Qazqa 45839 Manuel utilisateur

Table des matières

Autres manuels Qazqa Éclairage extérieur

Qazqa

Qazqa Zaandam FL Manuel utilisateur

Qazqa

Qazqa 90495 Manuel utilisateur

Qazqa

Qazqa Mossa WL PIR Black 89437 Manuel utilisateur

Qazqa

Qazqa NAUTICA WL 1 Manuel utilisateur

Qazqa

Qazqa Eva FL 1 Bronze Manuel utilisateur

Qazqa

Qazqa Empoli FL Satin CCT 2 Manuel utilisateur

Qazqa

Qazqa Noud FL 105052 Manuel utilisateur

Qazqa

Qazqa Margarita FL 36 Black Manuel utilisateur

Qazqa

Qazqa 90500 Manuel utilisateur

Qazqa

Qazqa Odense P50 Black Manuel utilisateur

Qazqa

Qazqa Margarita FL 23 Black Manuel utilisateur

Qazqa

Qazqa Grande FL Satin Manuel utilisateur

Qazqa

Qazqa Charlois WL Black PIR Manuel utilisateur

Qazqa

Qazqa Frances FL 1 Manuel utilisateur

Qazqa

Qazqa Empoli FL Brass CCT 2 Manuel utilisateur

Qazqa

Qazqa NAUTICA WL 2 Manuel utilisateur

Qazqa

Qazqa Stylish FL Satin 92023 Manuel utilisateur

Qazqa

Qazqa Charlois WL Black Manuel utilisateur

Qazqa

Qazqa Antigua P220 Bronze Manuel utilisateur

Qazqa

Qazqa Parte FL Black Manuel utilisateur

Qazqa

Qazqa JeIena FL 2 Manuel utilisateur

Qazqa

Qazqa Garly SL 4 Black Solar Manuel utilisateur

Qazqa

Qazqa Elif FL 1 Black Gold Manuel utilisateur

Qazqa

Qazqa Pallon FL Brass Pink Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur

INSTALLATION INSTRUCTIONS

Please read these instructions carefully before attempting to install this

product. It is advisable to keep these instructions in a safe place for future reference.

Must be installed by a qualified electrician.

PARAMETER:

IP Rating IP44

Rated Voltage AC 220-240V, 50Hz

Rated Wattage 3xMax. 100W

Protection Class Class I

Lampholder E27

Electrical Installation

Always switch off the electricity supply at the mains during installation and maintenance. We

recommend that the fuse is withdrawn or circuit breaker switched off at the distribution board whilst

work is in progress (turning off the light switch is not sufficient).

1. A concrete filled hole with insulated piping for the mains cable need to be setup. Feed the

mains cable through the insulated piping (not supplied) allowing enough surplus to connect

into the terminal block.

We suggest that you use H05RN-F specification cable (not supplied) which is an outdoor grade,

rubber sheathed cable. The cable must have a minimum cross sectional area of 1.0mm².

2. Fix the tripod (A) on top the concrete.

3. Insert the three anchor bolts (B) through the tripod (A) into the concrete with the threaded part

above the ground.

4. The next thing can do once the concrete has dried.

5. Twist and remove the cover and install the lamp.

Replacement lamp(s) should be of the same type, voltage and wattage as specified on the label.

CAUTION: The lamp will become hot. Switch off and allow to cool before changing the

lamp.

6. String the electric cord, from the lamp head (F) thru upper pole (E), lower pole (D) and base

(C).

7. Attach the lamp head (F) onto the upper pole (E) and then secure the two together with the

hex bolts (J3).

8. Connect the mains supply to the terminal block, using the following colour code for the wiring:

Connect the Brown (Live) wire to the corresponding terminal on the terminal block marked L.

Connect the Green/Yellow (Earth) from the mains supply to the Earth terminal marked E or .

Connect the Blue (Neutral) wire to the corresponding terminal on the terminal block marked N.

9. Lift the base (C) onto the anchor bolts (B) and secure with the nut covers (J1) and locking

washers.

10. Attach base (C) to lower pole (D) using screws (J2) and locking washers.

11. Thread lower pole (D) to upper pole (E) and secure with the screw.

12. Restore mains supply and switch on.

Care and Use

1. This product must be earthed.

2. Please use the double-pole-off switch.

3. Replace any cracked/damaged diffuser immediately-do not use if they are damaged.

45839

A

B

C

D

E

F

J1 J2

J3