Dealer Service
For the name of your local dealer or for technical assistance from PremierTechnologies, contact:
PremierTechnologies,Inc.
One Premier Drive • P.O. Box 159,Long Lake,MN 55356
(612) 475-2317 • (800) 466-8642
FCC PART 15 ClassA Information:
This equipment uses and generates radio frequency energy. It has been tested and found to be in
compliance with the limits for a ClassA computing device in accordance with the specifications in Subpart
A,Part 15 of the FCC rules. These limits are designed to prevent interference with radio and television
reception in a commercial installation.
This product has passed FCC testing. However,if it is not installed and used properly,you may notice
radio and television interference. You can minimize the chance of interference by carefully reading this
manual and following the instructions for installation and operation of the unit. If you have installed and
are using this product properly and notice interference, you should verify the source of the interference
by turning the suspected source of interference on and off. If this product is determined to be the cause
of the interference,you are encouraged to try and correct the interference by the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between this product and the receiver.
• Connect this product to an outlet which is on a different
branch circuit than the receiver.
If none of the above items correct the interference,contact an experienced radio orTV technician or
your dealer for assistance.
*WARNING: The user is cautioned that changes or modifications not expressly approved by the
Grantee of the equipment authorization could void the user’s authority to operate the equipment.
FCC Part 68 Registration and Repair Information:
This product has been tested and found to be in compliance with standards in Part 68 of the FCC Rules.
The FCC requires us to provide you with the following information:
1.) Connection and use with the nationwide telephone network –The FCC requires that you
connect your product to the nationwide telephone network through a modular telephone outlet or jack.
The modular telephone outlet or jack to which the device must be connected is a USOC RJ-11C or RJ-
11W. This equipment may not be used with Party Line Service or with CoinTelephone Lines.
2.) Notification to the telephone company –The FCC requires that upon request of your local
telephone company,you provide the FCC registration number and ringer equivalence (REN) for this
equipment. This information can be found on a label located on the bottom of this product.
3.) Use of REN –The REN number is used to determine the maximum quantity of devices which may
be connected to the telephone line. Excessive REN’s on the telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas,the sum of the REN’s should be 5 or
less. To be certain of the maximum allowed REN number, contact your local telephone company.
4.) Repair Instructions – If trouble is experienced with you Model 2800 series equipment,please
contact PremierTechnologies,Inc. at 1-800-466-8642 for repair and (or) warranty information.
5.) Rights of the telephone company – If your Model 2800 series equipment is causing harm to the
telephone network,the telephone company will notify you in advance that temporary discontinuance of
service may be required. If advance notice isn’t practical, the telephone company will notify you as soon
as possible. Also,you will be advised of you right to file a complaint with the FCC if you believe it is
necessary. The telephone company may also make changes in its facilities,equipment,operations,or
procedures that could affect the operation of your equipment. If this happens,the telephone company
will provide advance notice for you to make the necessary modifications in order to maintain
uninterrupted service.
4 DDF 2800 Installation Instructions
