PT SUPERJOY G1 Instructions
The following comes from the official User Manual
Operating the Camera
To begin remotely operating a camera, you will first need to use the Camera Select buttons to begin using
the
controller. Once selected, you will have full remote operation of the camera from the controller.
Pan, Tilt, and Zoom Operation
The controller supports variable speed pan / tilt / zoom control, which allows you to set the control speeds
prior
to use.
You can ad ust the control speed using the Speed Buttons located on the left of the LCD screen. Once the
control speeds are set to a comfortable value, you can use the oystick controller to move the camera.
In addition to the oystick itself, you can use the Fine Tune Zoom Dial to zoom in and out at the slowest
possible speed.
Setting and Recalling Presets
Using the Quick Presets you can set and call presets 0 - 9 using the Alpha-Numeric keypad by following
the
steps below.
Quick Presets:
1. Move the camera to the location you wish to set the preset.
2. Press and hold one of the Alpha-Numeric buttons for 3+ seconds to set the corresponding preset.
The controller OSD will notify you upon successfully storing a quick preset.
3. To call a Quick Preset, tap one of the Alpha-Numeric buttons.
Alternatively, you can use the Set and Call buttons to set or call presets 0 - 255.
Set and Call:
1. Move the camera to the location you wish to set the preset.
2. Press the [SET] button.
3. Using the Alpha-Numeric keypad, type in a preset number to associate with the preset. Press [ENTER]
to save the preset.
4. To call a preset, press the [CALL] button, and type in a preset number. Press the [ENTER] key to call
the preset.
When using a PTZOptics camera, you can call a preset at a specific focus value by setting the preset
while in manual focus mode.
Home Button
● Use the Home Button to send the camera to the Home position (facing forward).
17
Rev 1.3 3/21
Adjusting the Camera’s Image
There are many options for ad usting the camera’s image which we will detail below
You can ad ust White Balance & Exposure settings, Red & Blue Gain, Iris, Shutter, Focus, & Backlight
Compensation to achieve the desired image style and quality.
● White Balance Control: Use the [WHITE BALANCE MODE] button to cycle through the camera’s
White Balance modes. Options include: Indoor White Balance, Outdoor White Balance, One Push
White Balance, Manual White Balance, & Auto White Balance respectively.
You can use the [R GAIN / B GAIN] Knob to ad ust the Red & Blue Gain values.
Press the knob to toggle between Red Gain and Blue Gain. For ad ustment when in supporting White
Balance Modes.
The camera will automatically change to Manual White Balance upon twisting the R Gain / B Gain
Page 4
