protech SORADIO Manuel utilisateur
SORADIO
SORADIO
Installation instructions - Pages 2-15
529 VISTA BLVD 89434 SPARKS, NV - USA
Toll Free: 1-800-498-9662 / Phone: (775) 856-7333 / Fax: (775) 856-7658 Website: www.protechusa.com E-mail: [email protected]
EN
PROTECH SORADIO
1
PROTECH SORADIO
CONTENTS
1WIRING ............................................................................................................. 2
2SMARTPHONE APPLICATION ........................................................................ 3
2.1 Settings.............................................................................................................................. 4
2.2 Input status ........................................................................................................................ 4
2.3 Input settings ..................................................................................................................... 5
2.4 User settings...................................................................................................................... 5
2.5 Event log............................................................................................................................ 7
2.6 Network settings ................................................................................................................ 8
3RADIO CONFIGURATION ................................................................................ 9
3.1 Configuration using the CONNECT RADIO COORDINATOR ........................................... 9
3.2 Activate the radio on the SORADIO................................................................................. 11
4MAINTENANCE .............................................................................................. 12
5TECHNICAL SPECIFICATIONS ..................................................................... 12
6PRODUCT REFERENCES.............................................................................. 13
2
PROTECH SORADIO
1 WIRING
Note: All common inputs are connected together.
Example of input wiring:
The inputs are seen out of alarm when they are closed. They are seen in alarm when they are open
(Positive security).
* LEDs status L1, L2 et L3:
L1: green
Operating mode
OFF: Radio Mode
ON: RS485 Mode (unused in SORADIO)
LEDs active only if BLE
is activated after a short
press on the tamper
L2: orange
Radio configuration
status
Blinking: Radio mode not configured
ON: Radio mode configured
L3: red
BLE status
OFF: BLE deactivated
Blinking: BLE active waiting for connection
ON: BLE active connected to the application
Maximum length of 12V DC power supply cables:
(cable type SYT1 shielded)
∅Wire
Wire section
Maximum length of cables
0.6 mm
0.02 in
0.3 mm²
23 AWG
500 m
0.31 mi
0.9 mm
0.04 in
0.6 mm²
20 AWG
1124 m
0.7 mi
1.4 mm
0.06 in
1.5 mm²
16 AWG
2506 m
1.56 mi
Note: When using the same cable to supply power to several components, the indicated distances should be divided
by the number of connected components. When using several wires with the same section in parallel by
polarity, the indicated distances should be multiplied by the number of connected wires.
N° Terminals
Description
1
Input 1
2
Common
3
Input 2
4
Common
5
Input 3
6
Common
7
Input 4
8
Common
9
Input 5
10
Common
11
Input 6
12
Common
13
Input 7
14
Common
15
Input 8
16
Common
17
X
18
X
19
X
20
X
21
0V Power supply
22
+12V DC Power supply
E1
C
*
L1
L2
L3
3
PROTECH SORADIO
2 SMARTPHONE APPLICATION
Note: The smartphone application is compatible from Android 4.1 or higher.
1. Download the smartphone application “Sorhea Connect”.
2. Launch application “Sorhea Connect”.
Authorize activation of Bluetooth if requested to do so by the application.
3. Press the tamper switch very briefly (1s) to activate the BLE connection of the SORADIO.
Note: the connection remains active as long as the SORADIO is connected to the
smartphone application. It is deactivated when the cover is closed (tamper closed) or after
1 minute of inactivity (application closed).
4. Launch the search.
Sorhea Connect
Tamper SORADIO
4
PROTECH SORADIO
5. Click on the product found.
2.1 Settings
2.2 Input status
Note: It is possible to customize the name of an input.
Click on the name to change and Save.
Enter the module name:
Click on the name to change and Save
Setting the time on the module
Real-time input status
Legend:
No alarm
Alarm
Inactive
SORADIO found
Radio ID of the SORADIO found
identical to the sticker on the card.
5
PROTECH SORADIO
2.3 Input settings
Each input can be:
•Enable / disable input.
•Eject input.
To apply the changes, click Save.
Enable input
Input disabled
Input enabled
Eject input
Input not ejected
Input ejected
Note: It is only possible to eject an input if it is enable.
Input disable = Relay associated forced in alarm
Input ejected = Relay associated forced out alarm.
2.4 User settings
Managing user settings allows saving settings or applying settings to inputs: name and status of
inputs (activated, ejected).
2.4.1 Saving user configuration
Select Input
disable input
Eject input
Select “Save configuration”
Enter the name of the backup file
Click “SAVE”
Not used
6
PROTECH SORADIO
2.4.2 Applying an existing user setting
By default, the application offers the following setting options:
→SO-BEAM S RX (FR)
→SO-BEAM M/L/XL Mixed (FR)
→SO-BEAM M/L/XL TX (FR)
→SO-BEAM M/L/XL RX (FR)
→SO-BEAM M/L/XL TX (EN)
→SO-BEAM S RX (EN)
→SO-BEAM M/L/XL RX (EN)
→SO-BEAM M/L/XL Mixed (EN)
→MIRIS 3000/3100 CONNECT Sigle Direction (FR)
→MIRIS 3000/3100 CONNECT Double Direction (FR)
→COLIRIS II CONNECT Sigle Direction (FR)
→COLIRIS II CONNECT Double Direction (FR)
→MIRIS 3000/3100 CONNECT Sigle Direction (EN)
→MIRIS 3000/3100 CONNECT Double Direction (EN)
→COLIRIS II CONNECT Double Direction (EN)
→COLIRIS II CONNECT Sigle Direction (EN)
→8 INPUTS REMOTE MODULE default settings
Select the settings to load
Click on “Apply configuration”
7
PROTECH SORADIO
2.5 Event log
1. Click on Menu
2. Click on Event log
3. View event log
List of events:
−Alarm
−End Alarm
−Eject
−End eject
−BLE Connection
−Configuration
−Time setting
−Reset log event
−Power on
Menu
Event log
Input name
Type of events
Date/Time of the event
8
PROTECH SORADIO
2.6 Network settings
1. Click on Menu
2. Click Network settings
Menu
Network Settings
Default parameter unused in SORADIO
The black point "●" indicates that the SORADIO
has no assigned channel.
(configuration via
coordinator not done)
Indication that radio is active
Table des matières
Autres manuels protech Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
