Pyle PWMA3003BT Manuel utilisateur

PWMA3003BT

Wireless BT Home Amplifier Receiver

and Microphone System

Hybrid Pre-Amplifier with (2) Wireless Microphones,

MP3/USB/SD/AUX/AM/FM Radio (3000 Watt)

www.PyleUSA.com

Safety Instructions

CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN

THE AMPLIFIER OR REMOVE THE COVER. There are no user serviceable

parts inside-please use a qualied technician for all servicing.

WARNING: To prevent electrical shock or re hazard ,this amplier should

not be exposed to rain or moisture. Do not place objects lled with liquid,

such as vases, on the amplier.

WHEN USING ELECTRICAL PRODUCTS, CAUTION SHOULD ALWAYS BE USED.

PLEASE READ AND KEEP THESE SAFETY INSTRUCTIONS.

Precaution

1. Power Source

The unit should be connected to a power supply AC-120V/60Hz,

AC-240V/50Hz.

2. Ventilation

The unit should be situated so that its location or position does not

interfere with its proper ventilation. Place the unit at least 10cm away

from the walls.

3. Water and Moisture

The unit should not be used near water-for example, near a swimming

pool in a wet basement, etc.

4. Electric Shock

If a metal object, such as hair pin or needle comes into contact inside this

unit, a dangerous electric shock may result. For families with children,

never permit children to put anything, especially metal, inside this unit.

Intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may

be strong enough to create a risk electric shock to a person.

Intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

www.PyleUSA.com

5. Enclosure Removal

Never remove the enclosure. If the internal parts are touched accidentally,

a serious electric shock might occur.

6. Abnormal Smell

If an abnormal smell or smoke is detected, immediately turn the power

OFF and pull out the power cord. Contact your dealer or nearest service

station.

1. POWER SWITCH: Press to switch the power unit ON or OFF.

2. : This knob is used to select the preview station which has been kept

in system.

3. TUNING - : Radio tuning button. Decrements the radio frequency.

4. : This knob is used to select the next station which has been kept in

system.

5. TUNING +: Radio tuning button. Increments the radio frequency.

6. : play/pause song button on USB/SD card

7. AM/FM SELECTOR

8. INPUT: This is used to select the input sources:

DVD/CD,TUNER,IPOD/MP3 AUX

9. MENU CONTROL: This is used to increment and decrement level for the

selected function of Master Volume, Bass, Treble, Balance, Auto Station seek.

10. FUNCTION DISPLAYED FLUORESCENT WINDOW

1 2 3 41 6 8

121 120 119 118 117 116 115 114

5 7 9 10 11 12 13

www.PyleUSA.com

11. SUB. OUT VOLUME CONTROL

12. LED DIMMER

13. MASTER VOLUME CONTROL: Adjusts the blue lights and blue rings.

Adjusts the volume level. Turn the knob clockwise to increase the volume.

14. ECHO CONTROL: Turn the knob to adjust the MIC echo level.

15. MIC TREBLE: Adjusts the treble of MIC.

16. MIC BASS: Adjusts the bass of MIC.

17. MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to

increase the MIC volume .

18. USB/SD: Card input

19. MIC INPUT JACKS 1 & 2 KARAOKE MIC: Connect to these jacks.

20. HEADPHONE JACK: Headphone connect to this jack.

21. IPOD/MP3 JACK: Connect to this jack

1. TUNER ANT: Connect for AM and FM antennas.

2. AUDIO INPUT JACKS:

Connect the audio output jacks of CDNCD/DVD, AUX to these jacks.

3. REC. LINE OUTPUT JACKS:

Connect the RECORD input jacks to these jacks.

4. PRE OUTPUT JACKS:

Connect the pre professional input jacks to these jacks.

5. SUB-WOOFER OUTPUT JACKS 1 & 2

6. A SPEAKER OUTPUT TERMINALS:

Connect your speaker system to these terminals.

7. B SPEAKER OUTPUT TERMINALS: Connect your outer speaker system(s)

to these terminals.

11 12 13 14 15 16 17 18 19 110

www.PyleUSA.com

8. COOLING FAN

9. 115/230 SWITCH: According to power voltage,push this button to the

station of the 115V or 230V.

10. POWER CORD: Connect to AC 115V/60Hz & 230V/50Hz outlet.

www.PyleUSA.com

Remote Control

1. MUTE: Mute Selector

2. INPUT TUNER /Mp3/AUX,IPOD/DVD,CD:

Signal input selector.

3. AUTO SCAN FM: Auto scan selector,

scan and store stations auto matically.

Can store 30 stations.

4. FM/AM: Fm/am Signal input selector. TUNER

5. MENU: This is used to increment and

decrement level for the selected function of

master Volume, Bass, Treble, Balance, Auto

station seek.

6\8. VOL- VOL+: Master volume down and up.

7\14. PREV NEXT: Station preview and next

selector

9. STOP: USB/SD stop

10/11 TUNING- TUNING+: The two keys are

used to adjust to the best signal of the

12. REPEAT: USB/SD playing the song again

13. EQ: Allows the adjustment of specic

frequency bands.

15. PLAY/PAUSE: USB prev select key

16. ST/MO: Stereo and mono selector

17. MEMORY: After a station has been found,

you can store the stationby pressing the

MEMORY button, and the screen will

display SAVE.

18. DIGITAL: Tuning AM/FM button

19. RESET: The entries are reset to the default

values

www.PyleUSA.com

A. Remote control should be operated within 6 meters with a scope of 30°

in front of the receiver.

B. Make sure that there is no large obstacle between the remote control and

the machine.

C. Remote sensor should be far away from the light, high amounts of light

can aect its performance.

How to replace the preset radio stations?

Use the remote control to set the radio stations.

NOTE: The preset stations can't be deleted, BUT CAN BE REPLACED.

Operations Steps

1. Press TUNER MODE on the remote control

2. Press AM/FM, and select FM

3. Press PRE/NEXT to select the stations you don't want to keep

4. Press TUNING again, choose the radio stations you want to keep

5. Press MEMORY to save the new stations.

In this way, you can replace the preset radio stations.

SAFETY INSTRUCTIONS

1. Make sure that all connections are properly connected and the main

volume is set to minimum level before turning ON the unit.

2. When more than one pair of speakers are used, (specially the main

speaker output) make sure that the speakers used are of the same wattage

and impedance, otherwise the unit maybe damaged under high power or

long term operation.

3. To avoid humming sounds and unwanted noise,make sure that all the

wires are properly inserted

4. For speaker cords, strip o the vinyl coating and twist the wire tip.

Push down the pink jack or loosen the screw terminal, before inserting the

wire tip, then fasten it and tighten the screw. Be careful not to let the wires

stick out ofthe terminal otherwise this may cause a short circuit when

wires of dierent terminal contact each other.

5. After the unit is turned ON, adjust the main volume to the desired level

same with the bass and treble volume, etc.

www.PyleUSA.com

PWMA3003BT

3000 Watts Home Amplier+Microphone Receiver

Wireless BT Streaming Hybrid Amplier Receiver

Pro Audio Multi-Channel Stereo Pre-Amplier System with (2) VHF Wireless

Microphones, MP3/USB/SD Readers, FM Radio, Rack Mount (3000 Watt)

Features:

• Home Theater Pro Audio Receiver

• High-Powered Hybrid Pre-Amplier

• Multi-Channel Source Audio Selection

• Built-in Bluetooth for Wireless Music Streaming

• Includes (2) VHF Wireless Handheld Microphones

• FM Radio with Digital LCD Display

• USB Flash & SD Memory Card Readers

• MP3 Audio File Playback Support

• Connect & Stream Audio from External Devices

• Aux (3.5mm) Input Jack

• (2) 1/4’’ Microphone Inputs

• Headphone Jack, 1/4’’

• RCA (L/R) Audio Input/output Jacks

• Dedicated for Subwoofer Output

• Screw-Type Speaker Terminal Binding Posts

• Front Panel Button & Rotary Control Center

• Independent Audio Source Selection

• LED Backlight Illumination with Dimmer Control

• Microphone Volume/Echo Control

• Integrated Overload & Short Circuitry Protection

• Built-in Cooling Fan

• Universal Rack Mount Design

What’s in the Box:

• Hybrid Pre-Amplier

• (2) VHF Wireless Handheld Microphones

• Detachable Rack-Mount Brackets

• FM Antenna/Bluetooth Antenna

• Remote Control

• Power Cable

www.PyleUSA.com

Wireless BT Connectivity:

• Built-in Receiver for Wireless Audio Music Streaming

• Simple & Hassle-Free Pairing

• Works with All of Today’s Latest Devices

(Smartphones, Tablets, Laptops, Computers, etc.)

• Wireless BT Version: 5.0

• Wireless BT Network Name: ‘PYLE’

• Wireless Range: 35’+ ft.

Technical Specs:

• Power Output: 3000 Watt MAX

• 900 Watt @ 2 Ohm

• 450 Watt @ 4 Ohm

• 300 Watt @ 8 Ohm

• Frequency Response: 40Hz-15 kHz, +/-2dB

• S/N Ratio: >76dB

• T.H.D.: <1%

• Radio Station Memory Presets: 30

• Digital Media File Playback Support: MP3/WMA/WAV/FLAC/APE

• Maximum USB/SD Flash Memory Support: Up to 64GB

• Battery Operated Remote, Requires (2) x‘AAA’ Battery, Not Included

• Battery Operated Mic, Requires (2) x ‘AAA’ Batteries (Each), Not Included

• Power Cord Length: 4.5’ ft.

• Power Supply: 120/240V, Switchable

• Unit Dimensions (L x W x H): 19.0’’ x 12.0’’ x 3.1’’ –inches

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: suppor[email protected]

This product can expose you to a chemical or group of checmicals, which may include

“Lead (PB)” which is known in the state of California to cause cancer, birth defects, or

other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

Table des matières

Autres manuels Pyle Système de microphone

Pyle

Pyle PDWM2135 Manuel utilisateur

Pyle

Pyle PDWM3300 Manuel utilisateur

Pyle

Pyle PDWM2120 Manuel utilisateur

Pyle

Pyle PDWM3450 Manuel utilisateur

Pyle

Pyle PDWMRET76GL Manuel utilisateur

Pyle

Pyle PDWM4120 Manuel utilisateur

Pyle

Pyle PDWM2150 Manuel utilisateur

Pyle

Pyle PREMIER PDWM 8225 Manuel utilisateur

Pyle

Pyle PDWM5900 Manuel utilisateur

Pyle

Pyle PDWM4300 Manuel utilisateur

Pyle

Pyle PDMW400HD Manuel utilisateur

Pyle

Pyle PDWM3450 Manuel utilisateur

Pyle

Pyle PDWM3360 Manuel utilisateur

Pyle

Pyle PDWM8300 Manuel utilisateur

Pyle

Pyle PDWM2122 Manuel utilisateur

Pyle

Pyle PDWM1902 Manuel utilisateur

Pyle

Pyle PDWM8225 Manuel utilisateur

Pyle

Pyle PDWM2550 Manuel utilisateur

Pyle

Pyle PDMW420PG Manuel utilisateur

Pyle

Pyle PDWM4650 Manuel utilisateur

Pyle

Pyle PDWM 4520 Manuel utilisateur

Pyle

Pyle PDWM8400 Manuel utilisateur

Pyle

Pyle PDMW410BP Manuel utilisateur

Pyle

Pyle PDWMU211 Manuel utilisateur

Manuels Système de microphone populaires d'autres marques

Paso

Paso R824 Manuel utilisateur

Naxa

Naxa NAM-982 Manuel utilisateur

Motorola

Motorola PMNN4461 Manuel utilisateur

Xvive

Xvive U3 Manuel utilisateur

Tekon

Tekon DUOS Manuel utilisateur

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuel utilisateur

Devine

Devine WMD-IE Manuel utilisateur

LG LF-D7150 Manuel utilisateur

GE S768DAV Manuel utilisateur

LD U305 HBH 2 Manuel utilisateur

Chainway

Chainway URA8 Manuel utilisateur

ORATOR

ORATOR D860TD Manuel utilisateur

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur

Alpha Technologies

Alpha Technologies RBMS Manuel utilisateur

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur

Shure

Shure UA844 Manuel utilisateur

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur

Airspan

Airspan AS4000 Mode d’emploi