Polygroup TGC0P3499C00 Manuel utilisateur

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from This tree comes with

Quick Set® technology-Set up and light up your tree in less than 10 minutes! Carefully

follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS MADE IN CHINA

MODEL #: TGC0P3499C00

3. Each tree section is numbered with a tag. Please identify all sections before assembling.

4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective

cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into

the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches,be sure that all

wires are free of branch hinges.

7. Insert green label plug into the wall outlet.(see Fig. B ), your entire tree should now be lit. If some bulbs

do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the

plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of

your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

*Electrical Rating For The Tree

(For Indoor Use Only)

3.74A 120V 60Hz

Fig. B - Tree and Light Assembly

Section 5

Section 4

Section 3

Section 2

Section 1

Insert

Green Label

Plug Into Wall

Outlet

Please scan code to

learn how to shape

and set up your tree

1. Pull apart the legs of the stand so that

they are snapped into an x-shape, place the

tree stand on a level surface.

2. When inserting the bottom section of the tree

into the assembled stand, insert and turn the

eyebolts into the stand and tighten until the

tree pole is firmly secured.

To close the stand, remove the eyebolts, press

the metal button and fold the legs together.

Fig. A - Tree Stand Assembly Eye Bolt

Click

Eye Bolt

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

Top view Side view

Fig. C

Polygroup®!

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and power cord is plugged into the wall

outlet. (If the tree comes with a foot pedal, try stepping on the on/off button).

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

4. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. E)

TROUBLE SHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit

trees spare bulbs and fuses are also included. If extra

parts are needed, please contact our customer service

center.

SPARE PARTS

ASSEMBLY INSTRUCTIONS MADE IN CHINA

Fig. E

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact

us at 1-888-919-0070 or visit our website at www.polygroup.com.One of our customer service

representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Fig. D

1. Unplug extension cord from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to

remove from section below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section

below and fold all branches toward the pole until the bottom section

is removed from the tree stand. Cover the cap on the poles to avoid

damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5.When not in use, please store your tree in a cool, dry place away from

sunlight. Exposing your tree toexcessive heat or humidity may damage your tree.

STORAGE INSTRUCTIONS

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform

look.Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

Table des matières

Autres manuels Polygroup sapin artificiel

Polygroup

Polygroup TG76M2W75L07 Manuel utilisateur

Polygroup

Polygroup TG60EH117X01 Manuel utilisateur

Polygroup

Polygroup TG70P3D88L14 Manuel utilisateur

Polygroup

Polygroup TG90P3499C07 Manuel utilisateur

Polygroup

Polygroup TG70M2R88D00 Manuel utilisateur

Polygroup

Polygroup TV70M4G26C01 Manuel utilisateur

Polygroup

Polygroup TGC000NY1C00 Manuel utilisateur

Polygroup

Polygroup TG76P5458D00 Manuel utilisateur

Polygroup

Polygroup TG76P4724D03 Manuel utilisateur

Polygroup

Polygroup TV46P7001X00 Manuel utilisateur

Polygroup

Polygroup Ashland TG76M4G64D02 Manuel utilisateur

Polygroup

Polygroup TG76P2540D13 Manuel utilisateur

Polygroup

Polygroup TGC0P3499C01 Manuel utilisateur

Polygroup

Polygroup TG76P4474P00 Manuel utilisateur

Polygroup

Polygroup TG76P3739P00 Manuel utilisateur

Polygroup

Polygroup TV50M3AVBL00 Manuel utilisateur

Polygroup

Polygroup TG76M6010C09 Manuel utilisateur

Polygroup

Polygroup TGA0M4865S00 Manuel utilisateur

Polygroup

Polygroup TG60M2S14C02 Manuel utilisateur

Polygroup

Polygroup TG70P3D94D00 Manuel utilisateur

Polygroup

Polygroup TG76M2AFBD00 Manuel utilisateur

Polygroup

Polygroup AR-P17008 Manuel utilisateur

Polygroup

Polygroup TV90M4G26C02 Manuel utilisateur

Polygroup

Polygroup TG76M5224C00 Manuel utilisateur

Manuels sapin artificiel populaires d'autres marques

Trim a Home

Trim a Home TY-S6-250L Manuel utilisateur

Sears

Sears Donner & Blitzen M44814 Manuel utilisateur

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuel utilisateur

Costway

Costway CM23595US Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuel utilisateur

Holiday Living

Holiday Living TV40EH339C01 Manuel utilisateur

CASARIA

CASARIA DBGB001 Manuel utilisateur

Alpine

Alpine CRD100L-WT Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuel utilisateur

CASARIA

CASARIA 104006 Manuel utilisateur

Alpine

Alpine CRD111S-GN Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1001540584 Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuel utilisateur

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuel utilisateur

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1004363936 Manuel utilisateur

Polytree

Polytree TG66EH148C17 Manuel utilisateur