Pyronix Enforcer V10 Manuel utilisateur

Wireless Alarm System

User Guide

RINS1902

Document SAP: 102015108-03

Alarm Panel

Time 10:09 c

Enforcer V!0 User Guide

Contents

ProControl+ 4

Setting Devices 5

The Wireless Panel Keypad 5

Wireless Keyfobs 5

Locking the Keyfob 5

Setting the System 6

Using a PIN Code or Proximity Tag 6

Using the Wireless Keyfob 6

Unsetting the System 7

Using a PIN Code or Proximity Tag 7

Using the Wireless Keyfob 7

Unsetting after an Alarm 7

Using a PIN Code or Proximity Tag 7

Using the Wireless Keyfob 8

Fault Indications & Unable to Set 8

Fault Indications 8

Control Panel 8

Unable to Set 8

Control Panel Indication 8

Keyfob Indication 8

Advanced Functions 9

Chime 9

Omitting Inputs 9

Keypad Hold Up 9

Master Manager Mode Overview 10

Entering Master Manager Mode 11

Exiting Master Manager Mode 11

Master Manager Mode Options 12

Set Time and Date 12

Enforcer V10 User Guide

Omit Inputs 12

Edit Users 13

Flexi-set 13

Adding a New User 13

Deleting a User 14

Change User 14

Change Master Manager Code 15

Review Logs 15

Wi-Fi Setup 15

ProControl+ Smart Device Application 16

Basic Controls 16

Connecting to the Panel 16

Intruder Alarm Homescreen 17

Advanced Controls 18

History 18

Setting/Unsetting Logs 19

Installation Information 20

Engineer Information 20

Input Table 20

Users 21

Standard Users 21

Guard, Duress and Dial Back Users 21

Notes 22

Extended User Guide 23

Enforcer V!0 User Guide

ProControl+

Connect to your home from anywhere

AES-256

Encryption

Set and unset your system

View your system status in real time, including: alarm, CO and

smoke detectors

Customise and receive push notifications from your system

Have instant access to your events and history log

Control appliances such as lights, garage doors, gates and

blinds

All using an encrypted, highly secure system, for extra peace

of mind that your family and home is safe and secure

https://apple.co/2N4DF51https://play.google.com/store/apps/

details?id=com.mcu.Pyronix&hl=en

Enforcer V10 User Guide

Setting Devices

The Wireless Panel Keypad

a= Exits the Master Manager menu and selects Area

A when setting.

b= Moves backwards in the Master Manager menu

and selects Area B when setting.

c= Enables chime, displays additional information

in the event log, and selects Area C when setting.

d= Moves forward in the log, scrolls between

options, enters the Master Manager menu and selects Area D when setting.

fp= Not used.

[]= Directional buttons and enables/disables functions.

f= Enters menus and accepts programming preferences.

h= Cancels items, resets the panel and moves to next item in a menu item.

Wireless Keyfobs

The wireless keyfob has four buttons that may be programmed for specic purposes, these

options are programmed in the ‘EDIT USERS?’section.

Locking the Keyfob

All four buttons on the keyfob may be locked so that any accidental presses will not aect

your wireless alarm system. For example, this protects the buttons from being pressed

accidentally if a keyfob is in someone’s pocket.

OR OR

5 seconds 5 seconds

Enforcer V!0 User Guide

Setting the System

Using a PIN Code or Proximity Tag

Enter a valid PIN code or present a valid tag to the

symbol as shown.

Enter Your Code

[******]

Enter the area you wish to set and press f.

‘Please wait setting wireless’will be displayed.

Set Areas?[A ]

There are three dierent setting methods your

installer will instruct you through:

Final Door: Leave the building and make sure the

exit door is closed properly.

Timed: Make sure you leave the building before the

timer shown on the keypad expires.

Push to set: Press the push to set button installed by

your engineer to set the system.

Please leave via

Exit Route

Using the Wireless Keyfob

To set via a keyfob. Pressand hold for more than 2 seconds.

The keyfob LED will start to ash green indicating that the system

is starting to set.

‘Please wait setting wireless’ will be displayed on the keypad and

the programmed area will begin to set.

To ‘quick set’, press and hold thekey again for four seconds.

Once set, the keyfob LED will illuminate RED indicating that the

system is now set.

<2 seconds

Enforcer V10 User Guide

Unsetting the System

Using a PIN Code or Proximity Tag

Enter the building, the ‘entry time’will start. ENTRY TIME [30]

Enter a valid PIN code or present a valid tag to the

symbol as shown.

Enter Your Code

[******]

The area that the code is assigned to will be unset. Alarm Panel

Time 10:09 c

Please note: If ‘exi-set’is disabled then the system will automatically unset that level set once a valid user

code or tag is presented.

Using the Wireless Keyfob

To unset via a keyfob. Press .

The keyfob LED will ash green indicating that the system has

unset.

Please note: Unsetting with a keyfob will only be allowed if your engineer

has enabled this.

<2 seconds

Unsetting after an Alarm

Using a PIN Code or Proximity Tag

Enter a valid PIN code or present a valid tag to the

symbol as shown.

Enter Your Code

[******]

The alarm symbol will ash indicating there has

been an alarm activation and the keypad will

display which input has activated.

Alarm Silenced

Lounge

Press hto reset the system. Alarm Panel

Time 10:09 c

Enforcer V!0 User Guide

Using the Wireless Keyfob

To unset via a keyfob. Press .

The keyfob LED will start to ash green indicating that the system

has unset.

Resetting the system after an alarm can only be done at the keypad.

Please note: Unsetting with a keyfob will only be allowed if your engineer

has enabled this.

<2 seconds

Fault Indications & Unable to Set

Fault Indications

Control Panel

Any faults that occur on the system will be easily

recognised by the ashing ALERT LED.

Alarm Panel

Time 10:09 c

To see what the fault is, enter a valid PIN code, or

present a valid tag, or press on the keyfob.

Depending on how the system has been set up by

your engineer, it may be possible to set the system

with a fault, to do this press f.

Control Panel

Battery Fault

Please note: Any fault may aect the overall performance of your alarm control panel and therefore your

engineer should be contacted for further assistance if any fault is active.

Unable to Set

Control Panel Indication

If‘unable to set’is displayed, it indicates that an input

is open and the area where the input is should be

checked for open windows, pets, movement etc.

If the problem cannot be solved contact your

engineer, or omit the input.

Unable To Set

Input 01

Keyfob Indication

If the panel is unable to set for any reason, the keyfob status LED ashes amber indicating a

fault is on the system.

Enforcer V10 User Guide

Advanced Functions

Chime

The chime can be used for any input on the system.

This can be set up by your engineer.

To enable the chime on the keypad, when the time

is displayed, press c.

‘c’ will be displayed on the right side of the keypad

display. Press cagain to clear the chime feature.

Alarm Panel

Time 10:09 c

Omitting Inputs

On occasion, a detector may need to be isolated if

a room is occupied.

Enter your User Code.

Press f.

Select the inputs that need to be omitted’

Press a.

After 10 seconds the exit time continues.

Omit Day Al [01]

Please note: Inputs have to be programmed as omittable by your engineer for this feature to operate.

Keypad Hold Up

A ‘hold up’ alarm will be generated when 1and

7are pressed and held down for 2 seconds (this

time period can be altered by your engineer).

Alarm Silenced

2 Key HU

Please note: The keyfob can also be programmed to initiate a hold up alarm. All hold up alarms including

duress codes must be enabled by the engineer.

Enforcer V!0 User Guide

Master Manager Mode Overview

The Master Manager Menu has the following functions:

Please note: The options visible will depend on which modem is installed in the panel.

Set Date and Time

Programs the date and time.

Operate User Outputs

Activates/deactivates user automation outputs that are used to remotely activate devices,

such as electronic gates & lights.

Omit Inputs

Omits inputs programmed as ‘Day Alarm’ only.

Edit Users

Adds/Edits/Deletes User PIN codes, tags and keyfobs.

Review Logs

Displays all event log information.

SMS Phonebook

If SMS texting is enabled, there can be up to 10 mobile numbers programmed to send SMS

alarms. Please discuss this feature with your installer if required.

Please note: Third party SIM cards only.

Voice Phonebook

Edits the telephone numbers that the panel is programmed to send voice messages to.

Set Up App Data

If the ProControl+ App has been enabled, this function will control the settings.

Wi-Fi Setup

Adds or changes a Wi-Fi connection with your router.

Walk Test

Tests each input.

Siren Test

Tests all external sounders (wired or wireless).

Table des matières

Autres manuels Pyronix Système de sécurité

Pyronix

Pyronix EURO 46 V10 Manuel utilisateur

Pyronix

Pyronix PCX 256 Manuel utilisateur

Pyronix

Pyronix Enforcer 32WE Manuel utilisateur

Pyronix

Pyronix Enforcer 32WE Manuel utilisateur

Pyronix

Pyronix OCTAGON II Manuel utilisateur

Pyronix

Pyronix 256 Guide de l'utilisateur

Pyronix

Pyronix V2 TEL Manuel utilisateur

Pyronix

Pyronix HOMECONTROLHUB Manuel utilisateur

Pyronix

Pyronix ENFORCER Series Manuel du propriétaire

Pyronix

Pyronix Deltabell E Manuel utilisateur

Pyronix

Pyronix RINS1902-2 Manuel utilisateur

Pyronix

Pyronix EURO 46 APP Manuel utilisateur

Pyronix

Pyronix ENFORCER RINS1706-1 Manuel de service

Pyronix

Pyronix PCX 256 Manuel du propriétaire

Pyronix

Pyronix Vocaliser Manuel utilisateur

Pyronix

Pyronix EURO 46 V10 Manuel utilisateur

Pyronix

Pyronix ENFORCER V11 Manuel de service

Pyronix

Pyronix PCX 256 Manuel utilisateur

Pyronix

Pyronix Wireless Alarm system Manuel utilisateur

Pyronix

Pyronix STERLING 10 Manuel utilisateur

Pyronix

Pyronix Paragon Plus Manuel utilisateur

Pyronix

Pyronix XD15TT Manuel utilisateur

Pyronix

Pyronix Matrix 424 Manuel utilisateur

Pyronix

Pyronix Enforcer Guide de configuration

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur