Pride Mobility Go-go ES2 Manuel utilisateur

ES2

*INFMANU4467*

WARNING! An authorized Provider or qualified technician must perform the initial setup of

this scooter and must perform all of the procedures in this manual.

The symbols below are used throughout this owner's manual and on the scooter to identify warnings and

important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage, or malfunction. On the

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury and/

or equipment damage. On the product, this icon is represented as a black symbol with a red

circle and red slash.

INFMANU4467/Rev A/April 2013

INTENDED USE

The intended use of the Travel Scooter device is to provide mobility to persons limited to a seated position that

have the capability of operating a scooter.

NOTE: This owner’s manual is compiled from the latest specifications and product information available

at the time of publication. We reserve the right to make changes as they become necessary. Any changes to

our products may cause slight variations between the illustrations and explanations in this manual and the

product you have purchased. The latest/current version of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: The scooter and its components are not made with natural rubber latex. Consult with the

manufacturer regarding any after-market accessories.

SAFETY GUIDELINES

Provider:_________________________________________________________________________

Address:_________________________________________________________________________

Phone Number:__________________________ Purchase Date:___________________________

Please fill out the following information for quick reference:

ES2

CONTENTS

I. SAFETY ........................................................................................................................................4

II. YOUR TRAVEL SCOOTER ...................................................................................................6

III. BATTERIES AND CHARGING ...........................................................................................10

IV. OPERATION .............................................................................................................................16

V. COMFORT ADJUSTMENTS ..............................................................................................18

VI. DISASSEMBLY AND ASSEMBLY ...................................................................................20

VII. BASIC TROUBLESHOOTING ...........................................................................................21

VIII. CARE AND MAINTENANCE .............................................................................................23

4ES2

PRODUCT SAFETY SYMBOLS

The symbols below are used on the Travel Scooter to identify warnings, mandatory actions, and prohibited

actions. It is very important for you to read and understand them completely.

NOTE: There are more warnings identified and explained in the Consumer Safety Guide that is

included with your Travel Scooter. Please become familiar with all the warnings and safety information

found in the Consumer Safety Guide and refer to this resource often.

I. SAFETY

Read and follow the information in the owner’s manual.

Indicates tie-down points on the Travel Scooter.

Manufactured in.

Fully charge batteries before operating.

Ensure the power is off when Travel Scooter is

unattended.

MODEL #

Scooter information label.

Does not meet ISO 7176-19 standards for occupied transport in a

motor vehicle. When travelling in a motor vehicle, do not sit in your

Travel Scooter.

ES2

I. SAFETY

GENERAL

MANDATORY! Do not operate your new Travel Scooter for the first time without

completely reading and understanding this owner’s manual and the Consumer Safety

Guide.

Your Travel Scooter is a state-of-the-art life-enhancement device designed to increase mobility. We

provide an extensive variety of products to best fit the individual needs of the Travel Scooter user. Please

be aware that the final selection and purchasing decision regarding the type of Travel Scooter to be used

is the responsibility of the Travel Scooter user who is capable of making such a decision and his/her

healthcare professional (i.e., medical doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly fitted

the Travel Scooter to the user and has assisted the prescribing healthcare professional and/or the authorized

Provider in the instruction process for the use of the product.

There are certain situations, including some medical conditions, where the Travel Scooter user will need

to practice operating the Travel Scooter in the presence of a trained attendant. A trained attendant can be

defined as a family member or care professional specially trained in assisting a Travel Scooter user in

various daily living activities.

As you begin using your Travel Scooter during daily activities, you will probably encounter situations in

which you will need some practice. Simply take your time and you will soon be in full and confident

control as you maneuver through doorways, on and off elevators, up and down ramps, and over moderate

terrain.

Additional general information can be found on the supplemental information sheets and booklets

included in your Owner’s Package. Please fully read and review the information, and keep it readily

available for future reference.

Below are some precautions, tips, and other safety considerations that will help you become accustomed

to operating the Travel Scooter safely.

PRE-RIDE SAFETY CHECK

Get to know the feel of your Travel Scooter and its capabilities. We recommend that you perform a safety

check before each use to make sure your Travel Scooter operates smoothly and safely.

Perform the following inspections prior to using your Travel Scooter:

Check the condition of the tires. Make sure they are not damaged or excessively worn.

Check all electrical connections. Make sure they are tight and not corroded.

Check all harness connections. Make sure they are secured properly.

Check the brakes to ensure they operate properly.

Check the battery condition meter to ensure the batteries are fully charged.

Ensure the manual freewheel lever is in drive mode before sitting on the Travel Scooter.

If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact

Information insert in your Owner’s Package.

6ES2

1 2

II. YOUR TRAVEL SCOOTER

TILLER CONSOLE

The tiller console houses all controls needed to drive your Travel Scooter including the horn, the power

switch, the battery condition meter and the throttle control lever. See figure 1.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller

console does become exposed to moisture, do not attempt to operate your Travel

Scooter until the tiller console has dried thoroughly.

Figure 1. Tiller Console

Horn Button

This button activates a warning horn. Your Travel Scooter must be turned on for the horn to be operational.

Do not hesitate to use the warning horn when doing so may prevent accident or injury.

Power Switch

Toggle the power switch to the right to power up (turn on) your Travel Scooter in the highest speed

position.

Toggle the power switch to the cener position to power down (turn off) your Travel Scooter.

Toggle the power switch to the left to power up (turn on) your Travel Scooter in the lowest speed

position.

WARNING! If the power switch is moved to the center “off” position while your Travel

Scooter is in motion, the electronic brakes will engage and your Travel Scooter will come

to an abrupt stop!

Throttle Control Lever

This lever allows you to control the forward speed and the reverse speed of your Travel Scooter up to the

maximum speed you preset with the speed adjustment dial.

Place your right hand on the right handgrip and your left hand on the left handgrip.

Use your right fingers to pull the right side of the lever to disengage your Travel Scooter’s brakes and

move forward.

Release the lever and allow your Travel Scooter to come to a complete stop before pulling the other

side of the lever to move in reverse.

When the throttle is completely released, it automatically returns to the center “stop” position and

engages your Travel Scooter’s brakes.

IDENTIFICATION KEY

1. HORN

2. POWER SWITCH

3. THROTTLE CONTROL LEVER

4. BATTERY CONDITION METER

ES2

II. YOUR TRAVEL SCOOTER

Figure 2. Rear Components

REAR COMPONENTS

The manual freewheel lever, anti-tip wheels, and

motor/transaxle assembly are located on your Travel

Scooter as shown. See figure 2.

WARNING! Before placing your

Travel Scooter into or taking it out of

freewheel mode, turn the power

switch to the “OFF” (center) position.

Never sit on a Travel Scooter when it

is in freewheel mode. Never put a

Travel Scooter in freewheel mode on

any incline.

IDENTIFICATION KEY

1. MANUAL FREEWHEEL LEVER

2. MOTOR/TRANSAXLE ASSEMBLY

3. ANTI-TIP WHEELS

Manual Freewheel Lever

Whenever you need or want to push your Travel

Scooter for short distances, you can put it in

freewheel mode.

1. Locate the manual freewheel lever at the top right

of the rear section.

2. Push forward on the manual freewheel lever to

disable the drive system and the brake system.

You may now push your Travel Scooter.

3. Push the manual freewheel lever rearward to

reengage the drive and the brake systems; this

takes your Travel Scooter out of freewheel mode.

WARNING! When your Travel Scooter is in freewheel mode, the braking system is

disengaged.

 Disengage the drive motors only on a level surface.

 Ensure the power switch is in the “OFF” (center) position.

 Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on

a scooter to do this.

 After you have finished pushing your Travel Scooter, always return it to the drive

mode to lock the brakes.

Motor/Transaxle Assembly

The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your

Travel Scooter’s batteries into the controlled mechanical energy that drives the Travel Scooter’s wheels.

Anti-Tip Wheels

The anti-tip wheels are an integral and important safety feature of your Travel Scooter. They are bolted to

the frame at the rear of the Travel Scooter.

PROHIBITED! Do not remove the anti-tip wheels or modify your Travel Scooter in any way

that is not authorized by your Provider.

WARNING! The anti-tip wheels may cause interference with the smooth transition of your

Travel Scooter when ascending or descending a curb. Contact your authorized Provider

for more information.

Battery Condition Meter

When the power button is in either position to power up your scooter, this meter indicates

approximate battery strength. For further information on the battery condition meter, see III.

“Batteries and Charging.”

8ES2

II. YOUR TRAVEL SCOOTER

Main Circuit Breaker (Reset Button)

When the voltage in your Travel Scooter’s batteries

becomes low or the Travel Scooter is heavily

strained because of excessive loads or steep inclines,

the main circuit breaker may trip to protect the motor

and electronics from damage. See figure 3.

The main circuit breaker reset button pops out

when the breaker trips.

When the breaker trips, the entire electrical

system of your Travel Scooter shuts down.

Allow a minute or two for your Travel Scooter’s

electronics to “rest.”

Push in the reset button to reset the main circuit

breaker.

If the main circuit breaker trips frequently, you

may need to charge your batteries more often.

You may also need to have your authorized

Provider perform a load test on your Travel

Scooter’s batteries.

If the main circuit breaker trips repeatedly, see

your authorized Provider for service.

Charger Power Cord Receptacle

The 3-pin end of the charger power cord plugs into

this receptacle. See figure 3. There is a protective

rubber flap that, when pressed into place, fits over

the receptacle to shield it from dirt, debris, moisture,

or damage.

OFF-BOARD BATTERY CHARGER

The off-board battery charger, when plugged into the

charger power cord receptacle and a standard

electrical outlet, charges the Travel Scooter’s

batteries. See figure 4.

XLR

Figure 4. Off-board Battery Charger

Figure 3. Off-board Charger Port

IDENTIFICATION KEY

1. MAIN CIRCUIT BREAKER

2. CHARGER POWER CORD RECEPTACLE

ES2

II. YOUR TRAVEL SCOOTER

WARNING! Ensure Travel Scooters are properly secured to the motor vehicle during

transport. Scooters that are not properly secured can become a hazard to the user and

to other vehicle passengers in the event of a crash, sudden stopping, or swerving, as the

Travel Scooter could tip or slide out of place.

SECUREMENT POINTS

Always secure the Travel Scooter in a forward-facing position in the vehicle. Attach the four tie-down

straps to the designated securement points. See figure 5. Tighten the straps to sufficiently remove all

slack. Never attach tie-downs to adjustable, moving, or removable parts of the Travel Scooter such as

armrests, shrouds, and wheels. These items should be removed. Position the anchor points for the rear tie-

down straps directly behind the rear securement points on the Travel Scooter. The front tie-down straps

should anchor to floor points that are spaced wider than the Travel Scooter to provide increased lateral

stability.

Figure 5. Securement Points (Identified with black dots)

IDENTIFICATION KEY

1. FRONT SECUREMENT POINTS

2. REAR SECUREMENT POINTS

10 ES2

BATTERIES AND CHARGING

Your Travel Scooter requires two long-lasting, 10-volt, deep-cycle batteries that are sealed and

maintenance free. They are recharged by the supplied off-board charging system.

Charge your Travel Scooter’s batteries for at least 8 to 14 hours prior to using it for the first time.

Keep the batteries fully charged to keep your Travel Scooter running smoothly.

III. BATTERIES AND CHARGING

READING YOUR BATTERY VOLTAGE

The battery condition meter on the tiller console indicates the

approximate strength of your batteries using a color code. From right

to left on the meter, green indicates fully charged batteries, yellow a

draining charge, and red indicates that an immediate recharge is

necessary. See figure 6. To ensure the highest accuracy, the battery

condition meter should be checked while operating your Travel

Scooter at full speed on a dry, level surface.

CHARGING YOUR BATTERIES

PROHIBITED! Removal of grounding prong can

create electrical hazard. If necessary, properly

install an approved 3-pronged adapter to an

electrical outlet having 2-pronged plug access.

PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger

directly into a properly wired standard electrical outlet.

PROHIBITED! Do not allow unsupervised children to play near the Travel Scooter while the

batteries are charging. We recommend that you do not charge the batteries while the Travel

Scooter is occupied.

MANDATORY! Read the battery charging instructions in this manual and in the manual

supplied with the battery charger before charging the batteries.

WARNING! Explosive gases may be generated while charging the batteries. Keep the Travel

Scooter and battery charger away from sources of ignition such as flames or sparks and

provide adequate ventilation when charging the batteries.

WARNING! You must recharge your Travel Scooter’s batteries with the supplied off-board

charger. Do not use an automotive-type battery charger.

WARNING! Inspect the battery charger, wiring, and connectors for damage before each use.

Contact your authorized Provider if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does not

appear to be working correctly, contact your authorized Provider.

WARNING! If the battery charger is equipped with cooling slots, then do not attempt to

insert objects through these slots.

WARNING! Be aware that the battery charger case may become hot during charging. Avoid

skin contact and do not place on surfaces that may be affected by heat.

WARNING! If your battery charger has not been tested and approved for outdoor use, then

do not expose it to adverse or extreme weather conditions. If the battery charger is

exposed to adverse or extreme weather conditions, then it must be allowed to adjust to the

difference in environmental conditions before use indoors. Refer to the manual supplied

with the battery charger for more information.

Figure 6. Battery Condition Meter

Table des matières

Autres manuels Pride Mobility Scooter

Pride Mobility

Pride Mobility Legend 3-Wheel Scooter Manuel utilisateur

Pride Mobility

Pride Mobility v10 Manuel utilisateur

Pride Mobility

Pride Mobility PMV Series Manuel utilisateur

Pride Mobility

Pride Mobility The Ultimate In Style & Performance Manuel utilisateur

Pride Mobility

Pride Mobility Legend 4-Wheel Scooter Manuel utilisateur

Pride Mobility

Pride Mobility Go-Go Ultra X Manuel utilisateur

Pride Mobility

Pride Mobility Go-Go Ultra X Manuel utilisateur

Pride Mobility

Pride Mobility INFINFB2311 Manuel utilisateur

Pride Mobility

Pride Mobility Destiny Manuel utilisateur

Pride Mobility

Pride Mobility Sonic Manuel utilisateur

Pride Mobility

Pride Mobility Maxima Scooter SC940 Manuel utilisateur

Pride Mobility

Pride Mobility Legend Manuel utilisateur

Pride Mobility

Pride Mobility Ultimate 3 Manuel utilisateur

Pride Mobility

Pride Mobility Ranger Manuel utilisateur

Pride Mobility

Pride Mobility OUTBACK Manuel utilisateur

Pride Mobility

Pride Mobility Zero Turn 10 Manuel utilisateur

Pride Mobility

Pride Mobility Sonic Manuel utilisateur

Pride Mobility

Pride Mobility Sidekick Manuel utilisateur

Pride Mobility

Pride Mobility COLT XL8 Manuel utilisateur

Pride Mobility

Pride Mobility 39 Manuel utilisateur

Pride Mobility

Pride Mobility Celebrity DX Manuel utilisateur

Pride Mobility

Pride Mobility COLT PURSUIT Manuel utilisateur

Pride Mobility

Pride Mobility Quantum 614 Manuel utilisateur

Pride Mobility

Pride Mobility iRIDE S25 Manuel utilisateur

Manuels Scooter populaires d'autres marques

TEKTRO

TEKTRO CHEETAH Manuel utilisateur

Douglas

Douglas Vespa Sprint Guide d'installation

PLAYTIVE

PLAYTIVE AS-2448 Manuel utilisateur

Ebinger

Ebinger DONKEY XL Manuel utilisateur

Flyer

Flyer Mountain Guide de l'utilisateur

BackCountry eBikes

BackCountry eBikes Storm Manuel utilisateur

equipmed

equipmed FreeRoam II Manuel utilisateur

Yoto

Yoto Lion Manuel utilisateur

WESTHILL BIKES

WESTHILL BIKES LINK Manuel utilisateur

BAnff

BAnff eProdigy series Manuel utilisateur

Winther

Winther 475 Manuel utilisateur

Jetson

Jetson JBZL17 Manuel utilisateur

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera

Carrera impel Manuel utilisateur

Afikim

Afikim Superlight SL-3 Manuel utilisateur

CareCo

CareCo ZOOM Manuel utilisateur

Douglas

Douglas Vespa G.S. Manuel utilisateur

Gazelle

Gazelle with BOSCH System Manuel utilisateur

Pride Mobility go-go ES2 Manuel utilisateur

Manuels Scooter populaires d'autres marques