Portfolio Outdoor 39335 Manuel utilisateur

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 1-800-554-6504, Monday - Friday, 8 a.m. - 4:30 p.m., EST.

Français p. 9

Español p. 17

ITEM #149709

MODEL #39335

LANTERN PENDANT

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Portfolio Outdoor® is a registered

PACKAGE CONTENTS

Outlet Box

(Not Included)

A Canopy 1

Screw Collar Ring 1

Chain 1

Fixture Loop 1

Fixture Body 1

Hex Coupling 1

Open Chain Link 1

Screw Collar Loop 1

PART DESCRIPTION QUANTITY

Wire

Connectors

Machine

Screws

BB DD

Mounting

Bracket

Ground

Screw

(Not Shown

to size)

Hexnut

GND

HARDWARE CONTENTS (shown actual size)

Qty: 2

Qty: 1

(Not Shown

to size)

Please read and understand this entire manual before attempting to assemble, operate or install the

product. If you have any questions regarding the product, please call customer service at

1-800-554-6504, Monday - Friday, 8 a.m. - 4:30 p.m., EST.

WARNING:

• IMPORTANT: NEVER attempt any work without shutting off the electricity.

• Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the “OFF”

position and unscrew the fuses(s), or switch “OFF” the circuit breaker switch(es), that control the

power to the fixture or room that you are working on.

• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,

place it in the "OFF" position.

• Do not use bulbs with wattage greater than specified on this fixture.

• WARNING: California Prop 65: This lighting fixture contains chemicals known to the state of California

to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.

CAUTION:

• Read and understand all instructions and illustrations completely before proceeding with assembly

and installation of this fixture.

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate

completely, please contact a qualified licensed electrical contractor.

• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out,

or use any parts that are worn out or broken. Failure to obey this instruction could invalidate the ETL

listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product.

Contact customer service for replacement parts.

Estimated assembly time: 30 minutes to 1 hour.

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, chain pliers, ladder, safety glasses.

SAFETY INFORMATION

Threaded

Nipple

Qty: 1

ASSEMBLY INSTRUCTIONS

Machine

Screws x 2

x 1

Hexnut x 2

DD Mounting

Bracket

Hardware Used

Outlet

Box

(Not

Included)

1. Screw fixture loop (D) into hex coupling (F) on

fixture body (E) by turning counter-clockwise.

(See Fig. 1.)

2. Connect mounting bracket (DD), with machine

screws (BB) to the outlet box. Orient mounting

bracket (DD) to that the raised center portion

protrudes into the outlet box. Screw threaded

nipple (FF) into screw collar loop (H) a

minimum of 1/4 in. Lock in place with hexnut

(CC). Screw second hexnut (CC) to the center

of threaded nipple (FF) and screw into

mounting bracket (DD). (See Fig. 2.)

GND

x 1

FF Threaded

Nipple

ASSEMBLY INSTRUCTIONS

Hardware Used

4. Attach end of chain (G) to screw collar loop (H) with

one of the open chain links. Weave the fixture

electrical and ground wires through every other

chain link and pass through threaded nipple (FF)

into outlet box. Lower the screw collar ring (B) and

canopy (A) over the chain (C). (See Fig. 4.)

3. Pass canopy (A) over the screw collar loop (H).

Turn the screw collar loop (J) in or out of the

mounting bracket (DD) until 1/2 of the screw

collar loop (H) exterior threads are exposed.

After a desired position is found, lock threaded

nipple (FF) in place by tightening the second

hexnut (CC) up against the mounting bracket

(DD). Attach screw collar ring (B) to screw collar

loop (H). (See Fig. 3.)

x 1

Hexnut x 2

DD Mounting

Bracket

GND

x 1

FF Threaded

Nipple

Hardware Used

x 1

FF Threaded

Nipple

CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductort

ASSEMBLY INSTRUCTIONS

6. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),

following the reference chart listed below.

*NOTE:

When parallel wire (SPT I & SPT II) is used.

The neutral wire is square shaped and ridged

and the hot wire will be round in shape and

smooth. (See Fig. 6.)

Hardware Used

x 2

Wire Connectors

GND

Hardware Used

x 1

DD Mounting

Bracket

Ground

Screw

GND

5. Ground wire connection guide (see Fig. 5.):

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (EE) on mounting bracket

(DD), no less than 2 in. from wire end.

Tighten ground screw (EE). If fixture is

supplied with a ground wire, connect fixture

ground wire to outlet ground wire with an

extra wire connector (not included).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (EE) on

mounting bracket (DD). Tighten ground

screw (EE).

ASSEMBLY INSTRUCTIONS

7. Using chain pliers, attach open chain link (G) to

fixture loop (D). (See Fig. 7.)

CARE AND MAINTENANCE

TROUBLESHOOTING

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

Fixture does not light. 1. Fixture may be wired incorrectly. 1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

If you have any questions regarding the product, please call customer service at 1-800-554-6504,

Monday - Friday, 8 a.m. - 4:30 p.m., EST.

WARRANTY

Printed in China

Distributor warrants products manufactured by it will be free from defects in material and workmanship

for one (1) year following the date of shipment. This warranty does not cover bulbs or finish on outdoor

product. If any of the warranted products are found by Distributor to be defective, such products will, at

Distributor’s option, be replaced or repaired at Distributor’s cost. The parties hereto expressly agree that

Buyer’s sole and exclusive remedy against the Distributor shall be for the repair or replacement of

defective products as provided herein, or, at the Distributor’s sole option, Distributor may refund the

purchase price of the products. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR

ANY PARTICULAR PURPOSE OR INFRINGEMENT. No affirmation of Distributor, by words or action,

other than set forth in this paragraph shall constitute a warranty. Goods which may by sold by Distributor

but which are not manufactured by Distributor are not warranted by Distributor, but are sold only with the

warranties, if any, of the manufacturer thereof. This warranty does not cover labor or other costs or

expenses to remove or install any defective, repaired or replaced product. Distributor’s warranty does

not apply to any products that have been subjected to misuse, mishandling, misapplication, neglect

(including, but not limited to improper maintenance), accident, improper installation, modification

(including, but not limited to use of unauthorized parts or attachments), or adjustment or repair.

MODÈLE #149709

MODÈLE #39335

LANTERNE SUSPENDUE

Portfolio Outdoor® est une marque de

commerce déposée de LF, LLC. Tous

droits réservés.

Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au

détaillant, appelez notre service à la clientèle au 1 800 554-6504, entre 8 h et 16 h 30

(HNE), du lundi au vendredi.

Numéro de série Date d’achat

ACouvercle 1

Bague du collier à anneau 1

Chaîne 1

Anneau de suspension 1

Corps du luminaire 1

Raccord hexagonal 1

Maillon de chaîne ouvert 1

Collier à anneau de suspension 1

Boîte de sortie

(non incluse)

PIÈCE DESCRIPTION QUANTITÉ

CONTENU DE L’EMBALLAGE

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Portfolio Outdoor Éclairage extérieur

Portfolio Outdoor

Portfolio Outdoor RS40Pb-R5-RS-W8 Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor FB12-001 Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor 39331 Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor LV65020AL2 Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor P1012B Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor POST HURRICANE LIGHT Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor EL0049BK Manuel utilisateur

Portfolio Outdoor

Portfolio Outdoor PL120MWW Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur