PROCET EN-S4P Manuel utilisateur
ＥＮ－Ｓ４Ｐ ＰｏＥ Ｓｗｉｔｃｈ
ｗｗｗ．ｐｒｏｃｅｔｐｏｅ．ｃｏｍ
Ｑｕｉｃｋ Ｉｎｓｔａｌｌａｔｉｏｎ Ｇｕｉｄｅ
This document belongs to PROCET company. It is not allowed to reproduce
and modify without the original author's permission. It is PROCET's policy
to improve its products as new technology, components, software, and
firmware at any time. PROCET, therefore, reserves the right to change
specifications without prior notice.Please follow WEEE (Waste Electrical and
Electronic Equipment) disposal instructions for old electronic products.
Please do not dispose of the old product in your general household waste
bin.
The symbol indicates that the product should not be discarded as
unsorted waste but must be sent to separate collection facilities for
recovery and recycling.
Ｄｅｃｌａｒａｔｉｏｎ
Ｄｅｃｌａｒａｔｉｏｎ
Copyright ©2023Creative Lianjie Network Technology Co.Ltd
All rights reserved.
Ｏｖｅｒｖｉｅｗ
Ｎｅｔｗｏｒｋ Eｎｇｉｎｅｅｒｓ
Ｎｅｔｗｏｒｋ Aｄｍｉｎｉｓｔｒａｔｏｒｓ
Ｆｉｅｌｄ Ｔｅｃｈｎｉｃｉａｎ
Ｔｈｅ ｉｎｓｔａｌｌａｔｉｏｎ Ｇｕｉｄｅ ｆｏｒ ＥＮ－Ｓ４Ｐ ａｎｄ ｍａｉｎｌｙ ｉｎｔｒｏｄｕｃｅｓ ｔｈｅ ｈａｒｄｗａｒｅ
ｓｐｅｃｉｆｉｃａｔｉｏｎ， ｉｎｓｔａｌｌａｔｉｏｎ ｍｅｔｈｏｄｓ， ａｎｄ ｐｒｅｃａｕｔｉｏｎｓ ｏｆ ｔｈｅ ｉｎｓｔａｌｌａｔｉｏｎ．
Ｔｈｅｒｅ ｍａｙ ｂｅ ｄｉｆｆｅｒｅｎｃｅｓ ｉｎ ｔｈｅ ａｐｐｅａｒａｎｃｅ ａｎｄ ｃｏｎｆｉｇｕｒａｔｉｏｎ ｆｒｏｍ ｏｔｈｅｒ
ｍｏｄｅｌｓ． Ａｌｌ ｐｒｏｄｕｃｔ ｉｍａｇｅｓ ｉｎ ｔｈｉｓ ｍａｎｕａｌ ａｒｅ ｆｏｒ ｉｌｌｕｓｔｒａｔｉｏｎ ｐｕｒｐｏｓｅｓ
ｏｎｌｙ ａｎｄ ｍａｙ ｄｉｆｆｅｒ ｆｒｏｍ ｔｈｅ ａｃｔｕａｌ ｐｒｏｄｕｃｔ．
Ｔｈｉｓ ｍａｎｕａｌ ｉｎｃｌｕｄｅｓ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｃｈａｐｔｅｒｓ：
１． Ｐｒｏｄｕｃｔ Ｉｎｔｒｏｄｕｃｔｉｏｎ． Ｉｎｃｌｕｄｉｎｇ ｔｈｅ ｂａｓｉｃ ｆｕｎｃｔｉｏｎｓ ａｎｄ ｓｐｅｃｉｆｉｃａｔｉｏｎ ｏｆ
ＥＮ－Ｓ４Ｐ， ａｓ ｗｅｌｌ ａｓ ｔｈｅ ｐｒｏｄｕｃｔ ａｐｐｅａｒａｎｃｅ ａｎｄ ａｐｐｌｉｃａｔｉｏｎｓ ｉｎｔｒｏｄｕｃｔｉｏｎ．
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｉｎｔｒｏｄｕｃｔｉｏｎ． Ｉｎｔｒｏｄｕｃｉｎｇ ｔｈｅ ｐｒｅｐａｒａｔｉｏｎ ｗｏｒｋ ａｎｄ
ｐｒｅｃａｕｔｉｏｎｓ ｂｅｆｏｒｅ ｉｎｓｔａｌｌｉｎｇ ｔｈｅ ｐｒｏｄｕｃｔ．
３． Ｐｒｏｄｕｃｔ Ｉｎｓｔａｌｌａｔｉｏｎ．
s
Ｏｖｅｒｖｉｅｗ
Ｆｏｒ Ｗｈｏｍ
Ｔａｂｌｅ ｏｆ ｃｏｎｔｅｎｔｓ
１．１ Ｉｎｔｒｏｄｕｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
１．２ Appearance．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
１．３ Specification．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０３
２．１ Ｐａｃｋａｇｅ ｃｏｎｔｅｎｔｓ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０４
２．２ Ｉｎｓｐｅｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０４
Ｔａｂｌｅ ｏｆ Ｃｏｎｔｅｎｔｓ
１． Ｉｎｔｒｏｄｕｃｔｉｏｎ 01
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ 04
３．１ Ｉｎｓｐｅｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０６
３． Ｉｎｓｔａｌｌａｔｉｏｎ 06
Ｉｎｔｒｏｄｕｃｔｉｏｎ ０１
１． Ｉｎｔｒｏｄｕｃｔｉｏｎ
１．１ Ｉｎｔｒｏｄｕｔｉｏｎ
１．２ Ａｐｐｅａｒａｃｅ
Ｕｐｐｅｒ Ｖｉｅｗ
EN-S4P is a 4-port Gigabit PoE switch with an uplink RJ45 LAN data port, can
deliver power and transmit data to 4 802.3af/at PDs simultaneously, total
power budget is 60W. Come with an AC to DC power supply at Level 6
energy efficiency. Good heat dissipation with ventilation holes to ensure
long-term stable operation.
１－１ Ｕｐｐｅｒ Ｖｉｅｗ
Ｃｏｏｌｉｎｇ ｈｏｌｅ
１－２
０２ Ｉｎｔｒｏｄｕｃｔｉｏｎ
Ｓｉｄｅ Ｖｉｅｗ
１－３ Ｆｒｏｎｔ Ｖｉｅｗ
Ｓｉｄｅ Ｖｉｅｗ
Ｆｒｏｎｔ Ｖｉｅｗ
Ｄａｔａ IｎｄｉｃａｔｏrＰｏＥ Ｏｕｔｐｕｔ
Ｐｏｒｔ
ＤＣ Ｉｎｐｕｔ Ｐｏｒｔ
Ｄａｔａ Ｉｎｄｉｃａｔｏｒ
Unused
ＬＡＮ Ｉｎｐｕｔ Ｐｏｒｔ
ＰｏＥ ＬｏａdＩｎｄｉｃａｔｏｒ
Ｉｎｔｒｏｄｕｃｔｉｏｎ ０３
１．３ Ｓｐｅｃｉｆｉｃａｔｉｏｎ
Items
Ｐｏｗｅｒ Ｉｎｐｕｔ
ＬＡＮ Ｉｎｐｕｔ：ＲＪ４５ Ｅｔｈｅｒｎｅｔ
Ｄａｔａ Ｉｎｐｕｔ
802.3af/at, 30W(max)*4 Ports, total 60W
３／６（＋）， １／２（－）
Ｄｅｓｃｒｉｐｔｉｏｎ
Ｏｕｔｐｕｔ
ＰｏＥ Ｐｏｗｅｒ Ｐｉｎｓ
Ｗｏｒｋ Ｔｅｍｐ．
Ｏｐｅｒａｔｉｎｇ Ｈｕｍｉｄｉｔｙ
Ｏｐｅｒａｔｉｎｇ Ａｌｔｉｔｕｄｅ
Ｓｔｏｒａｇｅ Ｔｅｍｐ．
Ｓｔｏｒａｇｅ Ｈｕｍｉｄｉｔｙ
０℃ ｔｏ ４０℃
２０％ ｔｏ ８０％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
Ｕｐ ｔｏ ２０００ ｍｅｔｅｒｓ
－２０℃ ｔｏ ７０℃
１０％ ｔｏ ９０％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
ＩＥＥＥ８０２．３ｉ ／ ＩＥＥＥ８０２．３ｕ ／ ＩＥＥＥ８０２．３ａｂ
１１６．４ｍｍ Ｘ ７１．３ｍｍ Ｘ ３０．５ｍｍ （１５１．３ｇ）
ＲＪ４５:１０／１００／１０００Ｍｂｐｓ
ＣＥ
ＩＰ２０
Ｎｅｔｗｏｒｋ Ｐｒｏｔｏｃｏｌ
Data Speed
ＩＰ Ｒａｔｅｄ
Ｒｅｇｕｌａｔｏｒｙ Ｃｏｍｐｌｉａｎｃｅ
Ｄｉｍｅｎｓｉｏｎｓ & NW
ＤＣ Ｉｎｐｕｔ：５５Ｖｄｃ １．１Ａ
ＥＮ ５５０３２:２０１５／Ａ１１:２０２０
ＥＮ ５５０３５:２０１７／Ａ１１:２０２０
ＥＭＣ
ＰｏＥ Ｌｏａｄ
Ｉｎｄｉｃａｔｏｒ
Green
Ｉｔｅｍｓ Ｓｔａｔｕｓ
Ｓｏｌｉｄ Light
Light Off
Light Off
Ｆｌａｓｈｉｎｇ Light
Light Ｏff
Ｉｎｄｉｃａｔｏｒ Ｄｉｓｐｌａｙ：
PoE Switch is powered off/defective.
No Data transmission
No connection to PD
PD is powered(Default/Normal)
Ｄｅｓｃｒｉｐｔｉｏｎ
Ｄａｔａ ａｖａｉｌａｂｌｅ（Ｎｏｒｍａｌ）
Ｄａｔａ
Ｉｎｄｉｃａｔｏｒ
Yellow
０４ Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
2.1 Package Contents
２．２ Ｉｎｓｐｅｃｔｉｏｎ
Ｃａｕｔｉｏｎ：
Ｐｌｅａｓｅ ｕｓｅ ＰｏＥ ｐｏｗｅｒｅｄ ｄｅｖｉｃｅ（ＰＤ） ｔｈａｔ ｃｏｍｐｌｉｅｓ ｗｉｔｈ
ＩＥＥＥ８０２．３ａｆ／ａｔ ｔｏ ｃｏｎｎｅｃｔ ｔｈｉｓ ｐｒｏｄｕｃｔ． Can not feed
non-802.3af/at standard PD, nor 24Vdc PD.
!
ＥＮ－Ｓ４Ｐ Ｏｐｅｒａｔｉｏｎ ｍａｎｕａｌ AC to DC Power Supply Adapter
Ｏｐｅｎ ｔｈｅ ｂｏｘ ｏｆ ｔｈｅ ＥＮ－Ｓ４Ｐ ａｎｄ ｃａｒｅｆｕｌｌｙ ｕｎｐａｃｋ ｉｔ， ｔｈｅ ｂｏｘ
ｓｈｏｕｌｄ ｃｏｎｔａｉｎ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｉｔｅｍｓ：
2.2.1 Connect the device to the AC to DC power supply, the power
cable is 1.5 meters with DC barrel jack at 5.5*2.1mm.
2.2.2 Connect the PoE port to the PoE powered device(PD). Such as
the IP Cameras or Wireless APs.
As showed in Figure 2-1；
２－１
Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ ０５
Ｄｅｖｉｃｅ Ｃｏｎｎｅｃｔｉｏｎ
!
Ｓｗｉｔｃｈ
Ｄａｔａ Ｉｎｐｕｔ
ＰｏＥ Ｄａｔａ＆ Ｐｏｗｅｒ
Ｏｕｔｐｕｔ
ＤＣ
Ｐｏｗｅｒ Ｉｎｐｕｔ
ＥＮ－Ｓ４Ｐ
PD
Caution:
1. Please read the instructions carefully and follow the standard operating
procedures before using.
2. Please place it in a well-ventilated and dry area, and it is for indoor use only.
3. Connect the AC to DC power supply adapter cable with DC barrel jack into the
rear of the Procet PoE switch. On the other end of the power cable plug into a
standard grounded wall outlet for safety.
4. Connect a CAT5/5e/6 cable with the RJ45 connector into the RJ45 socket labeled
PoE 1,PoE2, PoE3 and PoE4. On the other end of the CAT5e/6 cable,connect to your
PoE powered Device (PD, such as IP Cameras etc). The total Ethernet cable length
can not exceed 100 meters.
5. The device must be placed on a stable surface, preferably affixed and
mounted permanently. Do not leave it "dangling" and use plugged-in cables in
tension as support. Drops, falls, and impacts experienced by the injector can
compromise the internal components & cause premature failure.
6. Do not place heavy objects on top of this injector. Allow at least 5cm of
clearance on all sides of the device for heat ventilation / natural convection.
０６ Ｉｎｓｔａｌｌａｔｉｏｎ
３． Ｉｎｓｔａｌｌａｔｉｏｎ
Ｃａｕｔｉｏｎ：
If it is placed in an outdoor environment, please install the device
in a waterproof case with a height of 45cm if possible.
Ｗａｔｅｒｐｒｏｏｆ Ｅｔｈｅｒｎｅｔ ｃａｂｌｅｓ ｓｈｏｕｌｄ ｂｅ ｗｉｔｈ ａ ｐｒｏｔｅｃｔｉｖｅ ｓｈｅａｔｈ．
ＣＡＴ５ｅ／６ ｃａｂｌｅｓ ａｒｅ ｒｅｃｏｍｍｅｎｄｅｄ．
!
３．１ Ｉｎｓｐｅｃｔｉｏｎ
Inspect the installed equipment before putting it into operation：
· Make sure the PD is compliant with our product.
· Make sure the Ethernet cable connection is correct.
Make sure all connections are correct, and turn on the power,
inspect all the indicators.
Autres manuels PROCET Changer
