PROAIM P-OHCP-02 Manuel utilisateur
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
4 Versale Overhead Camera Plaorm System (P-OHCP-02)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2 x Pole Stands
What’s In The Box
2 x Telescopic Poles
6 x 300mm Male Rods
2 x 300mm Female Rods
2 x Accessory Clamps
2 x Pole Connectors
2 x Female Caps
Center Bar with adjustable
camera mount
2 x Knobs
2
2 x Backdrop Brackets
iPhone Adapter
2 x Plasc Clips BS100 1 x 3/16” L-Type Allen key
1 x 4mm T-Type Allen key
3
INDEX
Sr. No Particulars Page No.
1. 4 Versale Overhead Camera Setup 4
2. Telescopic Poles & Pole Stand Assembly 4
3. Height Adjustment 4-5
4. Pole Connector Assembly 5
5. Male & Female Rods Assembly 5
6. Center Bar Assembly 6
7. Accessory Clamps Assembly 6-7
8. Backdrop Brackets Assembly 7-8
9. Center Bar Posioning 8
10. Center Bar Height Adjustment 8
11. Camera Setup 9
12. iPhone Adapter Assembly 9-10
13. BS100 Mounng 10
14. Final Setup 11
4
4 Versale Overhead Camera Setup
• Insert the telescopic pole into the pole stand.
• Aer inserng the pole stand, ghten the
knob on the boom side of the telescopic
pole.
• Repeat the same process for inserng the
second telescopic pole into the pole stand.
• Loosen the knob on the pole stand and adjust
the height per your requirement and
re-ghten the knob.
Telescopic Poles & Pole Stand Assembly
Height Adjustment
• Aer adjusng the height, use the 3/16” Allen
Key to ghten the knob securely.
• Repeat the same process for height
adjustment of the second pole.
• To adjust the pole stand, you can loosen or
ghten its knobs.
5
• Loosen the bolt of the pole connector using a
4mm T-Type Allen key and mount it on the
pole stand.
• Aer mounng the pole connector, re-ghten
the bolt.
• Repeat the same process for the second pole
connector.
• Adjust the posion of the pole stand per your
requirement.
Pole Connector Assembly
• Insert the two 300mm male rods into the
300mm female rods and ghten them
securely.
• Repeat the same process for inserng the
remaining rods.
NOTE: Add or remove the rods per your
requirement.
Male & Female Rods Assembly
6
• Loosen the side knob of the Center Bar and
insert the rod.
• Insert both side knobs into the Center Bar.
• Aer inserng the rod, securely ghten the
knob.
Center Bar Assembly
• Loosen the knob of the Accessory Clamp and
insert the rods into it.
• Repeat the same process for inserng the
second rod.
Accessory Clamps Assembly
7
• Aer inserng the rods, ghten the knob
securely.
• Loosen both knobs of the pole connector and
insert both rods with clamp accessory into the
pole connector, as shown in the image.
• Aer inserng the rods, re-ghten the pole
connector knobs.
• Repeat the same process for inserng the
other end of the rods into the pole connector.
• Insert female caps onto the ends of male rods
and ghten them securely.
• Similarly, insert female caps to the other side
of the rods.
• Remove the top knob from the accessory
clamp.
Backdrop Brackets Assembly
• Insert backdrop brackets into the accessory
clamp, ensuring the threads match. Insert and
ghten the knob.
8
Feature: The knob can be loosened or ghtened
for adjusng the backdrop brackets.
• To adjust the posion of the Center Bar,
loosen its knobs and adjust the Center Bar
per your requirement.
Center Bar Posioning
• To adjust the height of the center bar, loosen
its knobs.
Center Bar Height Adjustment
Dierent Posioning of Center Bar
• Aer posioning it per your requirement,
re-ghten its knob.
9
• Loosen the knob on the camera mounng
plaorm and posion it per your
requirement.
Camera Setup
• Your Camera is securely mounted.
• Use the two plasc clips to clamp your
backdrop to the brackets.
NOTE: The Overhead Camera Plaorm does not
include the backdrop and other Related
Accessories.
• Aach the Camera (Not Included) to the
camera mounng plaorm and lock it
securely.
iPhone Adapter Assembly
• Securely aach the iPhone Adapter to the
camera mounng plaorm on the center bar.
10
• Slide the iPhone Adapter and mount your
iPhone (Not Included) on it.
• Aach the BS100 to the Camera Mount on
the Center Bar.
NOTE: The Centre Bar, with an adjustable
Camera Mount featuring a 1/4"-20 knob, is
compable with most Cameras. We include a
conversion adapter for 3/8″-16 mounng for
added exibility, oering wide compability.
BS100 Mounng
Height Adjustable Telescopic Pole
Table des matières
Autres manuels PROAIM Accessoires vidéo professionnels
PROAIM
PROAIM Atlas V2 Manuel utilisateur
PROAIM
PROAIM P-MC-CNL Manuel utilisateur
PROAIM
PROAIM Flycam SW-015-00 Manuel utilisateur
PROAIM
PROAIM P-HDRP-01 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM JB-VG08-01 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM Low Ninja Baby TP-LNJB-01 Manuel utilisateur
PROAIM
PROAIM ATLS-HAP Manuel utilisateur
PROAIM
PROAIM Quad Plus Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM P-OHCP-01 Manuel utilisateur
PROAIM
PROAIM P-WV-2PP Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM JB-VG12-01 Manuel utilisateur
PROAIM
PROAIM P-WV-2SD Manuel utilisateur
