Pulsar YM22 Manuel utilisateur

CAL. YM22

ANALOGUE ALARM

ENGLISH

TIME/CALENDAR

●Hour, minute and second hands

●Date displayed in numerals

SINGLE-TIME ALARM

●Rings only once at a designated time within the coming 12

hours.

English

DISPLAY AND CROWN/BUTTONS

c: Second click

b: First clicka: Normal position

Hour hand

Minute hand

a b c

Date

ALARM hour hand ALARM minute hand

CROWN

BUTTON

Second hand

English

SCREW DOWN CROWN

[for models with screw down crown]

Locking the crown

1Turn Crown counterclockwise until you no

longer feel the threads turning.

2Crown can be pulled out.

1Push Crown back in to normal position.

2TurnCrownclockwisewhilepressingitlightly

until tight.

Unlocking the crown

English

SETTING THE TIME

●This watch is so designed that the following are all made with the crown at the

second click position:

1) main time setting

2) alarm hand adjustment

Once the crown is pulled out to the second click, be sure to check and adjust 1)

and 2) at the same time.

CROWN Pull out to second click when the second hand is at the 12

o’clock position.

English

1) MAIN TIME SETTING

Hour hand

Minute hand

Second hand

CROWN Turn to set the hour and

minute hands.

* Itisrecommendedthatthe hands beset to thetime a fewminutes ahead ofthe current

time, taking into consideration the time required to set the ALARM hands.

2) ALARM HAND ADJUSTMENT

●Set the ALARM hands to the time the main time hands indicate.

English

▲

Push back in to normal

position in accordance

with a time signal.

* After all the adjustments

are completed, check that

the main time and alarm

hands indicate the same

time.

CROWN

Hour hand Minute hand

ALARM

hour hand ALARM

minute hand

Press repeatedly to set

ALARM hands to the

time indicated by the

main time hands.

* ALARM hands move

quickly if Button is kept

pressed.

BUTTON

English

1Pull out to first click.

2Turn clockwise until the desired

date appears.

3Push back in to normal position.

CROWN

SETTING THE DATE

●Before setting the date, be sure to set the main time.

➠

Date

English

SINGLE-TIME ALARM

ALARM TIME SETTING

Pull out to first click.

CROWN

Press repeatedly to set the

desired alarm time.

* ALARMhands movequickly

if Button is kept pressed.

▲

ALARM

hour hand ALARM minute hand

●The alarm can be set to ring only once at a designated time within the coming 12

hours.

●The alarm time can be set in one minute increments.

●Before using the alarm, check that the ALARM hands are adjusted to the current

time. (See “SETTING THE TIME”)

BUTTON

English

Push back in to normal

position.

CROWN

▲

HOW TO STOP THE ALARM

HOW TO CANCEL THE ALARM TIME YOU HAVE SET

* The alarm is automatically

engaged.

Pull out to first click.

CROWN

●At the designated time the alarm rings for 20 seconds, and it is automatically

disengaged. To stop it manually, press Button.

▲

Push back in to normal

position.

CROWN

▲

➠

Press and hold until

ALARM hands stop and

indicate the current time.

BUTTON

English

SINGLE-TIME ALARM

SETTING THE TIME

NOTES ON OPERATING THE WATCH

●If the alarm has been set and the crown is pulled out to the second click, the ALARM

hands will turn to indicate the current time.

[MAIN TIME SETTING]

●When setting the hour hand, be sure to check that AM/PM is correctly set. The watch

is so designed that the date changes once in 24 hours.

●When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time

and then turn it back to the exact minute.

SETTING THE DATE

●It is necessary to adjust the date at the end of February and 30-day months.

●Do not set the date between 9:00 p.m. and 1:00 a.m., as the date may not change

properly.

●Do not press Button when the crown is at the first click position, as this will move the

ALARM hands.

●The single-time alarm cannot be set for a time more than 12 hours ahead of the current

time. While you keep Button pressed to advance the ALARM hands quickly, they stop

when they indicate the current time and the alarm is disengaged. In that case, release

Button, and then, press and hold Button again to set the ALARM hands to the desired

time.

Table des matières

Autres manuels Pulsar Montre

Pulsar

Pulsar W540 Manuel utilisateur

Pulsar

Pulsar W854 Manuel utilisateur

Pulsar

Pulsar 1N00 Manuel utilisateur

Pulsar

Pulsar VD84 Manuel utilisateur

Pulsar

Pulsar N021 Manuel utilisateur

Pulsar

Pulsar W866 Manuel utilisateur

Pulsar

Pulsar 5Y67 Manuel utilisateur

Pulsar

Pulsar VD51 Manuel utilisateur

Pulsar

Pulsar V657 Manuel utilisateur

Pulsar

Pulsar VR42 Manuel utilisateur

Pulsar

Pulsar VD59 Manuel utilisateur

Pulsar

Pulsar VD75 Manuel utilisateur

Pulsar

Pulsar W890 Manuel utilisateur

Pulsar

Pulsar PJU Series Manuel utilisateur

Pulsar

Pulsar V658 Manuel utilisateur

Pulsar

Pulsar 7T32 Manuel utilisateur

Pulsar

Pulsar 5Y67 Manuel utilisateur

Pulsar

Pulsar KINETIC 5M42 Manuel utilisateur

Pulsar

Pulsar KINETIC 5M62 Manuel utilisateur

Pulsar

Pulsar Z46H Manuel utilisateur

Pulsar

Pulsar VX82 Manuel utilisateur

Pulsar

Pulsar W880 Manuel utilisateur

Pulsar

Pulsar NX01 Manuel utilisateur

Pulsar

Pulsar NX11 Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur