PR Lighting PR-3203T Manuel utilisateur

LED Studio 3203D/3203T

PR-3203T

PR-3203D

This product manual contains important information about the safe installation and use of this unit.

Please read and follow these instructions carefully and keep this manual in a safe place for future

reference.

PR LIGHTING LTD.

http://www.pr-lighting.com

2/ 12

INDEX

ACESSORIES......................................................................................................................................................... 2

SAFE USAGE OF THE UNIT.................................................................................................................................... 3

INSTALLING THE UNIT.......................................................................................................................................... 4

CONTROL CONNECTION...................................................................................................................................... 4

DMX TERMINATOR ............................................................................................................................................. 5

OPERATION MENU.............................................................................................................................................................6

DMX PROTOCOL.................................................................................................................................................................6

INDICATION OF LED DIGITAL TUBE ...................................................................................................................................6

SETUP OPTIONS-UNIT CONFIGURATION..........................................................................................................................7

MAINTENANCE...................................................................................................................................................................8

TROUBLESHOOTING........................................................................................................................................................8

TECHNICALDATA............................................................................................................................................................9

ELECTRICALDIAGRAM............................................................................................................................................... 11

COMPONENT ORDERCODES...................................................................................................................................... 11

BACKCOVER................................................................................................................................................................. 12

Please note that as part of our ongoing commitment to continuous product development, specifications are

subject to change without notice. Whilst every care is taken in the preparation of this manual we reserve the

right to change specifications in the course of product improvement. The publishers cannot be held responsible

for the accuracy of the information herein, or any consequence arising from them.

Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and /

or the unit are in good condition before installation and use. Should there be any damage caused by

transportation, consult your dealer and do not use the unit. Any damage caused by improper use will not be

assumed by the manufacturer and / or dealer.

ACCESSORIES

These items arepacked together withtheunit:

Name

Quantity

Unit

Remark

Safetycord

Withone 1.2mand the other 0.55m in length

XLRsignalcable

Power cord

User’s manual

ClampandMountingBolt

Set

3/ 12

SAFE USAGE OF THE UNIT

When unpacking and before disposing of the carton, check there is no transportation damage before using the unit. Should

there be anydamagecaused by transportation, consultyourdealer and do not use theapparatus.

The unit can beonly used indoors,IP20. The fixture should be kept indry place without excessive dampness, heat, dust and

contact withwaterorother liquids.

Theunitis notdesignedorintendedtobe mounted directlyontoinflammable surfaces.

The unitisonlyintendedforinstallation, operationand maintenance byqualifiedpersonnel.

Do notprojectthebeamontoinflammable surfaces, minimum distanceis2m. 2m

Avoiddirectexposureto the lightfrom thelamp.The lightisharmful toeyes.

Do notattempttodismantleand/or modify theunitin any way.

Electricalconnectionmustonlybecarried outbyqualifiedpersonnel.

Beforeinstallation,ensurethatthe voltageand frequencyofpower supplymatchthepower requirementsoftheunit.

Itisessential thateachunitiscorrectlyearthed andthatelectricalinstallation conformstoallrelevantstandards.

Do notconnectthisdeviceto anyothertypesofdimmerapparatus.

Make sure that the power-cordis never crimpedor damaged by sharp edges. Never let the power-cordcomeintocontactwithother

cables.Onlyhandlethepower-cord bytheplug.Never pullouttheplugbytuggingthepower-cord.

When the unit is hanged to a high place, please use a safety cord provided to pass through the unit’s support as a secondary

safety fixing for safety seasons. For details, refer to “INSTALL THE UNIT“section.

Exteriorsurfacetemperaturesoftheunitafter 5 minutes’ operation is 45℃,whenachievingsteadystateitis55℃.

Thereis no userserviceablepartsinside theunit,donotopen the housingand neveroperatetheunitwiththecoversremoved.

If any questions, don’t hesitate to consult your dealer or manufacturer.

Always disconnection from the power, when the device is not in use or before cleaning or any

maintenancework !

4/ 12

INSTALLTHE UNIT

The figures above with a Mounting Bar for the illustrations of the installation is for our clients’reference and it

is not a accessory to be supplied up on delivery . This fixture should be hung upon use, but not hung by its side.

The whole fixture can be rotated by hand within the range of 180 degrees. While installation, take out two

safety cords supplied and hook the clamp to the fixture’s support, then hook the clamp to the Mounting Bar and

tighten the fasteners of the clamp to mount the whole fixture. Please be sure that the fixture is mounted

securely and the mounting place strong enough to support the fixture’s weight. For safety, please run a 1.2m

safety cord supplied through the Mounting Bar and the Mounting Structure of the fixture, and a second 0.55m

safety cord though the barn door module as the figures above for the supplement to ensure safety.

Warning:

1. TheunitMUSTbe liftedorcarriedvia supportingframeinsteadofclamps.

2. For safety the long safety cord should afford 10 times the unit’s weight and the short one 10 times barn door

module’sweight.

CONTROLCONNECTION

5/ 12

Connection between the controller and a unit and between one unit and another must be made with a 2 core-screened cable,

with each core having at least a 0.5mm diameter. Please use the unit’s cannon 5- pin signal input and output cables as

connection.The5-pinsignalconnectionsareconnectedasshowninthefigureabove.

Note: Care should be takento ensure thatnone of the pins touchthe metallic bodyof the plugor each other. The bodyof the

plugisnotconnected inanyway.TheunitacceptsdigitalcontrolsignalsinprotocolDMX512(1990).

The maximum of units in parallel for operation is 16 pcs. Connect the controller’s output to the first fixture’s input, and

connect the first fixture’s output to the second fixture’s input and connect the rest fixtures in the same way. Eventuallyconnect

the last fixture’s output to a DMX terminator as shown in the figure below. Note: for synchronous control, the start addresses

ofall slavesshould besame.

Each unit should be connected to power supply individually and the voltage and frequency of the power supply should match

those indicatedonnameplate.

DMXTERMINATOR

In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This

preventselectrical noise fromdisturbing and corrupting theDMX control signals.

The DMX terminator is simply an XLR connector with a 120(ohm) resistor connected across pins 2 and 3, which is then

pluggedinto theoutputsocketonthelastunitinthe chain.Theconnectionsareillustratedbelow.

6/ 12

Operations Menu

1st level menu

2nd level menu

3rd levelmenu

Remarks

DMXAddress

001 -512

SetupofDMXAddress

Config Setup

LEDDimmerTest

ReferenceOnly, notsaved

FocusPosition

Linearlyfocusing

LcdLightSetup

Off

Display shuts off 3 minutes after

buttons are notpressed after the exit

ofmenus

Language Setup

English

Language selection

Chinese

DisplayInversion

Off

Information

LEDTemperature

XXXX

FixtureuseTime

V.X.X

Fixture usage time

SoftwareVersion

V.X.X

DMX PROTOCOL

CHANNEL

FUNCTION

DMX

DESCRIPTION

Dimmer

000-255

Fromdarkto bright

Strobe

000 -007

NOstrobe

008 -255

Strobespeedfromslowto fast

Focusing

000-255

Fromsmallangleto bigangle

INDICATION OF LED DIGITALTUBE

ADD Indication

DMX signal

OFF

NODMXsignal

7/ 12

SETUPOPTIONS-UNIT CONFIGURATION

DMX

ExplanationsforControlPanel andPotentiometer

After power-on, LCD display displays the company’s LOGO “PR”. After reset, the display is at initial display status

showing information about company’s name including LOGO “PR”, fixture’s model and DMX address( if the start address

is001,itdisplaysas “address=001”) and at the same time the display is locked.

To browse through or change a fixture’s configuration, after ENTER button has been pressed for about 3 seconds, the display

of AddR means the entrance of the menu. To set or browse through a fixture’s settings, press buttons of UP and DOWN.

After button ENTER is pressed, a sub-menu is entered showing current parameters while parameters flashing. Press button

UP or DOWN to change values(plus or minus)

Pressbutton ENTER tosave your settingsorenterintotheupperlevel menuandtheparameters stopsfrom flashing.

Press FUNC to enterintothe upper level menu(parametersnotsaved)orbrowse throughtheupper levelmenu.

After FUNC is pressed for more than 1second or buttons not pressed for more than 1 minute, it will go back to LCD display

initialstage.

After the exitofthe menus, the fixture’s brightness can be adjusted by potentiometer.( Only after the exit of the menus and no

DMX signalcanthiswork)

If there is DMX signal, the DMX signal indication will be on, and at the same time LCD display displays DMX address

accordingly,otherwise,theindication willbe off..

After the startup of the fixture, reset begins, but the lamp willbe on after the reset is completed, at this stage, the brightness of

the fixture is as what the potentiometer points to. If the brightness needs to be changed, please follow the above-mentioned

instructions.Afterreset,thefocallengthwillbethe one setduringlastuse..

OperationGuide

1. Setupof StartAddress

Each unit must be given a DMX start address so that the correct unit respondsto thecorrect control signals. This DMX start

address is the channel number from which the unit starts to “listen” to the digital control information being sent out from the

controller. Theunithas3 DMXchannel,so setthe No.1unit’s address 001, No. 2 unit’s address 004,No.3unit’s address 007,

andsoon.

2.ConfigurationSetup

While the display is locked( initial stage of the display), press the ENTER for more than 3 seconds to unlock it, then press

UP or DOWN to find the menu of Config Setup and press ENTER to enter sub-menus. Press UP or DOWN to find

secondarysubmenusof Dimming, Focusing, LCD display, Language and DisplayInversion.Press ENTER if the submenu is

8/ 12

desired, then change the parametersafter pressing UP or DOWN. At last press ENTER to save it and go backto the upper

level menu.

3.Information

While the display is locked( initial stage of the display), press the ENTER for more than 3 seconds to unlock it, then press

UP or DOWN to find the menu of Information and press ENTER to enter sub-menus. Press UP or DOWN to find

secondarysubmenusofLEDTemperature, FixtureTimeandSoftwareVersion.Press ENTER ifthe information isdesired.

4.Manual Dimming

At the initial stage of the display (after the exit of menu) and without DMX signal, 0-100% linear dimming is available by

potentiometerKnob.

5. ResetTest

Automatic reset will be done after first Power-on or re-Power onafter a Power-off. Whilereset, thecontrolpanel will display

big “PR”Logo. After reset, the control panel will display some information about logo, product model, a fixture’s DMX

address and etc ,and fixture’s angle be adjusted to the one before last power-off. During the reset, there may be some strange

soundslike“DuDu”for about20seconds,butthisisa normalphenomenon.

DimmerPrioritySequence.

PrioritySequence:DigitalOperationPanel>DMXDimmer> PotentiometerDimmer

1. UnderMenuMode,Potentiometer Dimmer doesn’t work.

2. UnderMenuMode,DMX worksnormallyexcludingDimmerFunction.

3. If the menu is under Dimmer Mode, DMX Dimmer & Potentiometer Dimmer don’t work.

MAINTENANCE

To prolong the life of the unit, it is very important to do the maintenance work. If the unit is idle for a long time, damp,

smoke or particularly dirty surroundings can cause greater accumulation of dirt on its cover and housing. So it should be

cleanedtomaintain anoptimumlightoutputand atthesametimetopreventitfrombeing corruptedbyacidgas.

Cleaning frequency depends on the environment in which the fixture operates. Soft cloth and typical glass cleaning products

shouldbeused for cleaning.It isrecommendedto cleanunit at leastonceevery20days.

Do notuseany organicsolvent,e.g.alcohol,tocleanhousingof theapparatus.

TROUBLESHOOTING

PROBLEM

ACTION

Theunitdoesn’t switch on

Power connectionisnotcorrect.

Power supply is damaged or abnormal. Call a qualified personnel to fix

it.

Connectionof control board is not correct. Call a qualified personnel to

fixit.

Theunitcanbeturnedon,butLEDsdo

notemitlightandareoutofcontrol.

ConnectionofLED board is notcorrect. Calla qualified personnel to fix

it.

The lampcomes on but the unitdoesn’t

respondto thecontroller

Makesure thattheunit iscorrectlyconfigurated.

Replaceorrepair theDMX cable.

Thebeamappears dim

Theunitis too hot.Take ventilation measures to make it cool.

9/ 12

TECHNICALDATA

VOLTAGES:

100V-240V AC，50/60Hz

POWER CONSUMPTION:

280W@220V

LED:

Power consumption

250W

Quantity

1pc

Manufacturers RatedLED Life

50000 Hours

COLOURTEMPERATURE:

PR-3203T:3200±250

PR-3203D:5600±250

Luminous Flux

PR-3203D:14°：7100 lm，48°: 10700 lm

PR-3203T: 14°：5300lm，48°: 8300lm

CRI

Ra≥93

DIMMER:

0-100% linearly adjustable

Zooming

Motorized Zoomingis available

BEAMANGLE:

Fieldangle(1/10 peak) θ 14°-48°

CONTROL:

DMX512,5pininterfaces

HOUSING:

High-intensity aluminum alloy, IP20

WORK ENVIRONMENTTEMPERATURE:

-20°C~40°C

NETWEIGHT:

16KG

10 / 12

SIZES: 670x355x520mm

LightOutput

LuminousFlux

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PR Lighting Matériel de DJ

PR Lighting

PR Lighting LED STUDIO 3605 Manuel utilisateur

PR Lighting

PR Lighting XLED 250 BEAM Manuel utilisateur

PR Lighting

PR Lighting PR-2302 Manuel utilisateur

PR Lighting

PR Lighting XR440 BEAM Manuel utilisateur

PR Lighting

PR Lighting XR480 BWS Manuel utilisateur

PR Lighting

PR Lighting PR-8330 Manuel utilisateur

PR Lighting

PR Lighting MEGA COLOUR 2000 Manuel utilisateur

PR Lighting

PR Lighting XRLED 3000-W Framing Manuel utilisateur

PR Lighting

PR Lighting LED Studio 3200T Manuel utilisateur

PR Lighting

PR Lighting XPar 150 Manuel utilisateur

PR Lighting

PR Lighting XR 1000 Framing Manuel utilisateur

PR Lighting

PR Lighting XLED 6019 Manuel utilisateur

PR Lighting

PR Lighting PR-8110 Manuel utilisateur

PR Lighting

PR Lighting XRLED 1200 SPOT Manuel utilisateur

PR Lighting

PR Lighting PR-8541 Manuel utilisateur

PR Lighting

PR Lighting XR 380 Beam Manuel utilisateur

PR Lighting

PR Lighting AQUA 350 BEAM PR-2368 Manuel utilisateur

PR Lighting

PR Lighting JUNIOR JNR PAR ZOOM 3618 Manuel utilisateur

PR Lighting

PR Lighting ARC LED 3108 Manuel utilisateur

PR Lighting

PR Lighting XR 1700 FRAMING Manuel utilisateur

PR Lighting

PR Lighting AQUA LED 600 SPOT Manuel utilisateur

PR Lighting

PR Lighting LED Studio 3800T Manuel utilisateur

PR Lighting

PR Lighting JNR DOT BEAM Manuel utilisateur

PR Lighting

PR Lighting XPar 348 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur