PNI Face 600 Manuel utilisateur
EN
User manual
2
DE
Benutzerhandbuch
43
ES
Manual de usuario
85
FR
Manuel utilisateur
127
HU
Használati utasítás
169
IT
Manuale utente
211
PL
Instrukcja obsługi
253
RO
Manual de utilizare
295
PNI Face 600
Time and attendance terminal / Zeitterminal und Teilnahmeterminal /
Terminal de tiempo y asistencia / Terminal de Gestion de Temps de Présence
/ Ujjlenyomat Biomitric időmegjelenítési rendszer / Terminale di rilevazione
presenze / Terminal dostepu / Sistem de pontaj biometric si control acces
1
Face & Fingerprint Recognition Terminal
Chapter 1. Introduction.
Year after year, face attendance machine sales are growing at a
geometric growth rate, and the market demand is increasing gradually
with the shift of the market and also due to the exposure of its capabili-
ties, our company has launched a series of products based on facial
recognition technology.
This product is designed for the needs of enterprises and institutions
for offline attendance management featuring high recognition speed,
and accuracy. The product comes with full color display and it also
supports TCP / IP, wifi, U disk upload and download.
Chapter 2. Installation Guide
Quick Installation Guide
2
Face & Fingerprint Recognition Terminal
● Insert the supplied power adapter to its socket at the back of the
device；
● Insert RJ45 cable into its socket also located at the back of the
device；
● Wall mounting: The mounting bracket shall be installed with the top
two screws 1.15m above ground, please ensure the back of the mount-
ing bracket is flush against the wall
● With the mounting bracket installed, slide the device gently into
place making sure the two flaps at the top of the bracket is aligned with
the device’s slots and that the bottom of the device cover the screw
hole at the bottom of the mounting frame, then secure the device to
the mounting bracket with the supplied screw
● The device defaults with no managers enrolled, please register a
manager or administrator level user.
Chapter 3. User registration and delete
To provide anti-tamper protection, we recommend registering a
manager or administrator as the first user
● If no advanced users are registered on the device , press the“ ”
icon on the top left corner of the display to begin enrollment
● If there is a registered manager/administrator, said advanced users
must pass authentication after pressing the “ ”icon to gain access to
its menu
● If the machine is set up with an administrator level user, managers
would no longer be able to access the advanced settings and commu-
nication settings menu
A. Enroll
● “ ”icon → User → Enroll
3
Face & Fingerprint Recognition Terminal
Note: To ensure proper configuration for its intended use, there should
be at least one manager level or administrator level user.
Enter the User ID (preset is the lowest unused user ID number), Depart-
ment ID into “Part”, Name and the User level “Level”.
To make use of the search function and keep better track of records, we
recommend completing the forms properly
Press “OK” to begin registering a user.
Now follow any sections below from 1-8 to finish registration for the
respective parts
1. Face registration
● “ ”icon → User → Enroll → Enter Your info → Choose “Face” →
Follow the onscreen instructions to complete Facial template acquisi-
tion. → Press “OK”
Looking at the display, align your face with the center of the camera’s
field of view. The camera automatically captures the facial template,
progress box shows progress. “Face Registration Success!”message will
be displayed upon completion.*
4
Face & Fingerprint Recognition Terminal
* The device has built in duplicate enrollment protection, registration
will fail if the user is already registered
2. Fingerprint registration
Proper Positioning of finger:
Position your finger flat at the center of the fingerprint sensor, Below
are the top view and side views of the correct fingerprint enrollment
process and also examples of bad enrollment.
5
Face & Fingerprint Recognition Terminal
● “ ”icon → User → Enroll → Enter Your info → Choose “Fingerprint”
→ Choose the number on the sides according to the desired input
finger / input the number manually by pressing the box → Press “OK”
→ Capture fingerprint 3 times → Press “Continue” for more fingers or
“Exit” to finish
3. Proximity card registration
●“ ”icon → User → Enroll → Enter Your info → Choose card →
Present your card to the reader → Display will show the card’s number
→ Press “OK”
6
Face & Fingerprint Recognition Terminal
4. Password registration
● “ ”icon → User → Enroll → Enter Your info → Choose password →
Enter the same 3-6 digit number combination for the two forms →
press “OK”
5. Photo registration
● “ ”icon → User → Enroll → Enter Your info → Choose “photo” →
When ready, press “Take Photo” → Press “Register” → “photo registra-
tion successful”
7
Face & Fingerprint Recognition Terminal
6.Verification Mode
● “ ”icon → User → Enroll → Enter Your info → Choose “Verification
Mode” → Choose verification method → Press “OK”
* System default is the preferred verification mode set in Advanced
settings Chapter5
7. User Timezone
● “ ”icon → User → Enroll → Enter Your info → “User Timezone” →
Press on a time zone to edit its number* → Enter the timezone group
number → Press “OK”
8
Face & Fingerprint Recognition Terminal
*You may select up to 5 preset timezones when the user is allowed
access. To define Timezones, refer to Chapter 9 Access.
8. Fingerprint Alarm
● “ ”icon → User → Enroll → Enter Your info → Choose “Fingerprint
Alarm”
i.“Register” allows you to enroll a new fingerprint while also setting it as
a duress alarm trigger
→ Press a number using the hand map as reference or click the input
box to input your number → Press “OK”→ Scan your finger three times
→ Press “Continue” to set more fingers as duress alarm triggers or
“Exit” to finish.
9
Face & Fingerprint Recognition Terminal
ii.“Set” is used to set a previously registered finger (if any) as a duress
alarm trigger
→ Press a previously enrolled finger and the device will automatically
detect the finger number → Press “OK”then “Yes” to confirm
iii.“Remove” and “Remove all” removes only the duress alarm trigger
but keeps the fingerprint on file.
In the case of alarm, Press “ ”icon if you are a manager/ administra-
tor, then press “Alarm off”
10
Table des matières
Langues :
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
