Promise VTrak G1000 Manuel utilisateur

VTrak G-Class Series
Product Manual
Version 1.0
© 2014 PROMISE Technology, Inc. All Rights Reserved.

ii
VTrak G-Class Product Manual Promise Technology
Warning
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Warning
The electronic components within the server are sensitive
to damage from Electro-Static Discharge (ESD). Observe
appropriate precautions at all times when handling the server or its
subassemblies.
Warning
Turn off the power and disconnect the power cord before
servicing this device.

iii
Product Manual
Also included are four levels of notices:
Warning
A Warning noties you of probable equipment damage or loss of data, or the
possibility of physical injury, and how to avoid them.
Caution
A Caution informs you of possible equipment damage or loss of data and how to
avoid them.
Important
An Important message calls attention to an essential step or point
required to complete a task, including things often missed.
Note
A Note provides helpful information such as hints or alternative ways of
doing a task.

Contents
Introduction 1
Hardware 2
Front oF Vtrak G1000 2
Front Panel leDs3
rear oF Vtrak G1000 4
SpecificationS 6
Hardware Installation 9
Unpacking tHe Vtrak g1000 10
rack-moUnting tHe Vtrak g1000 11
network connectionS for naS 15
1g Lan port Link aggregation optionS 17
10G nas Client network setuP 19
two-switCh solution For 1G nas Client network 21
one-switCh solution For 1G nas Client network 23
connect to fibre cHanneL data network 25
connecting tHe power 27
power on SyStem 28
attaCh or remoVe Front bezel 29
Web-based Management 30
Login to webpam proe31
acceSS SetUp wizard33
usinG the setuP wizarD 33
Detail menu 39
setuP nas Gateway 42
nas Gateway mount Point 45
nas noDe 49
network settinGs For anoDe 51
oPen DireCtory authentiCation For nas Clients 52
Upgrading firmware in tHe naS gateway 53

IntroduCtIon
The VTrak G1000 NAS Gateway provides universal access to the VTrak A-Class managed SAN without the need
to deploy costly Fibre Channel SAN connections to every client system. This way, Fibre Channel data connections
can be used only for clients that require an extremely high performance SAN. But the same data assets can still
be used by Ethernet connected NAS clients that have no need for high IO performance. Data remains safely on
the VTrak A-Class SAN available for high demand clients connected so there is no need to create two separate
storage environments.
VTrak A-Class SAN, VTrak G1000 NAS Gateway and 10G NAS Client Network
1
Introduction

Hardware
The following section provides a summary of the front and back panel hardware features of the VTrak Class A
Series enclosures.
Front oF Vtrak G1000
The Vtrak G1000 enclosure features screw on each side used to secure the enclosure to an equipment rack. A
lockable ventilated bezel cover provides physical security.
USB ports
2 x USB 3.0
VGA port
VTrak G1100 front view
Gigabit LAN LEDs
Message LED
SSD Access LED
Default setting button
Locate LED
Power button/LED
SSD disk carriers
2
VTrak G-Class Product Manual Promise Technology

Feature Description (refer to product manual for more details)
Gigabit LAN LEDs Lights when a valid link is established on the corresponding Gigabit LAN port
(from left to right, ports 4-1), blinks when there is activity on the port.
Message LED Indicates a hardware event.
SSD Access LED Lights when there is read/write activity on the SSDs.
Power button/LED Press this to power on the system. This lights when the system is powered on.
Locate LED Normally dark. Lights when the location feature is triggered.
Default setting
button
Press to return system conguration to default settings.
USB ports Two USB 3.0 ports.
VGA port VGA (DB15) port for monitor connection.
SDD disk drive
carriers
Two SSD drives are installed. Each drive carrier has a Status LED
(uppermost) and Activity LED (lowermost) on the right front side.
Front Panel leDs
3
Introduction

rear oF Vtrak G1000
All network and power connections are located on the rear panel of the VTrak G1000.
VTrak G1000 back view
1 Gigabit LAN
ports
(4 x 1GbE)
USB ports
2 x USB 2.0 (left)
2 x USB 3.0 (right)
VGA port
(not used)
Power socket
PSU1 Power socket
PSU2
PS/2 port (not used)
1GbE port (not used)
10 Gigabit LAN ports
2 x 10GbE
Fibre Channel ports
2 x SPF
PSU Status LEDs
4
VTrak G-Class Product Manual Promise Technology

Feature Description (refer to product manual for more details)
PSU Status LEDs Lights green when PSU is functioning normally. Lights red when PSU has
a problem.
Power Supply sockets Connect both power supplies using power cords shipped with the NAS
Gateway.
USB ports Two USB 2.0 ports (left) and two USB 3.0 ports (right).
10 Gigabit LAN ports Two 10 Gigabit LAN ports. Connect to 10G Ethernet switch for physical
connection to NAS clients. LED indicators above each port are Link/
Activity on left, and Speed on right. Green Speed indicator = 1 Gbps,
Amber = 10 Gbps
Gigabit LAN ports Four 1 Gigabit LAN ports. Connect to 1G Ethernet switch for physical
connection to VTrak A-Class metadata and management network. LED
indicators above each port are Link/Activity on left, and Speed on right.
Amber Speed indicator = 100 Mbps Green = 1 Gbps
Fibre Channel ports SFP ports for Fibre Channel data channel. Connect to FC switch or
directly to VTrak A-Class controller.
5
Introduction

speCIfICatIons
VTrak G1000 Series Hardware
Memory
Four DIMM slots
DDR3 Non-ECC UDIMM, ECC UDIMM, 1333/1600 MHz (2 DPC)
Capacity: Up to 32 GB Sizes: 1GB, 2GB, 4GB, 8GB
Ports
Two 10 Gigabyte Ethernet
Four 1 Gigabyte Ethernet
Two 8 Gigabyte Fibre Channel
I/O Connectors
4 x USB 3.0 ports (2 front, 2 rear)
2 x USB 2.0 ports (2 rear)
2 x VGA ports (1 front, 1 rear)
Power Supply 1+1 Redundant 450W 80PLUS Gold Power Supply
Voltage
AC Input Voltage: 90V ~ 264V
AC Input Frequency: 47Hz ~ 63Hz
Maximum Current
Maximum Output Power: 450W
Max DC Output Current of 12V: 37A
Max DC Output Current of 5VSB: 2A
Power Conversion
Efciency
20% of max loading: 88%
50% of max loading: 92%
100% of max loading: 88%
6
VTrak G-Class Product Manual Promise Technology
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Porte populaires d'autres marques

LST
LST M500RFE-AS Manuel utilisateur

Kinnex
Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey
Telsey CPVA 500 - SIP Manuel utilisateur











