Pride Mobility Quantum 614 Manuel utilisateur

Serial #/série #/serie #/seriell #/serie # /seriale #

Provider:

Détaillant:

Leverancier:

Name:

Rivenditore:

Proveedor:________________________________________________________________________

Address:

Adresse:

Adres:

Adresse:

Indirizzo:

Dirección:________________________________________________________________________

Telephone:

Téléphone:

Telefoon nummer:

Tel. Nummer:

Telefono:

Número de teléfono:________________________________________________________________

Purchase Date:

Date d’achat:

Koop Datum:

Kaufdatum:

Data di acquisto:

Fecha de compra:___________________________________________________________________

Please ﬁll out the following information for quick reference:

S.V.P. veuillez compléter les informations ci dessous:

Vul alstublieft de volgende informatie in voor snelle referentie:

Mein autorisierter Fachhändler ist:

Informazioni di riferimento:

Por favor, rellene la siguiente información para tener siempre a mano:

4SCOOTER FEATURES TABLE

INFMANU4530/Rev D/September 2017

NOTE: Please become familiar with your scooter’s model number. The number can be found on the product

speciﬁcation sheet in your owner’s package. Throughout this owner’s manual, Scooter attributes are identiﬁed by

model number (far left-hand column on Scooter Features Table). Knowing your unit’s model number will aid you

in determining your particular scooter’s unique characteristics.

INTENDED USE

The intended use of the mobility device is to provide mobility to persons limited to a seated position that have the

capability of operating a scooter.

REGARDING DEVICES FOR PRESCRIPTION USE

CAUTION! Federal law restricts this device to sale by or on the order of a physician or

other certiﬁed personnel licensed by the law of the State (US only) or region in which

this personnel practices to use or order the use of this device.

NOTE: This owner’s manual is compiled from the latest speciﬁcations and product information available at

the time of publication. We reserve the right to make changes as they become necessary. Any changes to our

products may cause slight variations between the illustrations and explanations in this manual and the product

you have purchased. The latest/current version of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product complies with IPX4 Classiﬁcation (IEC 60529).

NOTE: The scooter and its components are not made with natural rubber latex. Consult with the manufacturer

regarding any after-market accessories.

*NOTE: Scooter options vary by country. Please contact your Provider to determine which options are available for

your Scooter.

Full-size Scooter Series 3

CONTENTS

SAFETY GUIDELINES ............................................................................................... 3

I. SAFETY ............................................................................................................ 4

II. YOUR SCOOTER .............................................................................................. 7

III. BATTERIES AND CHARGING ......................................................................... 19

IV. OPERATION ................................................................................................... 26

V. COMFORT ADJUSTMENTS ............................................................................ 28

VI. DISASSEMBLY AND ASSEMBLY .................................................................... 32

VII. BASIC TROUBLESHOOTING .......................................................................... 34

VIII. CARE AND MAINTENANCE ........................................................................... 36

SAFETY GUIDELINES

WARNING! An authorized Provider or qualiﬁed technician must perform the initial setup of this

scooter and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the scooter to identify warnings and important

information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage, or malfunction. On the

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as speciﬁed. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury and/or

equipment damage. On the product, this icon is represented as a black symbol with a red circle

and red slash.

4 Full-size Scooter Series

Manufactured in

Fully charge batteries before operating.

Remove key from an unattended Scooter.

Battery Set Conﬁguration:

+ = Positive (Red) Terminal Post

- = Negative (Black) Terminal Post

Connect Red wires to Red Positive (+) Terminal Posts.

Connect Black wire to Black Negative (-) Terminal Posts.

Read and follow the information in the owner’s manual.

I. SAFETY

PRODUCT SAFETY SYMBOLS

The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited actions. It is

very important for you to read and understand them completely.

NOTE: There are more warnings identiﬁed and explained in the Consumer Safety Guide that is included with

your scooter. Please become familiar with all the warnings and safety information found in the Consumer

Safety Guide and refer to this resource often.

Indicates tie-down points on the Scooter.

Scooter information label

Does not meet ISO 7176-19 standards for occupied transport in a motor

vehicle. When travelling in a motor vehicle, do not sit in your scooter.

MODEL #

60 AMP

CIRCUIT BREAKER

125A/50V

BATTERY

Full-size Scooter Series 5

I. SAFETY

GENERAL

MANDATORY! Do not operate your new scooter for the ﬁrst time without completely reading and

understanding this owner’s manual and the Consumer Safety Guide.

Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. We provide an extensive

variety of products to best ﬁt the individual needs of the scooter user. Please be aware that the ﬁnal selection and

purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user, who is capable

of making such a decision and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly ﬁtted the

scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Provider in the

instruction process for the use of the product.

There are certain situations, including some medical conditions, where the scooter user will need to practice

operating the scooter in the presence of a trained attendant. A trained attendant can be deﬁned as a family member

or care professional specially trained in assisting a scooter user in various daily living activities.

As you begin using your scooter during daily activities, you will probably encounter situations in which you will

need some practice. Simply take your time and you will soon be in full and conﬁdent control as you maneuver

through doorways, on and off elevators, up and down ramps, and over moderate terrain.

Additional general information can be found on the supplemental information sheets and booklets included in

your Owner’s Package. Please fully read and review the information, and keep it readily available for future

reference.

Below are some precautions, tips, and other safety considerations that will help you become accustomed to

operating the scooter safely.

PRE-RIDE SAFETY CHECK

Get to know the feel of your scooter and its capabilities. We recommend that you perform a safety check before

each use to make sure your scooter operates smoothly and safely.

Perform the following inspections prior to using your scooter:

Check the condition of the tires. Make sure they are not damaged or excessively worn.

Check all electrical connections. Make sure they are tight and not corroded.

Check all harness connections. Make sure they are secured properly.

Check the brakes to ensure they operate properly.

Check the battery condition meter to ensure the batteries are fully charged.

Ensure the manual freewheel lever is in drive mode before sitting on the scooter.

If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact Information

insert in your Owner’s Package.

6 Full-size Scooter Series

I. SAFETY

BRAKING INFORMATION

Your scooter is equipped with these powerful brake systems:

Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/

stop position.

Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop or when

power is removed from the system for any reason.

(Optional) Handbrake: This lever provides you with emergency stopping power. See II. “Your Scooter.”

HANDBRAKE LEVER (OPTIONAL — MODELS 613, 713, 714 AND 713ES)

The handbrake lever contains hydraulic ﬂuid. When the lever is depressed, the ﬂuid is pushed through the brake

line to engage the brake pads against the brake discs. The handbrake lever is a completely sealed unit, meaning

that the hydraulic ﬂuid should not leak; however, there are certain safety measures that should be taken if the

handbrake lever becomes cracked or damaged.

Do not touch spilled material unless wearing protective equipment, such as safety goggles and gloves.

For small spills, cover the material with dry earth, sand or other non-combustible absorbent material. Once

absorbed, enclose the material in a plastic bag and contact your local waste disposal agency for proper disposal

measures. Do not expose the material to waterways or sewers.

If the eyes are exposed, check for and remove contact lenses. Flush eyes with cool, clean, low-pressure water

while occasionally lifting and lowering the eyelids. Seek medical attention if excessive tearing, redness or

pain persists.

If the skin is exposed, remove all contaminated clothing. Wipe off excess material and wash exposed skin

with soap and water. Seek medical attention if skin appears damaged or if irritation persists. Thoroughly clean

contaminated clothing before reuse. Discard contaminated leather goods.

If ingested, do not induce vomiting or give anything to drink unless directed to by a physician. Never give

anything by mouth to a person who is not fully conscious. Seek medical attention immediately.

If inhaled, move the affected individual to fresh air. If the affected individual is not breathing, immediately

begin rescue breathing. If breathing is difﬁcult, 100% humidiﬁed oxygen should be administered by a qualiﬁed

individual. Seek medical attention immediately and keep the affected individual warm and at rest.

If ignited, use dry chemical, foam, carbon dioxide or water fog to extinguish.

WARNING! Do not modify the handbrake lever or attempt to replace the hydraulic ﬂuid. If damage

occurs, follow the safety information in this section and contact your authorized dealer for

handbrake replacement. The hydraulic handbrake should only be serviced or replaced by your

authorized dealer.

WARNING! The handbrake contains hydraulic ﬂuid that can cause mild skin, eye and nasal/

bronchial irritation. Do not attempt to adjust or service the handbrake without proper protective

equipment such as safety goggles and gloves and wash hands after handling.

Full-size Scooter Series 7

II. YOUR SCOOTER

TILLER CONSOLE

The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, key

switch, battery condition meter, status LED, horn buttons, turn signal buttons, handbrake lever, tiller adjustment

lever, and the throttle control lever. Please note that some of the features listed in this section are optional items

and may not appear on your scooter. See ﬁgure 1.

NOTE: If your scooter is equipped with an LCD Control Panel, please advance to the page in this section that

begins TILLER CONSOLE: LCD CONTROL PANEL.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console

does become exposed to moisture, do not attempt to operate your scooter until the tiller console

has dried thoroughly.

IDENTIFICATION KEY

1. HORN BUTTON

2. *LEFT TURN SIGNAL BUTTON

3. *HAZARD LIGHTS SWITCH

4. LIGHT SWITCH

5. *RIGHT TURN SIGNAL BUTTON

6. *HI-LOW SWITCH

7. THROTTLE CONTROL LEVER

8. SPEED ADJUSTMENT DIAL

9. BATTERY CONDITION METER

10. KEY SWITCH

11. MIRROR AND MIRROR PLUGS

12. *TILLER ADJUSTMENT LEVER

13. *HANDBRAKE LEVER

14. *BRAKE LOCK

8910

2 5

Figure 1.Tiller Console Components - Style A

*OPTIONAL COMPONENTS AVAILABLE ON SOME MODELS

**LOCATION OF HI-LOW SWITCH MAY VARY DEPENDING ON MODEL**

8 Full-size Scooter Series

II. YOUR SCOOTER

Horn Buttons

These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational. Do not

hesitate to use the warning horn when doing so may prevent accident or injury.

Turn Signal Buttons

Use these buttons to turn on the left and right turn signal (amber) lights.

Push the left button to activate the left turn signal light. The turn signal LED located in the battery condition

meter will ﬂash.

Push the right button to activate the right turn signal light. The turn signal LED located in the battery condition

meter will ﬂash.

The turn signals are timed to shut off automatically.

Lights Switch

This switch controls your scooter’s lighting system.

Toggle the switch forward to turn on the lighting system.

Toggle the switch rearward to turn off the lighting system.

WARNING! Scooter users are required to use their lights when visibility is restricted—day or

night.

Hazard Lights Switch

This switch activates the 4-way ﬂashers on your scooter.

Toggle the hazard lights switch forward to turn on the ﬂashers.

Toggle the hazard lights switch rearward to turn off the ﬂashers.

Hi-Low Switch

This switch toggles the scooter’s speed between Hi and Low. Toggle the switch forward (Hi) to achieve the

maximum preprogrammed speed for the scooter. Toggle the switch rearward (Low) to achieve half the maximum

preprogrammed speed of the scooter.

Throttle Control Lever

This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed

you preset with the speed adjustment dial.

To Move Forward, use either of the following:

Use your left thumb to push the left side of the throttle control lever.

Use your right hand ﬁngers to pull back on the right side of the throttle control lever.

To Move Rearward, use either of the following:

Use your right thumb to push the right side of the throttle control lever.

Use your left hand ﬁngers to pull back on the left side of the throttle control lever.

Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side

of the lever. When the throttle control lever is completely released, it automatically returns to the center “stop”

position and engages your scooter’s brakes.

Speed Adjustment Dial

This dial allows you to preselect and limit your scooter’s top speed.

The image of the tortoise represents the slowest speed setting

The image of the hare represents the fastest speed setting.

Full-size Scooter Series 9

II. YOUR SCOOTER

Battery Condition Meter

When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate

battery voltage strength. For further information on battery charging, see III. “Batteries and Charging.”

Status LED

The status LED alerts you to electrical problems that may occur with the scooter. The LED remains constantly lit

while your scooter is on. If your scooter develops an electrical problem, the status LED will ﬂash a code. See VII.

“Basic Troubleshooting” for ﬂash codes.

Key Switch

Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.

Turn the key counterclockwise to power down (turn off) your scooter.

WARNING! When faced with an emergency situation, switch off the key to power off the scooter.

Use caution. Be advised that turning off power to the scooter may cause the scooter to stop

abruptly. To release the emergency stop and restore driving capability to the scooter, release

the throttle control lever and then switch on the key to the scooter.

WARNING! If the key is turned to the “off” position while your scooter is in motion, the electronic

brakes will engage and your scooter will come to an abrupt stop.

Mirror Positioning and Adjustment

For information on positioning and adjusting your mirror, see V. “Comfort Adjustments.”

Tiller Angle Adjustment

For information on positioning and adjusting your tiller, see V. “Comfort Adjustments.”

Handbrake Lever

This lever provides you with emergency stopping power. When

in motion, release the throttle control lever and gently squeeze the

handbrake lever to come to a stop.

The handbrake can be locked and used as a parking brake by squeezing the

handbrake lever fully and moving the brake lock to the locked position.

See ﬁgure 1. To release the brake lock, fully squeeze the handbrake.

WARNING! The handbrake is intended for use as an

emergency brake and/or parking brake only.

Off-board Charger Port

The off-board charger power cord plugs into this port during battery

charging. The off-board charger port is located on the tiller. See ﬁgure 2.

Electrical System Fuses

Your scooter is equipped with a series of electrical system fuses, which

help protect the off-board charging system, key switch and lighting system

from receiving an overload of electrical current. These fuses are the same

type used in automobiles and are located in a compartment on the tiller.

See ﬁgure 2. See VIII. “Care and Maintenance” for fuse replacement.

NOTE: Keep all electrical areas clean and free of moisture and

foreign material.

IDENTIFICATION KEY

1. OFF-BOARD CHARGER PORT

2. OFF-BOARD CHARGER FUSE

3. KEY SWITCH FUSE

4. LOWER HEADLIGHT FUSE

5. REAR TAIL LIGHTS FUSE

6. LEFT TURN SIGNAL FUSE

7. RIGHT TURN SIGNAL FUSE

Figure 2. Off-board Charger Port/Tiller

Console Fuses

10 Full-size Scooter Series

TILLER CONSOLE: LCD CONTROL PANEL

The tiller console and lower tiller house all of the controls needed to drive your scooter, including the LCD control

panel, throttle control levers, key switch, and the throttle control lever switch. See ﬁgure 3.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console

does become exposed to moisture, do not attempt to operate your scooter until the tiller console

has dried thoroughly.

Horn Buttons

These buttons activate a warning horn. Your scooter

must be powered up for the horn to be operational. Do

not hesitate to use the warning horn when doing so

may prevent accident or injury.

Turn Signal Buttons

Press the appropriate turn signal button once to

activate it. The turn signal will ﬂash on the LCD

screen.

Press the same signal button to turn it off.

NOTE: The turn signals are timed to shut off after

15 seconds. Awarning beep will sound as long as the

turn signal is on. See ﬁgure 5 for volume control.

Lights Button

Press the lights button once to activate the lighting

system. The light symbol will be shown on the

LCD screen.

Press the lights button again to turn the lighting

system off.

WARNING! Scooter users are required

to use their lights when visibility is

restricted—day or night.

LCD Screen and Control Panel Settings

The LCD control panel offers easily intuited feedback

information via the LCD screen. See ﬁgure 3. The

LCD screen is also used during the set-up (activation)

of the various control panel settings.

II. YOUR SCOOTER

IDENTIFICATION KEY

1. HORN BUTTON

2. TURN SIGNAL BUTTONS

3. LIGHTS BUTTON

4. LCD SCREEN

5. SET BUTTON

6. HAZARD LIGHTS BUTTON

7. MODE BUTTON

8. HI-LOW BUTTON

9. SPEED ADJUSTMENT

(INCREASE)

10. SPEED ADJUSTMENT

(DECREASE)

11. THROTTLE CONTROL

Figure 3. LCD Control Panel - Style B

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Pride Mobility Scooter

Pride Mobility

Pride Mobility Legend XL Manuel utilisateur

Pride Mobility

Pride Mobility REVO Manuel utilisateur

Pride Mobility

Pride Mobility Go Go ES Manuel utilisateur

Pride Mobility

Pride Mobility GO-GO ELITE TRAVELLER Plus Manuel utilisateur

Pride Mobility

Pride Mobility VICTORY 10 Manuel utilisateur

Pride Mobility

Pride Mobility Sonic Manuel utilisateur

Pride Mobility

Pride Mobility Legend Manuel utilisateur

Pride Mobility

Pride Mobility Go-Go Manuel utilisateur

Pride Mobility

Pride Mobility The Ultimate In Style & Performance Manuel utilisateur

Pride Mobility

Pride Mobility SC40X Manuel utilisateur

Pride Mobility

Pride Mobility Rally Manuel utilisateur

Pride Mobility

Pride Mobility Legend XL Manuel utilisateur

Pride Mobility

Pride Mobility Legend XL Manuel utilisateur

Pride Mobility

Pride Mobility Wrangler Manuel utilisateur

Pride Mobility

Pride Mobility Jazzy Elite ES Manuel utilisateur

Pride Mobility

Pride Mobility Sidekick Manuel utilisateur

Pride Mobility

Pride Mobility Sonic Manuel utilisateur

Pride Mobility

Pride Mobility CELEBRITY X Manuel utilisateur

Pride Mobility

Pride Mobility Bebop Manuel utilisateur

Pride Mobility

Pride Mobility CELEBRITY X Manuel utilisateur

Pride Mobility

Pride Mobility Travel Pro Manuel utilisateur

Pride Mobility

Pride Mobility Traveller Plus Manuel utilisateur

Pride Mobility

Pride Mobility Go-Go Ultra X Manuel utilisateur

Pride Mobility

Pride Mobility Maxima Manuel utilisateur

Manuels Scooter populaires d'autres marques

TEKTRO

TEKTRO CHEETAH Manuel utilisateur

Douglas

Douglas Vespa Sprint Guide d'installation

PLAYTIVE

PLAYTIVE AS-2448 Manuel utilisateur

Ebinger

Ebinger DONKEY XL Manuel utilisateur

Flyer

Flyer Mountain Guide de l'utilisateur

BackCountry eBikes

BackCountry eBikes Storm Manuel utilisateur

equipmed

equipmed FreeRoam II Manuel utilisateur

Yoto

Yoto Lion Manuel utilisateur

WESTHILL BIKES

WESTHILL BIKES LINK Manuel utilisateur

BAnff

BAnff eProdigy series Manuel utilisateur

Winther

Winther 475 Manuel utilisateur

Jetson

Jetson JBZL17 Manuel utilisateur

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera

Carrera impel Manuel utilisateur

Afikim

Afikim Superlight SL-3 Manuel utilisateur

CareCo

CareCo ZOOM Manuel utilisateur

Douglas

Douglas Vespa G.S. Manuel utilisateur

Gazelle

Gazelle with BOSCH System Manuel utilisateur