Close to complete the driver installation.

To Verify Windows® Driver Installation

1. Right click My Computer, then click Manage. Click Device

Manager.

2. Click on the + (plus sign) in front of Ports(COM & LPT), two

MosChip PCI Parallel Port … should be displayed.

3. Double click Multifunction adapters, MosChip PCI Multi-I/O

Controller should be displayed.

Change The Parallel Port Number

Some parallel devices need a specific parallel port number in order to

May/07 MN2000000087

work. If your parallel device works properly, do not change this setting.

For Windows® 2000/XP/Server 20003/Vista Installation

1. From the Device Manager window double click Ports(COM &

LPT), then double click the MosChip PCI Parallel Port

2. Click Port Settings tab.

3. At the LPT Port Number box, click the down arrow and select

an LPT port that is not in use.

4. Click OK, then close Device Manager to save the changes.

Table des matières

Autres manuels Quatech Matériel informatique

Quatech

Quatech SSCF-200 Manuel utilisateur

Quatech

Quatech DS-100 Manuel utilisateur

Quatech

Quatech QS-300M Manuel utilisateur

Quatech

Quatech DP-PCIE-100 Manuel utilisateur

Quatech

Quatech DS-102 Manuel utilisateur

Quatech

Quatech DS-3000 Manuel utilisateur

Quatech

Quatech WLEA-RA-DP501 Manuel du propriétaire

Quatech

Quatech PCD2-F Manuel utilisateur

Quatech

Quatech ES-100D Manuel utilisateur

Quatech

Quatech DS-1000 Manuel utilisateur

Quatech

Quatech HS-PCIE-100 Manuel utilisateur

Quatech

Quatech ES-100M Manuel utilisateur

Quatech

Quatech SPP-100 Manuel utilisateur

Quatech

Quatech SSPX-100 Manuel utilisateur

Quatech

Quatech DS-302 Manuel utilisateur

Quatech

Quatech SSCF-100 Manuel utilisateur

Quatech

Quatech XCD-B/PCIE-ST Manuel utilisateur

Quatech

Quatech DS-PCIE-100 Manuel utilisateur

Quatech

Quatech QSSP-PCIE-100 Manuel utilisateur

Quatech

Quatech DSSP-PCIE-100 Manuel utilisateur

Quatech

Quatech DSPXP-100 Manuel utilisateur

Quatech

Quatech QS-PCIE-100 Manuel utilisateur

Quatech

Quatech DSPXP-100 Manuel utilisateur

Quatech

Quatech MPA-100 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur