PROAIM Explorer Manuel utilisateur

What’s In The

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Assembly Manua l

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Explorer Pan Tilt Head for Camera Jib Crane

(PT-EXPR-01)

Pan Tilt Head

Controller Box 12V AC Adapter

2 x Fuse

4 x Washers

4 x Knobs

O-Ring

2 x Camera Bolts

(Sizes: 1/4”-20 , 3/8”-16)

15mtr Cable 3mtr Cable

4 x Bolts

(Sizes: 1/4”-1”)

4 x Bolts

(Sizes: 1/4”-3/4”) 4 x Bolts

(Sizes: 1/4”-5/8”)

Bolt

Universal

Adapter

3 x T-Type Allen Keys

(Sizes: 2.5mm, 4mm, 5mm)

2 x L-Type Allen keys

(Sizes: 2mm, 3/16”)

1 x Spanner (Size: 13)

Balancing Tips

• Before balancing the camera, Detach the

motor gear assembly from the head.

NOTE: You can only balance the camera on the

head aer detaching the motor gear; otherwise,

the motor will not funcon properly.

• Then mount your camera on the explorer

head's camera plate.

• Horizontally balance your camera by placing

the camera in the center of the camera plate.

• Aer that, vercally balance your camera by

loosening the side knob and increasing it to

the desired height, then ghten the knob

properly.

• Loosen the Pan Tilt Head’s Knob and increase

its height.

Explorer Pro Pan Tilt Head Setup

• Then properly ghten the knob, as shown in

the image.

• Connect the male end of the cable to the

female end of the Pan Tilt.

Connecons of Controller Box

NOTE: Proaim Explorer Pan-Tilt head is precisely engineered, easy to operate & a silent companion for

accurate panning & lng moons.

• The camera is now balanced both vercally

and horizontally.

• Now, reaach the motor gear to the head.

NOTE: Make sure that the camera is balanced in

all direcons depending on its weight so that

the motor can funcon properly when aached.

• Insert the 12-volt AC adapter (4 pin XLR) in the

controller box.

NOTE: If the Joysck Control is opposite, undo

the connectors of motors, rotate 180° and

re-install.

• Switch ON the controller box, as shown in the

image.

• Increase/decrease the Panning speed as per

your requirements and set the damping.

• Aach the second end of the power cable to

the universal adapter.

• Aach the Power cable to the AC adapter.

• Connect the female end of the cable to the

controller box.

NOTE: Any 12 volt baery may operate this Pan

Tilt Head as long as the Connector and the #1

Negave pin & #4 Posive pin of Cable meet

together.

• Insert both the knobs and ghten them

securely. Follow the same process to insert

knobs at the backside as well.

• Properly slide the Pan Tilt into the Jib Arm, as

shown in the image.

NOTE: This 2-Axis pan-lt head facilitates

eortless connuous 360° rotaon on both

horizontal and vercal axis that gives the

operator full freedom to capture any desired

angle.

• To change the direcon of Panning move the

joy-sck to the le and right. And to change

the direcon of the Tilt, move the joysck

back and forth/ up and down.

NOTE: Joysck remote controller provides a

great range of pan and lt speed control with

an excellent rotaon for a complete revoluon

in any axis.

Pan Tilt Setup

NOTE: Speed Controller -The Speed Controller

adjusts the speed of pan & lt based on the

requirement of the shot.

Damping Control -Damping control prevents

the Head from stopping with a jerk enabling

you to achieve smooth endings.

Pan-Tilt Direcon -You can reverse the panning

& lng direcon as & when required.

NOTE: Adjusng the Camera Angle upside down

you capture graceful bird’s eye view shots at

ease & it is Suitable for surroundings such as

sports events, small and large studios, churches,

parliaments, etc.

• Insert the bolt and mount the camera

(Note Included) properly.

Camera Mounng Setup

YOUR PROAIM EXPLORER PAN TILT HEAD

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

support and care unl you use our product.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PROAIM Accessoires pour appareils photo

PROAIM

PROAIM Polaris Mini Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM ST-LHWK-01 Manuel utilisateur

PROAIM

PROAIM P-OHCR-01 Manuel utilisateur

PROAIM

PROAIM Gripmag Manuel utilisateur

PROAIM

PROAIM P-WV-2PL-SD Manuel utilisateur

PROAIM

PROAIM FF-WRLS-DR-ONE Manuel utilisateur

PROAIM

PROAIM P-L4-SL Manuel utilisateur

PROAIM

PROAIM Cambird Pro SL-CBPR-01 Manuel utilisateur

PROAIM

PROAIM Follow Focus X9 Manuel utilisateur

PROAIM

PROAIM P-TP-100-B Manuel utilisateur

PROAIM

PROAIM Power Pack Manuel utilisateur

PROAIM

PROAIM CH-FS7-TBK Manuel utilisateur

PROAIM

PROAIM VI-ISSC-8 Manuel utilisateur

PROAIM

PROAIM STD-PTZ-01 Manuel utilisateur

PROAIM

PROAIM P-TRK-12 Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM SC-03 Manuel utilisateur

PROAIM

PROAIM CG-014-00 Manuel utilisateur

PROAIM

PROAIM KITE-22-POPULAR Manuel utilisateur

PROAIM

PROAIM TDL-275 Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM P-PRT-D Manuel utilisateur

PROAIM

PROAIM Sr. Pan Tilt Head Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur