PROCET PT-PIS4PB1S-M Manuel utilisateur
ＰＴ－ＰＩＳ４ＰＢ１Ｓ－Ｍ ＰｏＥ Switch
ｗｗｗ．ｐｒｏｃｅｔｐｏｅ．ｃｏｍ
Ｑｕｉｃｋ Ｉｎｓｔａｌｌａｔｉｏｎ Ｇｕｉｄｅ
Ｄｅｃｌａｒａｔｉｏｎ
Ｄｅｃｌａｒａｔｉｏｎ
The symbol indicates that the product should not be discarded as
unsorted waste but must be sent to separate collection facilities for recovery
Copyright©2022 Creative Lianjie Network Technology Co.Ltd
This document belongs to PROCET company. It is not allowed to reproduce
and modify without the original author's permission. It is PROCET's policy to
improve its products as new technology, components, software, and firmware
at any time. PROCET, therefore, reserves the right to change specifications
without prior notice. Please follow WEEE (Waste Electrical and Electronic
Equipment) disposal instructions for old electronic products. Please do not
dispose of the old product in your general household waste bin.
All rights reserved.
and recycling.
Ｏｖｅｒｖｉｅｗ
Ｏｖｅｒｖｉｅｗ
Ｆｏｒ Ｗｈｏｍ
Network Engineers
Network Administrators
The installation Guide for PT-PIS4PB1S-M and mainly introduces the hardware
specification, installation methods, and precautions of the installation.
There may be differences in the appearance and configuration from other
models. All product images in this manual are for illustration purposes only
and may differ from the actual product.
This manual includes the following chapters:
1. Product Introduction. Including the basic functions and specification of
PT-PIS4PB1S-M, as well as the product appearance and applications
introduction.
2. Installation Introduction. Introducing the preparation work and
precautionsbefore installing the product.
3. Product Installation. Two methods of product installation.
Field Technicians
２．１ Ｐａｃｋａｇｅ ｃｏｎｔｅｎｔｓ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０６
２．２ Installation tookit．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０６
２．３ Inspection
１．１ Ｉｎｔｒｏｄｕｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
１．２ Ａｐｐｅａｒａｎｃｅ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
１．３ Ｓｐｅｃｉｆｉｃａｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０３
１．４ Management Interface
Ｔａｂｌｅ ｏｆ ｃｏｎｔｅｎｔｓ
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０４
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０６
Ｔａｂｌｅ ｏｆ Ｃｏｎｔｅｎｔｓ
１．Ｉｎｔｒｏｄｕｃｔｉｏｎ 01
２．Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ 06
３．１ Installing in waterproof case．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０８
３．２ Connection．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１０
３．３ Grounding．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１０
３．４ Inspection．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１２
３．Ｉｎｓｔａｌｌａｔｉｏｎ 08
Ｉｎｔｒｏｄｕｃｔｉｏｎ ０１
１． Ｉｎｔｒｏｄｕｃｔｉｏｎ
１．１ Ｉｎｔｒｏｄｕｃｔｉｏｎ
１．２ Ａｐｐｅａｒａｎｃｅ
Ｕｐｐｅｒ Ｖｉｅｗ
PT-PIS4PB1S-M, an industrial 4-port PoE switch with Managed Ethernet
function. Supports IEEE 802.1Q VLAN and port-based VLAN. We can access
and manage the device via web browser, including IP configuration, port
configuration, VLAN configuration, PoE configuration, factory reset, etc. We
can also view device information, such as switch status, port status, PoE
status, etc. In addition, the PoE port enables remote control of the
device' on/off.
Equipped detecting chip inside which will make the PoE identification
handshake with IEEE802.3af/at/bt PDs.Such as PTZ cameras, wireless APs,
base stations, and other PoE-powered devices which need high power watts.
Protecting non-PoE powered devices. Each PoE output port delivers 1.75A
up to 90W(max) power for remote PDs over 4 pairs.
One fiber slot only supports 1000Mbps of optical module, while RJ45
copper port supports 10/100/1000Mbps. Enclosed in an IP40 high-impact
metal case with a DIN Rail mount bracket, designed for indoor use but can
work outdoors by covering it with a waterproof case. It works with an input
voltage of 48-57Vdc and operates under -40°to +65°. For planning
purposes, the effective distance is 100 meters over Cat5/5e/6 cables.
1-1 Upper View
ＤＣ Ｉｎｐｕｔ Ｐｏｒｔ
ＤＩＮ Ｒａｉｌ Ｂｒａｃｋｅｔ
ＧＮＤ Ｔｅｒｍｉｎａｌ
１－２
０２ Ｉｎｔｒｏｄｕｃｔｉｏｎ
Ｓｉｄｅ Ｖｉｅｗ
１－３ Ｆｒｏｎｔ Ｖｉｅｗ
Ｓｉｄｅ Ｖｉｅｗ
Ｆｒｏｎｔ Ｖｉｅｗ
Ｄａｔａ Ｉｎｄｉｃａｔｏｒ
ＳＦＰ Ｉｎｐｕｔ Ｐｏｒｔ
ＤＣ Ｐｏｗｅｒ Ｉｎｄｉｃａｔｏｒ
ＰｏＥ Ｏｕｔｐｕｔ Ｐｏｒｔ
ＰｏＥ Ｌｏａｄ Ｉｎｄｉｃａｔｏｒ
ＳＦＰ Ｉｎｄｉｃａｔｏｒ
Ｉｎｔｒｏｄｕｃｔｉｏｎ ０３
１．３ Ｓｐｅｃｉｆｉｃａｔｉｏｎ
ＰｏＥ Ｌｏａｄ
Ｉｎｄｉｃａｔｏｒ
Green
Ｄａｔａ
Ｉｎｄｉｃａｔｏｒ
Yellow
Ｉｔｅｍｓ Ｓｔａｔｕｓ
Ｓｏｌｉｄ Light
Ｆｌａｓｈｉｎｇ Light
Ｓｏｌｉｄ Light
Ｆｌａｓｈｉｎｇ Light
Light Ｏff
Detecting PD
If flashing all the time, the PD may not
PoE Switch is powered off/defective
PoE Ｉｎｄｉｃａｔｏｒ Ｄｉｓｐｌａｙ：
.
Data is being transferred.
Data available(Normal).
be 802.3af/at/bt standard.
PD is powered( Default/Normal ).
Ｄｅｓｃｒｉｐｔｉｏｎ
Items
Ｉｎｐｕｔ
Ｄe
ＩＥＥＥ８０２．３ａｆ／ａｔ／ｂｔ
PoE Standard
４６－５７Ｖｄｃ １．７５Ａ, Each Port： ９０Ｗ（Ｍａｘ）
４／５（＋）， ７／８（－） ＆ ３／６（＋）， １／２（－）
ｓｃｒｉｐｔｉｏｎ
ＰｏＥ Ｓｕｒｇｅ Ｐｒｏｔｅｃｔｉｏｎ
Ｏｕｔｐｕｔ
Ｐｏｗｅｒ Ｐｉｎｓ
５％－９５％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
Ｕｐ ｔｏ ５０００ ｍｅｔｅｒｓ
－４０℃－７０℃
１０％－９０％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
ＩＥＥＥ８０２．３ｉ ／ ＩＥＥＥ８０２．３ｕ ／ ＩＥＥＥ８０２．３ａｂ ／ ＩＥＥＥ８０２．３ｚ
ＲＪ４５：１０／１００／１０００Ｍｂｐｓ ＳＦＰ:
１４４．５ｍｍ×９５ｍｍ×３５．４ｍｍ（４８３ｇ）
１Ｇ
ＣＥ ＦＣＣ
ＩＰ４０
Ｎｅｔｗｏｒｋ Ｐｒｏｔｏｃｏｌ
Data Speed
ＩＰ Ｒａｔｅｄ
Ｒｅｇｕｌａｔｏｒｙ Ｃｏｍｐｌｉａｎｃｅ
Ｄｉｍｅｎｓｉｏｎｓ & NW
４８－５７Ｖｄｃ ７．５Ａ
ＥＮ ５５０３２:２０１５／Ａ１１:２０２０
ＥＮ ５５０３５:２０１７／Ａ１１:２０２０
ＥＭＣ
Storage Humidity
Storage Temp.
Operating Altitude
Operating Humidity
Work Temp. －４０℃ ｔｏ ６５℃
Protected line:1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6kV
Differential mode surge protection (10/700us): 1.5KV
０４ Ｍａｎａｇｅｍｅｎｔ Ｉｎｔｅｒｆａｃｅ
When all network connection is completed, run web browser on the
computer, type in the address field, for example, 192.168.1.151, then
press ENTER for opening the login page. Log into the system with a
username and password. The login page is displayed in the below pic.
Caution: Make sure the computer must be set on the same IP subnet
address as the PoE managed switch. Such as 192.168.1.*
1.4 Web
After entering the username and password, the main screen appears as
below figure.
There are Switch Menu on the left of the web page, including System
Information, IP Address, Account Information, Port, VLAN, PoE, Reset
configuration, and Reboot.
Ｍａｎａｇｅｍｅｎｔ
Ｍａｎａｇｅｍｅｎｔ Ｉｎｔｅｒｆａｃｅ ０５
The current device supports VLAN segmentation function. Users can
flexibly segment the VLAN according to demand.
This Page supports the PoE configuration function, disables or
enables PoE port, displays per PoE port power consumption, voltage,
current, and Class level information.
０６ Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
２．１ Ｐａｃｋａｇｅ ｃｏｎｔｅｎｔｓ
２．２ Ｉｎｓｔａｌｌａｔｉｏｎ ｔｏｏｌｋｉｔ
Ｔｈｅｓｅ ｔｏｏｌｓ ｍａｙ ｂｅ ｎｅｅｄｅｄ ｄｕｒｉｎｇ ｅｑｕｉｐｍｅｎｔ ｉｎｓｔａｌｌａｔｉｏｎ， ａｎｄ
ｓｈｏｕｌｄ ｂｅ ｐｒｅｐａｒｅｄ ｂｙ ｙｏｕｒｓｅｌｆ： ｌｅｖｅｌ ｒｕｌｅｒ， ｍａｒｋｉｎｇ ｐｅｎ， ｃｒａｆｔ ｋｎｉｆｅ，
ｗｉｒｅ ｓｔｒｉｐｐｅｒ， ｎｅｔｗｏｒｋ ｐｌｉｅｒｓ， ｉｍｐａｃｔ ｄｒｉｌｌ，ｄｉｆｆｅｒｅｎｔ ｍａｔｃｈｉｎｇ ｄｒｉｌｂｉｔｓ，
ｒｕｂｂｅｒ ｈａｍｍｅｒ， ｃｒｏｓｓ ｓｃｒｅｗｄｒｉｖｅｒ， ｗｒｅｎｃｈ， ｌａｄｄｅｒ， ｅｔｃ．
２．３ Ｉｎｓｐｅｃｔｉｏｎ
２．３．１ Ｃｏｎｎｅｃｔ ｔｈｅ ｄｅｖｉｃｅ ｔｏ ａ ＤＣ Ｐｏｗｅｒ Ｓｙｓｔｅｍ ａｎｄ ｃｈｅｃｋ ｔｈｅ ＰＷＲ ＬＥＤ
ｔｏ ｅｎｓｕｒｅ ｐｒｏｐｅｒ ｆｕｎｃｔｉｏｎ ｂｅｆｏｒｅ ｉｎｓｔａｌｌａｔｉｏｎ．
２．３．２ Ｃｏｎｎｅｃｔ ｔｈｅ ＰｏＥ ｐｏｒｔ ｔｏ ｔｈｅ ＰｏＥ ｐｏｗｅｒｅｄ ｄｅｖｉｃｅ（ＰＤ）． Ｓｕｃｈ ａｓ
ｔｈｅ ＩＰ Ｃａｍｅｒａｓ ｏｒ Ｗｉｒｅｌｅｓｓ ＡＰｓ．
Ａｓ ｓｈｏｗｅｄ ｉｎ Ｆｉｇｕｒｅ ２－１；
Ｃａｕｔｉｏｎ：
Ｐｌｅａｓｅ ｕｓｅ ＰｏＥ ｐｏｗｅｒｅｄ ｄｅｖｉｃｅ（ＰＤ） ｔｈａｔ ｃｏｍｐｌｉｅｓ ｗｉｔｈ
ＩＥＥＥ８０２．３ａｆ／ａｔ／ｂｔ／ＰｏＥ＋＋ ｔｏ ｃｏｎｎｅｃｔ ｔｈｉｓ ｐｒｏｄｕｃｔ．
!
Ｇｒｏｕｎｄ
ｌｕｇ Ｗｉｒｅ＆ ２．５
ＰＴ－ＰＩＳ４ＰＢ１Ｓ－Ｍ Ｏｐｅｒａｔｉｏｎ Ｍａｎｕａｌ
ｓｃｒｅｗ
Ｏｐｅｎ ｔｈｅ ｂｏｘ ｏｆ ｔｈｅ ＰＴ－ＰＩＳ４ＰＢ１Ｓ－Ｍ ａｎｄ ｃａｒｅｆｕｌｌｙ ｕｎｐａｃｋ ｉｔ， ｔｈｅ
ｂｏｘ ｓｈｏｕｌｄ ｃｏｎｔａｉｎ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｉｔｅｍｓ：
Autres manuels pour PT-PIS4PB1S-M
1
Autres manuels PROCET Changer
