Pulsar AWZ525 Manuel utilisateur

AWZ525

v.1.0

PC3

Time Relay Module

Edition: 1 from 02.03.2015

Replaces edition: -------------- EN**

The module’s features:

10 ÷ 14V DC power supply

extension of the trigger pulse for the time set

time range from 1 second to 5 min.

Relay output

Activated by plus "S +" or ground (minus) „S-„

Optical indication of power supply, triggering signal

and relay output status

Warranty - 2 years from the production date

CONTENTS.

1. General description

2. Components arrangement

3. Specifications

4. Operating modes

1. General description.

The PC3 time module is a transceiver that allows extending the trigger pulse for a short period of time set

by the potentiometer. The device can operate in two modes: extension of time activated by the pulse or by the

triggering signal loss. The range of the measured times is between 1s. - 5 minutes.

2. Components arrangement.

The figure below shows the arrangement of the most important components and connectors of the relay

module.

Fig.1. The view of the module.

Table 1. The description of components and connectors of the module.

3. Specifications

No.

[Fig.1]

Description

Connector:

+12V- - The module’s power supply, DC voltage

S+ - control input supplied by the positive power supply

S- - control input activated by the negative power supply (power supply minus)

–REL relay connector

CAUTION ! In Fig.1 the set of contacts shows a potential-free status of the relay.

LED (green): –optical indication

green –supply voltage

green –trigger signal indication (S + or S-)

red –The REL relay activation indication –(the LED is on when the relay is activated )

Operating mode jumper:

mode 1

mode 2

Description: jumper on, jumper on

Time range jumper:

1s –60s. time range

5s –5 min. time range

Description: jumper on, jumper on

Potentiometer for time adjustment

Relay

Supply voltage

10÷14V DC

Power consumption

5 mA/25 mA (inactive/active relay) (±5%)

S+ input

10÷14V DC control

S- input

0V (GND) control

Time range

Range 1: 1s ÷ 60s

Range 2: 5s ÷ 5 min

The number of relays

Maximum connection voltage

50V AC /30V DC

Maximum connection current

1 A

Maximum contact resistance

<100 mOhm

Optical indication of operation

LED light

Operation parameters

II environmental class,

-10°C - 40°C, relative humidity Rh=75%max. No condensation.

Dimensions

59 x 43 x 21 (WxHxD)

Mounting

mounting tape or dowel pins x2 (holes3mm)

Connectors

Ф0,51÷2,05 mm (AWG 24-12)

Net/gross weight

0,03 /0,05 [kg]

4. Operation modes.

The time module can operate in two modes:

- Mode 1 (jumper on)

- The triggering signal activates the relay. The system waits for a trigger signal loss. After the signal loss, the T

time countdown begins.

Once the countdown is finished, if no new triggering signal is generated, the relay will switch off.

If a triggering signal is generated during the T time countdown, the T time countdown will start with the S

triggering signal loss.

- Mode 2 (jumper off)

- The S triggering signal activates the relay for the T time period. If a triggering signal is longer than the T time,

the relay will switch off with the triggering signal loss.

Fig.2 Time diagrams of the module.

Pulsar

Siedlec 150, 32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-40, Fax (+48) 14-610-19-50

E-mail: [email protected], [email protected]

http:// www.pulsar.pl, www.zasilacze.pl

WARRANTY

Pulsar (the manufacturer) grants a two -year warranty for the

equipment, counted from the device’s production date.

WEEE LABEL

According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from

normal household waste. Waste electrical and electronic equipment must not be disposed of with normal household waste.

Table des matières

Autres manuels Pulsar Unité de contrôle

Pulsar

Pulsar MSR 1012 Manuel utilisateur

Pulsar

Pulsar EN54M Series Manuel utilisateur

Pulsar

Pulsar MSRK Series Manuel utilisateur

Pulsar

Pulsar MPSB48 Manuel utilisateur

Pulsar

Pulsar MPSB24 Manuel utilisateur

Pulsar

Pulsar MSRK 3024 Manuel utilisateur

Pulsar

Pulsar Moen INS270A Manuel utilisateur

Pulsar

Pulsar AWZ 12V/0,5A/M Manuel utilisateur

Pulsar

Pulsar MSR 2012 Manuel utilisateur

Pulsar

Pulsar AWZ516 Manuel utilisateur

Pulsar

Pulsar MSEP412V Manuel utilisateur

Pulsar

Pulsar MSR 1512 Manuel utilisateur

Pulsar

Pulsar MSEP412 Manuel utilisateur

Pulsar

Pulsar MSRK 2024 Manuel utilisateur

Pulsar

Pulsar MSRK 3012 Manuel utilisateur

Pulsar

Pulsar MSRD 1024 Manuel utilisateur

Pulsar

Pulsar MSRK 1024 Manuel utilisateur

Pulsar

Pulsar AWZ 523 Manuel utilisateur

Pulsar

Pulsar MPSB12 Manuel utilisateur

Pulsar

Pulsar PC2 AWZ 518 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur