2 Rev 1.2 6/16
1 Introduction
Thank you for using the PT-BRDCSTR Broadcast Camera Controller.
This manual introduces the installation, functions and operation of the PTZOptics PT-BRDCSTR-L (-E or –P) Broadcast Camera Controller. Prior to
installation and usage, please read this manual thoroughly.
Precautions
This product may only be used under specified conditions to avoid damage to the camera and the PT-BRDCSTR.
To prevent the risk of electric shock, never open the product housing. This is only to be performed by a qualified technician.
Do not exceed the specified limits for temperature, humidity or power.
Use only recommended accessories, otherwise malfunction or product damage may occur.
Always permanently mount the PT-BRDCSTR to a stable surface (e.g. wall, ceiling or Heavy Duty Tripod) before mounting the camera on
the PT-BRDCSTR to avoid damage to equipment.
Be sure to protect the power cord during installation and while in use.
Maximum specified combined camera/lens weights must not be exceeded on the camera mounting arm (side load: 11 lbs, top load: 6 lbs).
Do not manually operate the pan or tilt of the PT-BRDCSTR or it may cause permanent damage or malfunction.
When shutting down for short periods, the camera alone may be powered down. For long periods without disconnect power from the
PT-BRDCSTR.
Do not expose the PT-BRDCSTR to rain or moisture.
If necessary to clean the PT-BRDCSTR: be sure to disconnect the power first, do not use spray cleaners, do not use with abrasive cleaning
agents, use soft cloth (only dampened –not dripping) and a mild detergent only.
Please contact PTZOptics prior to using the PT-BRDCSTR if any of the following should occur：
oPower, control line is damaged.
oMains power is wrong type, voltage or frequency.
oUnit is dropped or has loose parts (internal or external).
oDevice appears to be functioning abnormally.
