Polygroup TG76P3961C04 Manuel utilisateur

Fig. B - Tree and Light Assembly

TREE ASSEMBLY INSTRUCTIONS

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

NEED HELP?

Section 3

Tree top

Section 2

Section 1

*Electrical Rating For The Tree

(For Indoor Use Only)

1.7A 120V 60Hz

Congratulations on purchasing your new tree from Polygroup®!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Fig. A - Tree pot Assembly

Insert

Green Label

Plug Into Wall

Outlet

Assemble

Red Labels

Together

Assemble

Yellow Labels

Together

Assemble

Blue Labels

Together

3. Each tree section is numbered with a tag. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into the

assembled pot. Make sure the pole is firmly inserted and secured into the pot.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Connect the light strings as per the color labels indicated in (See Fig. B) and insert green label plug into the wall outlet.Your entire tree

should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs

promptly in order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one

to the right, one to the left and one at the center of the main stem. (See Fig. C)

TREE# : F36

MODEL # : TG76P3961C04

SKU # : 124304159

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the power

cord is plugged into the wall outlet. Refer to assembly guide for instructions.

2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.

Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug and power cord plug.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs and fuses are also included.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

Fig. D

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to

fill any gaps.Your Christmas tree is now complete and ready to be decorated.

Top view Side view

Fig. C

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070

or visit our website at www.polygroupstore.com.One of our customer service representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

CUSTOMER SERVICE FOR CHRISTMAS TREES

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet and then disconnect

light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in

both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the

bottom section is removed from the tree pot.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight.Exposing your tree to excessive heat or humidity

may damage your tree.

STORAGE INSTRUCTIONS

CAUTION:

To reduce the risk of fire and electric shock:

a) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.

b) Do not mount or support strings in a manner that can cut or damage wire insulation.

c) Do not use near candles, heaters, or other similar sources of heat.

d) Do not use candles on tree. Use only included light string (if present).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Polygroup sapin artificiel

Polygroup

Polygroup TG76M2251D01 Manuel utilisateur

Polygroup

Polygroup TGA0M4865C01 Manuel utilisateur

Polygroup

Polygroup HOLIDAY SYMPHONY Evergreen Classics Manuel

Polygroup

Polygroup Ashland TG76P4564D02 Manuel utilisateur

Polygroup

Polygroup TGC0P4693L03 Manuel utilisateur

Polygroup

Polygroup TG76M3AE4C00 Manuel utilisateur

Polygroup

Polygroup TV90M2U56C00 Manuel utilisateur

Polygroup

Polygroup TP30M2W72C00 Manuel utilisateur

Polygroup

Polygroup TG76M4B91D00 Manuel utilisateur

Polygroup

Polygroup TG76M3Y85C02 Manuel utilisateur

Polygroup

Polygroup TG70M3AW0X00 Manuel utilisateur

Polygroup

Polygroup TG60M2S14C02 Manuel utilisateur

Polygroup

Polygroup TV30P2870K05 Manuel utilisateur

Polygroup

Polygroup TG76P3914L00 Manuel utilisateur

Polygroup

Polygroup TG76P3B20Y14 Manuel utilisateur

Polygroup

Polygroup TG76M4A25C07 Manuel utilisateur

Polygroup

Polygroup TGC0P4766L02 Manuel utilisateur

Polygroup

Polygroup H208532 Manuel utilisateur

Polygroup

Polygroup Home Heritage TG70M3W92D00 Manuel utilisateur

Polygroup

Polygroup TV50M3AVBL00 Manuel utilisateur

Polygroup

Polygroup EZ Connect Color Blast TG66P4826P00 Manuel utilisateur

Polygroup

Polygroup DAP-T-116PA/100CL-B Manuel utilisateur

Polygroup

Polygroup AR-P17005 Manuel utilisateur

Polygroup

Polygroup TG90P2657D21 Manuel utilisateur

Manuels sapin artificiel populaires d'autres marques

Trim a Home

Trim a Home TY-S6-250L Manuel utilisateur

Sears

Sears Donner & Blitzen M44814 Manuel utilisateur

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuel utilisateur

Costway

Costway CM23595US Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuel utilisateur

Holiday Living

Holiday Living TV40EH339C01 Manuel utilisateur

CASARIA

CASARIA DBGB001 Manuel utilisateur

Alpine

Alpine CRD100L-WT Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuel utilisateur

CASARIA

CASARIA 104006 Manuel utilisateur

Alpine

Alpine CRD111S-GN Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1001540584 Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuel utilisateur

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuel utilisateur

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1004363936 Manuel utilisateur

Polytree

Polytree TG66EH148C17 Manuel utilisateur